The effect of equal-channel angular pressing (ECAP) on stress corrosion cracking (SCC) behavior of a cast AZ61 Mg alloy was investigated in distilled water (DW) using the slow strain rate tensile test (SSRT) at a strain rate of 1 × 10−6 s−1. The fine-grained alloy after ECAP showed a greater SCC susceptibility but a higher ultimate tensile strength, compared with the as-cast counterpart. The results were attributed to refined grains, high-density dislocations and increased proportion of high-angle grain boundaries induced by severe plastic deformation, as well as isolated fine β-phase particles transiting from net-like β-phase.
6 December 2023 in Journal of Materials Research and Technology
In this research, corrosion behavior and discharge capabilities of the AZ61-In alloy experiencing hot rolling process have been discussed in detail. The results reveal that the introduction of indium to magnesium facilitates the dissolution of magnesium by augmenting a quantity of secondary phases, generating less-protective products. The corrosion resistance of AZI plus 50 % rolling reduction is improved attributed to the preferred basal orientation and further recrystallization. Moreover, the average discharge potentials of AZI-50 % can respectively reach −1.551 V and −1.234 V at 10 mA cm −2 and 50 mA cm−2, showing potential for application in seawater activated batteries.