Technologies for the isolation of lignin from pulping process streams are reviewed in this article. Based on published data, the WestVaco process, the LignoBoost process, the LigoForce SystemTM and the SLRP process are reviewed and discussed for the isolation of lignin from Kraft black liquor. The three new processes that have now joined the WestVaco process are compared from the perspective of product quality. Further, isolation processes of lignosulfonates from spent sulfite liquor are reviewed. The limitation for this review is that data are only available from lab scale and pilot scale experiments and not from industrial processes. Key output of this paper is a technology summary of the state of the art processes for technical lignins, showing the pros and cons of each process.
Kraft lignin can be extracted from black liquor generated during wood digestion. At present, water soluble kraft lignin is prepared chemically. Here, a method for the preparation of a purified form of CO2‐precipitated softwood kraft lignin, which forms a stable aqueous solution at a pH value of 8.9 is described. The lignin samples are characterized by thermogravimetric analysis, IR spectroscopy, nuclear magnetic resonance spectroscopy, and gel permeation chromatography. The comparison of water‐washed lignin with reference samples of unwashed‐ and acid‐washed lignin shows that the water‐washed lignin has a higher molecular weight compared to the reference samples, while the content of hydroxyl and methoxyl groups is similar. Solubility studies show that drying of washed lignin has a significant effect on its dissolution in water. Charge titration and dynamic light scattering experiments show that water‐washed lignin forms a stable colloid in aqueous solution.
31 December 2022 in Separation and Purification Technology
The present work develops the basics for the isolation of lactic acid, acetic acid and formic acid from a single as well as a mixed feed stream, as is present, for example, in fermentation broth for lactic acid production. Modelling of the phase equilibria data is performed using the law of mass action and shows that the acids are extracted according to their pka value, where formic acid is preferably extracted in comparison to lactic and acetic acid. Back-extraction was performed by 1 M NaHCO3 solution and shows the same tendency regarding the pka value. Based on lactic acid, the solvent phase composition, consisting of tri-n-octylamine/1-octanol/n-undecane, was optimized in terms of the distribution coefficient. The data clearly indicate that, compared to physical extraction, mass transfer can be massively enhanced by reactive extraction. With increasing tri-n-octylamine and 1-octanol concentration, the equilibrium constant increases. However, even when mass transfer increases, tri-n-octylamine concentrations above 40 wt%, lead to third phase formation, which needs to be prevented for technical application. The presented data are the basis for the transfer to liquid membrane permeation, which enables the handling of emulsion tending systems.
In today’s linear economy, waste streams, environmental pollution, and social–economic differences are increasing with population growth. The need to develop towards a circular economy is obvious, especially since waste streams are composed of valuable compounds. Waste is a heterogeneous and complex matrix, the selective isolation of, for example, polyphenolic compounds, is challenging due to its energy efficiency and at least partially its selectivity. Extraction is handled as an emerging technology in biorefinery approaches. Conventional solid liquid extraction with organic solvents is hazardous and environmentally unfriendly. New extraction methods and green solvents open a wider scope of applications. This research focuses on the question of whether these methods and solvents are suitable to replace their organic counterparts and on the definition of parameters to optimize the processes. This review deals with the process development of agro-food industrial waste streams for biorefineries. It gives a short overview of the classification of waste streams and focuses on the extraction methods and important process parameters for the isolation of secondary metabolites.