An exciting electrochemical oxidation (EO) process has been developed. Compared with electro-Fenton (EF) and electro-coagulation (EC) processes, this process had more advantages in the degradation of methylene blue. It is observed that methylene blue can be quickly degraded by EO, in which an iron rod is used as an anode, graphite is used as a cathode, and fly ash–red mud particles are used as particle electrodes. Compared to EC and EF processes that are affected by specific pH values, EO has excellent performance in the pH range of 3.0–11.0. In addition, the electric energy consumption (EEC) of EF, EC and EO is 81.51, 36.55 and 21.35 kW h m⁻³ respectively, suggesting EO is more economical. The free radical scavenging mechanism of i-PrOH is studied, and the contribution of EC, EF and fly ash–red mud particle electrodes in EO is inferred. Particle electrodes before and after use are characterized by SEM, EDS and BET to illustrate the role of particle electrodes in the EO system. Analysis of flocs and solutions by FTIR and GC-MS proves that EO can effectively degrade methylene blue, and the degradation route of methylene blue is speculated. The particle electrode dissolution experiment shows that the prepared fly ash–red mud particle electrode is considered to be suitable and safe for wastewater treatment. Finally, in actual surface water experiments, the EO process still has great potential.

Residual antibiotics in water are often persistent organic pollutants. The purpose of this study was to prepare a cellulose nanocrystals/graphene oxide composite (CNCs-GO) with a three-dimensional structure for the removal of the antibiotic levofloxacin hydrochloride (Levo-HCl) in water by adsorption. The scanning electron microscope, Fourier transform infrared (FT-IR), energy-dispersive spectroscopy, X-ray photoelectron spectroscopy and other characterization methods were used to study the physical structure and chemical properties of the CNCs-GO. The three-dimensional structure of the composite material rendered a high surface area and electrostatic attraction, resulting in increased adsorption capacity of the CNCs-GO for Levo-HCl. Based on the Box–Behnken design, the effects of different factors on the removal of Levo-HCl by the CNCs-GO were explored. The composite material exhibited good antibiotic adsorption capacity, with a removal percentage exceeding 80.1% at an optimal pH of 4, the adsorbent dosage of 1.0 g l ⁻¹ , initial pollutant concentration of 10.0 mg l ⁻¹ and contact time of 4 h. The adsorption isotherm was well fitted by the Sips model, and kinetics studies demonstrated that the adsorption process conformed to a quasi-second-order kinetics model. Consequently, the as-synthesized CNCs-GO demonstrates good potential for the effective removal of antibiotics such as levofloxacin hydrochloride from aqueous media.