This paper investigates the kinematics and statics of a 3-UPU robot in screw coordinates. According to the definition of a twist, both the angular velocity of a rigid body and the linear velocity of a point on it are expressed in screw components. The twist equation is established to calculate the position and posture of each joint. This equation can be applied directly to analyze the statics. According to the definition of a wrench, both the force and torque of the planar linkages are expressed in wrench components. As a result, the wrench equations are established to express the resultant action of a force system in one coordinate frame. Compared with the traditional Cartesian coordinate method, the wrench equation is free from complex algebraic manipulation and convenient to obtain wrench matrix by Plücker coordinates of each wrench. Numerical calculation is applied to solve the kinematics which can conveniently depict the position and posture of each joint in the absolute coordinate frame. Six unknown variables can be solved with each equation of wrench that contains three forces and three torques. The kinematics and static analysis of the 3−UPU robot validate this method.
This paper presents an algorithm for the kinematics and statics analysis of a Gough–Stewart platform. Through defining the velocity screw, the relative angular and linear velocities of a single rigid body can be expressed as a single vector. The velocity screw equations of various mechanisms are deduced in detail, the forward and inverse kinematics of a parallel mechanism can be solved through the velocity screw equation. Similarly, the definition of the force screw allows all constraint forces and torques of a single rigid body to be expressed using a single vector, and the static screw equation can be used to solve the forward and inverse statics of a parallel mechanism in one coordinate system. The advantage of this approach is that kinematics and statics modeling are unified in screw coordinates because the kinematic parameters in screw form can be directly employed in statics modeling. The results of the kinematics and statics analysis of the Gough-Stewart platform validate this method. This algorithm is easy to compute and program with high efficiency, and it can also be applied to any other spatial, complex multi-rigid-body systems.
In this paper, a parallel mechanism with two rotational degrees of freedom is proposed. It could rotate freely and continuously around the two coordinate axes at the fixed origin of the coordinate frame. The structure of the mechanism is a second-order over constraint parallel structure and the moving platform and base platform are connected by five kinematic chains. The motion characteristics of this structure are analyzed by reciprocal screw equation. Then, the kinematics and dynamics modelling are carried out systematically in a unified way. The kinematics of the mechanism is established by means of screws, the displacements and accelerations of each joint and any point on a link could be calculated by the kinematic screw equation directly. The analysis of acceleration and its mathematical expression in screw form are given, and the acceleration matrix could be applied into the dynamic analysis based on the Newton–Euler equation. All the constraint forces and torques could be obtained by a single set of Newton–Euler equations.
In this paper, a two-rotational degrees of freedom parallel mechanism with five kinematic subchains (3UPS-UPU-S) (U, P, and S stand for universal joints, prismatic joints, and spherical joints) for an aerospace product is introduced, and its kinematic and dynamic characteristics are subsequently analyzed. The kinematic and dynamic analyses of this mechanism are carried out in screw coordinates. Firstly, the inverse kinematics is performed through the kinematic equations established by the velocity screws of each joint to obtain the position, posture, and velocity of each joint within the mechanism. Then, a dynamic modeling method with screw theory for multi-body systems is proposed. In this method, the momentum screws are established by the momentum and moment of momentum according to the fundamentals of screws. By using the kinematic parameters of joints, the dynamic analysis can be carried out through the dynamic equations formed by momentum screws and force screws. This method unifies the kinematic and dynamic analyses by expressing all parameters in screw form. The approach can be employed in the development of computational dynamics because of its simplified and straightforward analysis procedure and its high adaptability for different kinds of multi-body systems.
This paper investigates the kinematics and dynamics of multi-rigid-body systems in screw form. The Newton–Euler dynamics equations are established in screw coordinates. All forces and torques of the multi-rigid-body system can be solved straightforwardly since they are explicit in the form of screw coordinates. The displacement and acceleration are unified in matrix form, which associates the kinematics and dynamics with variable of velocity. A one-step numerical algorithm only is needed to solve the displacements and accelerations. As a result, all absolute displacements, velocities, and accelerations are directly obtained by one kinematic equation. The kinematics and dynamics of Gough–Stewart platform validate this the method. In this paper, the kinematics and dynamics are carried out with the example of a Gough–Stewart platform, which represents the most complex multi-rigid-body system, to verify the computational dynamics method. The proposed algorithm is also fit for the kinematics and dynamics modeling of other multi-rigid-body systems.
1 July 2022 in Journal of Autonomous Vehicles and Systems