Technologies for the isolation of lignin from pulping process streams are reviewed in this article. Based on published data, the WestVaco process, the LignoBoost process, the LigoForce SystemTM and the SLRP process are reviewed and discussed for the isolation of lignin from Kraft black liquor. The three new processes that have now joined the WestVaco process are compared from the perspective of product quality. Further, isolation processes of lignosulfonates from spent sulfite liquor are reviewed. The limitation for this review is that data are only available from lab scale and pilot scale experiments and not from industrial processes. Key output of this paper is a technology summary of the state of the art processes for technical lignins, showing the pros and cons of each process.
23 October 2020 in Chemical Engineering & Technology
The neutralization of NaOH with CO2 in a continuously operated airlift reactor with gas flow rates up to 10 NL min−1 and gas phase recycle was investigated. Neutralization experiments were performed at 25 °C and the amount of absorbed CO2, as well as the NaOH feed rate, were recorded. The reaction rate was calculated based on the two‐film theory and empirical equations for several parameters. The calculations of the volumetric mass transfer coefficient, the liquid phase circulation velocity, and the gas holdup were experimentally validated. The reaction rate and the process efficiency were modeled with a deviation of 5 %.
In the present study, the influence of long-term heat treatment of black liquor with focus on a subsequent lignin precipitation process was investigated. The well-known CO2 approach to precipitate a certain amount of lignin from heat-treated black liquor was studied within defined thermal conditions. Several important characteristics of lignin such as molar mass and functional groups were analysed. Viscosity and buffer capacity of black liquor were also studied. Results showed a reduction in lignin yield as a result of a decrease in molar mass and lignin demethylation after the heat treatment. The acid consumption during precipitation was found to be higher after the heat treatment.