Net buoyancy, as the main power source for the motion of an underwater glider, is affected by the pump or bladder that the glider adopts to change its buoyancy force in water. In this study, a new underwater glider that can dive to a depth of 400 m at a cruising speed of 2 knots, which is faster than conventional underwater gliders and is less affected by sea currents, is investigated. The UG resisting 400 m pressure on the buoyancy engine and achieving 2 knots’ speed was designed and constructed. For this UG, its steady-state attitude was studied according to the variance of the buoyancy center and the center of gravity with the buoyancy engine influenced by the displacement of the movable mass block. In motion simulation of the UG, the attitude of the UG under different displacement conditions was simulated in Simulink according to the displacements of the piston and the movable mass block. To validate the simulation performance, a UG was constructed and experiments were conducted. The simulation and experimental results were compared to show the reliability of the simulation results under limited conditions.
30 April 2025 in Journal of Ocean Engineering and Technology
This paper describes the definition of robot functions and conceptual design for the effective development of a diver safety support robot: the nautical advanced diving intelligent assistance system (NADIA). It is designed to support divers’ safe activities by monitoring them in close proximity, aiming to prevent the majority of diving accidents caused by individual negligence. Through literature analysis, expert consultations, and direct experience, we derived the concept of diver support for the robot, and based on existing diver-centered diving scenarios, we established robot-based diver support scenarios. This process allowed us to define the robot’s functions and derive specific design plans for their implementation. The derived functions require the robot to have a lightweight and compact form with high degrees of motion freedom for dexterous movement; AI-based capabilities to estimate the diver’s position, posture, and status; precise autonomous control and self-localization technologies for close-proximity support; and the ability to use a display, sound, or light to convey information and alerts during diving. To implement these functions, design elements such as modularization and vector arrangement of propulsion units were derived. By defining and refining these required functions, we aimed to enhance the robot’s practicality and enable the successful execution of the project.
31 December 2020 in Journal of Ocean Engineering and Technology
This study proposes a system identification (SI) technique based on the constrained recursive least squares (CRLS) method to model the dynamics of the P-SUROII. By simplifying the dynamic model in consideration of the inherent characteristics of underwater vehicles and minimizing the number of parameters to be estimated, the proposed approach aims to improve estimation accuracy. In addition, a simplified thruster input model was applied to quantify the actual thruster output and improve the reliability of the input data. To satisfy the persistent excitation (PE) condition during the estimation process, experiments incorporating various motion modes were designed, and free-running and S-shaped maneuvering tests were additionally conducted to validate the model’s generalization capability and prediction performance. The coefficients estimated using the CRLS method, which is robust to noise and bias, were evaluated using quantitative similarity metrics such as root mean squared error (RMSE) and mean absolute error (MAE), confirming their validity. The proposed method effectively captures the actual dynamics of the underwater vehicle and is expected to serve as a key enabling technology for the future development of high-performance control systems and autonomous operation systems.
31 August 2024 in Journal of Ocean Engineering and Technology
Autonomous underwater vehicles (AUVs) have a limited bandwidth for real-time communication, limiting rapid responses to unexpected obstacles. This study addressed how AUVs can navigate to a target without a pre-existing obstacle map by generating one in real-time and avoiding obstacles. This paper proposes using forward-looking sonar with an occupancy grid map (OGM) for real-time obstacle mapping and a potential field algorithm for avoiding obstacles. The OGM segments the map into grids, updating the obstacle probability of each cell for precise, quick mapping. The potential field algorithm attracts the AUV towards the target and uses repulsive forces from obstacles for path planning, enhancing computational efficiency in a dynamic environment. Experiments were conducted in coastal waters with obstacles to verify the real-time obstacle mapping and avoidance algorithm. Despite the high noise in sonar data, the experimental results confirmed effective obstacle mapping and avoidance. The OGM-based potential field algorithm was computationally efficient, suitable for single-board computers, and demonstrated proper parameter adjustments through two distinct scenarios. The experiments also identified some of challenges, such as dynamic changes in detection rates, propulsion bubbles, and changes in repulsive forces caused by sudden obstacles. An enhanced algorithm to address these issues is currently under development.