The capabilities of ceramic PZT transducers, allowing for elastic wave excitation in a broad frequency spectrum, made them particularly suitable for the Structural Health Monitoring field. In this paper, the approach to detecting impact damage in composite structures based on harmonic excitation of PZT sensor in the so-called pitch–catch PZT network setup is studied. In particular, the repeatability of damage indication for similar configuration of two independent PZT networks is analyzed, and the possibility of damage indication for different localization of sensing paths between pairs of PZT sensors with respect to damage locations is investigated. The approach allowed for differentiation between paths sensitive to the transmission mode of elastic wave interaction and sensitive reflection mode. In addition, a new universal Bayesian approach to SHM data classification is provided in the paper. The defined Bayesian classifier is based on asymptotic properties of Maximum Likelihood estimators and Principal Component Analysis for orthogonal data transformation. Properties of the defined algorithm are compared to the standard nearest-neighbor classifier based on the acquired experimental data. It was shown in the paper that the proposed approach is characterized by lower false-positive indications in comparison with the nearest-neighbor algorithm.

This study is an experimental research on non-linear effects occurring in vibro-acoustic modulation tests. The work focuses on the analysis of the modulation type. The modulation of the response signal is due to interaction between low- and high-frequency excitation and damage surfaces, which results in the formation of higher harmonics and sidebands. The analysis of the sidebands is an extremely important issue. Their presence may indicate damage in structure. In many cases, the sidebands can be used to determine the damage index. However, not always, the distribution of the sidebands and their evaluation with excitation amplitude allow for an unambiguous interpretation. This may be the result of various damage-related non-linearity sources, which depend on the amplitude of the excitation. Because different types of non-linearities are manifested in different ways, the change in non-linearity type can cause, for example, the disappearance of odd sidebands and/or even harmonics or change in modulation type. To analyse the indicated issues, the sample with prepared contact surfaces was tested in experimental works. Two excitation types, low and high frequencies, are introduced into the structure via electromagnetic shaker and piezoelectric transducer, respectively, to produce contact-related non-linear effects. The contact surfaces are driven to move relative to each other. For a given scenario, the analysis of modulation sidebands is performed based on signal response. The instantaneous frequency approach is used to evaluate modulation type. The results show that the changes in the amplitude of the excitation change the modulation type of response signal. The probable causes of this phenomenon are given.

The development of a machine’s condition monitoring system is often a challenging task. This process requires the collection of a sufficiently large dataset on signals from machine operation, context information related to the operation conditions, and the diagnosis experience. The two referred problems are today relatively easy to solve. The hardest to describe is the diagnosis experience because it is based on imprecise and non-numerical information. However, it is essential to process acquired data to develop a robust monitoring system. This article presents a framework for a system dedicated to recommending processing algorithms for condition monitoring. It includes a database and fuzzy-logic-based modules composed within the system. Based on the contextual knowledge provided by the user, the procedure suggests processing algorithms. This paper presents the evaluation of the proposed agent on two different parallel gearboxes. The results of the system are processing algorithms with assigned model types. The obtained results show that the algorithms recommended by the system achieve a higher accuracy than those selected arbitrarily. The results obtained allow for an average of 5 to 14.5% higher accuracy.

Condition monitoring is an indispensable element related to the operation of rotating machinery. In this article, the monitoring system for the parallel gearbox was proposed. The novelty detection approach is used to develop the condition assessment support system, which requires data collection for a healthy structure. The measured signals were processed to extract quantitative indicators sensitive to the type of damage occurring in this type of structure. The indicator’s values were used for the development of four different novelty detection algorithms. Presented novelty detection models operate on three principles: feature space distance, probability distribution, and input reconstruction. One of the distance-based models is adaptive, adjusting to new data flowing in the form of a stream. The authors test the developed algorithms on experimental and simulation data with a similar distribution, using the training set consisting mainly of samples generated by the simulator. Presented in the article results demonstrate the effectiveness of the trained models on both data sets.

Two performance parameters are particularly important for the assessment of structural health monitoring (SHM) systems, i.e., their damage detection capabilities and risk of false positive indications due to varying environmental and operational conditions (EOCs). A reduced ratio of false-positive indications can be of significant importance for particular applications, for example, in aerospace, where the costs of unplanned maintenance procedures can be very high. In such cases, the reduction of the false calls ratio can be critical for the possibility of the practical application of the system, apart from damage detection efficiency and system costs. Among various sensor technologies, PZT networks are proven to be one of the most universal approaches to SHM, and they were successfully applied in different scenarios. Moreover, many EOCs which may have an impact on the risk of false positive indications have been identified. Over the years, different approaches to the influence of EOCs compensation have been proposed. Compensation methods can be tailored to the particular way in which a given measurement condition, for example, ambient temperature, alters signals acquired by the PZT network or can be formulated to be also applied in the more general case. In the paper, a method for enhancement of damage detection efficiency under influence of EOCs of general nature is proposed. The particular measurement condition affecting signals acquired by PZT sensors neither needs to be measured, which could be hard in some cases, but also nor even have to be identified. The efficiency of the proposed compensation algorithms is verified based on the example of experimental results obtained under varying temperatures.