The rolling texture formed in the conventional cold rolling process of commercially pure titanium (CP-Ti) for producing a metal sheet significantly limits the potential applications of CP-Ti sheets in various industrial sectors by impairing the formability. Here, we report that by exploiting a twinning-induced crystallographic texture modification, the rolling texture can be weakened and dispersed effectively, leading to a simultaneous improvement in the formability and yield strength. A two-stage cold rolling process was designed with intermediate annealing at a late stage of the conventional cold rolling process to generate deformation twins. The intermediate annealing drove the activation of $$\{11\bar{2}2\}$$ twin and $$\{11\bar{2}2\}$$ – $$\{10\bar{1}2\}$$ double twin in the second stage of the rolling process by removing the internal reaction stress developed in the first stage of the rolling process through recrystallization, and the crystallographic feature of the $$\{11\bar{2}2\}$$ twinned region, i.e., $$\{11\bar{2}2\}$$ twin texture, was effective for <a> type slips and $$\{10\bar{1}2\}$$ twinning to accommodate a through-thickness strain as well as for reducing the planar anisotropy. This enhanced thinning capability and reduced planar anisotropy in the $$\{11\bar{2}2\}$$ twin texture led to an improvement of the formability. We demonstrated the feasibility of the suggested two-stage cold rolling process with ASTM grade 2 CP-Ti.
Graphene is a promising candidate used to reduce friction and wear in micro- and nano-device applications owing to its superior mechanical robustness and intrinsic lubrication properties. Herein, we report the frictional and wear resistance properties of a graphene-coated polymer and how they are affected by fabrication processes. The results show that graphene deposited on a polymer substrate effectively improves both frictional and wear resistance properties, and the degree of improvement significantly depends on the graphene transfer method and interfacial adhesion between graphene and the substrate. Dry-transferred graphene showed better improvement than wet-transferred graphene, and the strong adhesion of graphene achieved by imidazole treatment aided the improvement. A combined analysis of surface morphology and scratch trace shows that the graphene transfer method and graphene adhesion dominate the structural integrity of the transferred graphene, and the graphene/substrate interfacial adhesion plays a decisive role in the improvement of both properties by suppressing the delamination of graphene from the substrate during the nanoscratch test, thereby preventing crack formation in graphene and weakening the puckering effect.
The retention of electrical performance under the combined conditions of mechanical strain and an electrical current is essential for flexible electronics. Here, we report that even below the critical current density required for electromigration, the electrical current can significantly deteriorate the electromechanical performance of metal film/polymer substrate systems. This leads to a loss of stretchability, and this effect becomes more severe with increasing strain as well as increasing current. The local increase of electrical resistance in the metal film caused by damage, such as localized deformations, cracks, etc., locally raises the temperature of the test sample via Joule heating. This weakens the deformation resistance of the polymer substrate, accelerating the necking instability, and consequently leading to a rapid loss of electrical conductivity with strain. To minimize such a current-induced deterioration of the polymer-supported metal films, we develop and demonstrate the feasibility of two methods that enhance the deformation resistance of the polymer substrate at elevated temperatures: increasing the thickness of the polymer substrate, and utilizing a polymer substrate with a high glass transition temperature.