Saxitoxin (STX) belongs to the family of marine biological toxins, which are major contaminants in seafood. The reference methods for STX detection are mouse bioassay and chromatographic analysis, which are time-consuming, high costs, and requirement of sophisticated operation. Therefore, the development of alternative methods for STX analysis is urgent. Electrochemical analysis is a fast, low-cost, and sensitive method for biomolecules analysis. Thus, in this study, an electrolyte-insulator-semiconductor (EIS) sensor based on aptamer-modified two-dimensional layered Ti₃C₂T_x nanosheets was developed for STX detection. The high surface area and rich functional groups of MXene benefited the modification of aptamer, which had specific interactions with STX. Capacitance-voltage (C-V) and constant-capacitance (ConCap) measurement results indicated that the aptasensor was able to detect STX with high sensitivity and good specificity. The detection range was 1.0 nM to 200 nM and detection limit was as low as 0.03 nM. Moreover, the aptasensor was found to have a good selectivity and two-week stability. The mussel tissue extraction test suggested the potential application of this biosensor in detecting STX in real samples. This method provides a convenient approach for low-cost, rapid, and label-free detection of marine biological toxins.

Saxitoxin (STX) is a highly toxic and widely distributed paralytic shellfish toxin (PSP), posing a serious hazard to the environment and human health. Thus, it is highly required to develop new STX detection approaches that are convenient, desirable, and affordable. This study presented a label-free electrolyte-insulator-semiconductor (EIS) sensor covered with a layer-by-layer developed positively charged Poly (amidoamine) (PAMAM) dendrimer. An aptamer (Apt), which is sensitive to STX was electrostatically immobilized onto the PAMAM dendrimer layer. This results in an Apt that is preferably flat inside a Debye length, resulting in less charge-screening effect and a higher sensor signal. Capacitance-voltage and constant-capacitance measurements were utilized to monitor each step of a sensor surface variation, namely, the immobilization of PAMAM dendrimers, Apt, and STX. Additionally, the surface morphology of PAMAM dendrimer layers was studied by using atomic force microscopy and scanning electron microscopy. Fluorescence microscopy was utilized to confirm that Apt was successfully immobilized on a PAMAM dendrimer-modified EIS sensor. The results presented an aptasensor with a detection range of 0.5–100 nM for STX detection and a limit of detection was 0.09 nM. Additionally, the aptasensor demonstrated high selectivity and 9-day stability. The extraction of mussel tissue indicated that an aptasensor may be applied to the detection of STX in real samples. An aptasensor enables marine toxin detection in a rapid and label-free manner.

Organic electrochemical transistors (OECTs), as an emerging device for the development of novel biosensors, have attracted more and more attention in recent years, demonstrating their promising prospects and commercial potential. Functional OECTs have been widely applied in the field of biosensors due to their decisive advantages, such as high transconductance, easy functionalization, and high integration capability. Therefore, this review aims to provide a comprehensive summary of the most recent advances in the application of functional OECT-based biosensors in biomedicine, especially focusing on those biosensors for the detection of physiological and biochemical parameters that are critical for the health of human beings. First, the main components and basic working principles of OECTs will be briefly introduced. In the following, the strategies and key technologies for the preparation of functional OECT-based biosensors will be outlined and discussed with regard to the applications of the detection of various targets, including metabolites, ions, neurotransmitters, electrophysiological parameters, and immunological molecules. Finally, the current main issues and future development trends of functional OECT-based biosensors will be proposed and discussed. The breakthrough in functional OECT-based biosensors is believed to enable such devices to achieve higher performance, and thus, this technology could provide new insight into the future field of medical and life sciences.

Biomimetic olfactory and taste biosensors replicate human sensory functions by coupling selective biological recognition elements (such as receptors, binding proteins, or synthetic mimics) with highly sensitive transducers (including electrochemical, transistor, optical, and mechanical types). This review summarizes recent progress in olfactory and taste biosensors focusing on three key areas: (i) materials and device design, (ii) artificial intelligence (AI) and data fusion for real-time decision-making, and (iii) pathways for practical application, including hybrid platforms, Internet of Things (IoT) connectivity, and regulatory considerations. We provide a comparative analysis of smell and taste sensing methods, emphasizing cases where integrating both modalities enhances sensitivity, selectivity, detection limits, and reliability in complex environments like food, environmental monitoring, healthcare, and security. Ongoing challenges are addressed with emerging solutions such as antifouling/self-healing interfaces, modular cartridges, machine learning (ML)-assisted calibration, and manufacturing-friendly approaches using scalable microfabrication and sustainable materials. The review concludes with a practical roadmap advocating for the joint development of receptors, materials, and algorithms; establishment of open standards for long-term stability; implementation of explainable/edge AI with privacy-focused analytics; and proactive collaboration with regulatory bodies. Collectively, these strategies aim to advance biomimetic smell and taste biosensors from experimental prototypes to dependable, commercially viable tools for continuous chemical sensing in real-world applications.