The objective of this study was to perform fault diagnosis (FD) specific to various faults that can occur in the thrusters of remotely operated vehicles (ROVs) during hovering control. Underwater thrusters are predominantly utilized as propulsion systems in the majority of ROVs and are essential components for implementing motions such as trajectory tracking and hovering. Faults in the underwater thrusters can limit the operational capabilities of ROVs, leading to permanent damage. Therefore, this study focused on the FD for faults frequently caused by external factors such as entanglement with floating debris and propeller breakage. For diagnosing faults, a data-based technique that identifies patterns according to data characteristics was utilized. In imitation of the fault situations, data for normal, breakage and entangled conditions were acquired, and Density-Based Spatial Clustering of Applications with Noise (DBSCAN) was employed to differentiate between these fault conditions. The proposed methodology was validated by configuring an ROV and conducting experiments in an engineering water tank to verify the performance of the FD.
31 December 2020 in Journal of Ocean Engineering and Technology
The Twin Hybrid Autonomous Underwater Vehicle (THAUV) is an underwater monitoring system consisting of a twin buoyant body and a fixed wing mounted between them. It is equipped with two propeller thrusters and a pair of elevators at the aft end. As a new type of underwater vehicle, it combines the long endurance of an underwater glider (UG), the high-speed maneuverability of an autonomous underwater vehicle (AUV), and the ability to carry larger payloads. In this paper, the motion equations of the THAUV are established, and its simulation model is developed using SIMULINK. Computational fluid dynamics (CFD) is further employed to identify hydrodynamic parameters under different elevator size conditions. A case study is conducted to analyze the effects of three different widths of elevators on glide performance, including gliding speed, pitching angle, and gliding trajectory. CFD results show that when the elevator deflection angle is zero, the hydrodynamic forces acting on the THAUV increase as the elevator width increases under identical angle of attack and velocity conditions. Under CFD conditions with fixed angle of attack and flow velocity, the sensitivity of the hydrodynamic characteristics to elevator deflection became significantly more pronounced. Increasing the elevator deflection angle led to substantial growth in the generated hydrodynamic forces. Motion simulations further show that increasing the elevator deflection angle enhances the THAUV’s gliding performance. Comparative results also reveal that glide performance improves with larger elevator width.