During construction works, it is advisable to prevent strong thawing and an increase in the moisture content of the foundations of engineering structures in the summer. Since the density of water and ice differ, due to the difference bulging of the foundation sections can occur when it freezes back in winter. In this work, the effect of fiber-reinforced piles on the thermal field of the surrounding soil is investigated numerically; that is, the study of the influence of aggregates with high and low thermal-physical properties on the temperature of frozen soils is conducted. Basalt and steel fiber reinforcement are compared. The difficulty of this work is that the inclusions inside piles are too small compared to the pile itself. Therefore, to solve the Stefan problem, a generalized multiscale finite element method (GMsFEM) was used. In the GMsFEM, the usual conforming partition of the domain into a coarse grid was used. It allowed reducing problem size and, consequently, accelerating the calculations. Results of the multiscale solution were compared with fine-scale solution, the accuracy of GMsFEM was investigated, and the optimal solution parameters were defined. Therefore, GMsFEM was shown to be well suited for the designated task. Collation of basalt and steel fiber reinforcement showed a beneficial effect of high thermal conductive material inclusion on freezing of piles in winter.
12 April 2017 in Lecture Notes in Computer Science
Numerical modeling of the stress–strain state of composite materials such as fiber-reinforced concrete is a considerable computational challenge. Even if a computational grid with the resolution of all inclusions is built, it will take a great amount of time for the most powerful clusters to calculate the deformations of one concrete block with ideal parallelization. To solve this problem, the method of numerical homogenization is actively used. However, when plastic deformations are taken into account, the numerical homogenization becomes much more complicated due to nonlinearity. In this work, the description of the anisotropic nature of the hardening of the composite material and the numerical homogenization for the J2 flow with isotropic hardening is proposed. Here, the deformation of a composite material with a periodic arrangement of inclusions in the form of fibers is considered as a model problem. In this case, the assumption is made that inclusions have pure elastic properties. Numerical homogenization of the elasticity and plasticity parameters is performed on the representative element. The novelty of the work is related to the attempt at hardening parameter homogenization. The calculated effective parameters are used to solve the problem on a coarse mesh. The accuracy of using the computational algorithm is checked on model problems in comparison with the hardening parameters of the base material. The finite element implementation is built using the FEniCS computing platform and the fenics-solid library.
The development of concrete buildings is related with the complex reinforcement of initial material. A way to improve concrete’s strength is to include metallic or polymer fibers. The numerical modelling of such composite materials is a computational challenge. Calculating deformations of single fiber-reinforced concrete block using a grid with the resolution of all inclusions is a very large-scale computational problem. To solve these problems, one can use numerical homogenization method. When plastic deformations are taken into account, the numerical homogenization becomes complicated due to nonlinearity. In this work, we present a simplified computational algorithm to describe the anisotropic nature of the composite material with isotropic hardening using numerical homogenization. As a model problem, a deformation of a composite material with a periodic arrangement of inclusions in the form of fibers is considered. Numerical homogenization of the elasticity and plasticity tangent is performed on the representative element. The calculated effective parameters are used to solve the problem on a coarse mesh. The accuracy of using the computational algorithm is checked in comparison with the original solution using a fine mesh with fiber resolution. The numerical results show good accuracy for the cases of interest.