This comparative study inspects the heat transfer characteristics of magnetohydrodynamic (MHD) nanofluid flow. The model employed is a two-phase fluid flow model. Water is utilized as the base fluid, and zinc and titanium oxide ($\mathrm{Zn}$ and ${\mathrm{TiO}}_2$) are used as two different types of nanoparticles. The rotation of nanofluid is considered along the z-axis, with velocity ${\omega }^{*}$. A similarity transformation is used to transform the leading structure of partial differential equations to ordinary differential equations. By using a powerful mathematical BVP-4C technique, numerical results are obtained. This study aims to describe the possessions of different constraints on temperature and velocity for rotating nanofluid with a magnetic effect. The outcomes for the rotating nanofluid flow and heat transference properties for both types of nanoparticles are highlighted with the help of graphs and tables. The impact of physical concentrations such as heat transference rates and coefficients of skin friction are examined. It is noted that rotation increases the heat flux and decreases skin friction. In this comparative study, $\mathrm{Zn}$-water nanofluid was demonstrated to be a worthy heat transporter as compared to ${\mathrm{TiO}}_2$-water nanofluid.

Heat and mass transfer rate by using nanofluids is a fundamental aspect of numerous industrial processes. Its importance extends to energy efficiency, product quality, safety, and environmental responsibility, making it a key consideration for industries seeking to improve their operations, reduce costs, and meet regulatory requirements. So, the principal objective of this research is to analyze the heat and mass transfer rate for three-dimensional magneto hydrodynamic nanoliquid movement with thermal radiation and chemical reaction over the dual stretchable surface in the existence of an inclined magnetization, and viscous dissipation. The flow is rotating with constant angular speed $${\upomega }^{*}$$ω ∗ about the axis of rotation because such flows occur in the chemical processing industry and the governing equations of motion, energy, and concentration are changed to ODEs by transformation. The complex and highly nonlinear nature of these equations makes them impractical to solve analytically so tackled numerically at MATLAB. The obtained numerical results are validated with literature and presented through graphs and tables. Increasing the Eckert number from $$5\le Ec\le 10,$$5 ≤ E c ≤ 10 , a higher Nusselt and Sherwood number was noted for the hybrid nanofluid. By changing the angle of inclination $$\alpha$$α , the $${Nu}_{x}$$Nu x performance is noted at 8% for nanofluid and 33% for hybrid nanofluid. At the same time, $${Sh}_{x}$$Sh x performance of 0.5% and 2.0% are observed respectively. Additionally, as the angle of inclination increases the skin friction decreases and the chemical reaction rate increases the mass transmission rate.

This research analyzes the three-dimensional magneto hydrodynamic nanofluid flow through chemical reaction and thermal radiation above the dual stretching surface in the presence of an inclined magnetic field. Different rotational nanofluid and hybrid nanofluids with constant angular velocity $${\upomega }^{*}$$ ω ∗ for this comparative study are considered. The constitutive relations are used to gain the equations of motion, energy, and concentration. This flow governing extremely non-linear equations cannot be handled by an analytical solution. So, these equations are transformed into ordinary differential equalities by using the similarity transformation and then handled in MATLAB by applying the boundary values problem practice. The outcomes for the considered problem are accessed through tables and graphs for different parameters. A maximum heat transfer amount is observed in the absence of thermal radiation and when the inclined magnetic field and axis of rotation are parallel.

This research investigates the two different hybrid nanofluid flows between two parallel plates placed at two different heights, $y_0$and $y_h$, respectively. Water-based hybrid nanofluids are obtained by using $A{l}_2{O}_3$, $Ti{O}_2$ and $Cu$ as nanoparticles, respectively. The upper-level plate is fixed, while the lower-level plate is stretchable. The fluid rotates along the y-axis. The governing equations of momentum, energy and concentration are transformed into partial differential equations by using similarity transformations. These transformed equations are grasped numerically at MATLAB by using the boundary value problem technique. The influence of different parameters are presented through graphs. The numerical outcomes for rotation, Nusselt, Prandtl, and Schmidt numbers are obtained in the form of tables. The heat transfer rate increases by augmentation in the thermophoresis parameter, while it decays by increasing the Reynolds number. Oxide nanoparticles hybrid nanofluid proved more efficient as compared to mixed nanoparticles hybrid nanofluid. This research suggests using oxide nanoparticles for good heat transfer.