The effect of equal-channel angular pressing (ECAP) on stress corrosion cracking (SCC) behavior of a cast AZ61 Mg alloy was investigated in distilled water (DW) using the slow strain rate tensile test (SSRT) at a strain rate of 1 × 10−6 s−1. The fine-grained alloy after ECAP showed a greater SCC susceptibility but a higher ultimate tensile strength, compared with the as-cast counterpart. The results were attributed to refined grains, high-density dislocations and increased proportion of high-angle grain boundaries induced by severe plastic deformation, as well as isolated fine β-phase particles transiting from net-like β-phase.
Naturally exposed rusted rebar has been widely used for the production of reinforced concrete. However, rusted rebar is prone to corrosion under chloride ion (Cl−) contamination and/or at a low alkalinity of concrete. This study employed two surface modification methods, sand blasting and wire brushing, to augment the corrosion resistance of naturally exposed rusted rebar. Electrochemical tests revealed that the surface-modified rebar displayed a significant improvement of passivation in the concrete alkaline environment and anticorrosion performance in both the Cl− free and Cl−-containing simulated concrete pore solutions of different alkalinity. The enhanced performance was mainly due to the elimination of the rust layer and the direct exposure of the fresh metallic surface to the alkaline medium. Moreover, the effect of surface nanograins on the intensified passive film led to the best passivation performance of the wire-brushed rebar. The overall findings demonstrate that the two developed methods were conducive to the passivation and anticorrosion performance of the rusted rebar and thereby hold great promise for improving the service life of the reinforced concrete structures.