Pierre-André Jacques

Dr. Pierre-André Jacques

CEA Liten, Grenoble, France

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 May 2021 in Catalysts
Verified
Journal Article
Open access
PDF file
PTPierre Toudret
Pierre Toudret
JBJean-François Blachot
Jean-François Blachot
MHMarie HEITZMANN
Marie HEITZMANN
PJPierre-André Jacques
Pierre-André Jacques
In this work, platinum group metal (PGM) free-based cathode active layers were prepared using different printing techniques. The membrane electrode assemblies (MEAs) integrate a PGM free catalyst based on Fe, N and C atoms at the cathode side. Scanning electron microscopy (SEM) images of MEA cross sections showed the strong impact of the fabrication process on the cathode structure, the porosity and the ionomer repartition. The MEAs were characterized in a 25 cm2 single cell using cyclic voltammetry under H2/N2. The performance of the MEAs and the double layer capacity of the cathodes were also shown to be linked to the process used. The comparison of the electrochemical accessible surface of the catalyst and of its surface area (SBET) led to the determination of a utilization factor. The coated membrane (CCM) made using the decal transfer process gives the best performances.

21 June 2019 in Beilstein Journal of Nanotechnology
Verified
Journal Article
Open access
SLStéphane Louisia
Stéphane Louisia
YTYohann Thomas
Yohann Thomas
PLPierre Lecante
Pierre Lecante
MHMarie HEITZMANN
Marie HEITZMANN
MAM. Rosa Axet
M. Rosa Axet
Philippe SerpPhilippe Serp
Philippe Serp
Sulfur- (S-CNT) and nitrogen-doped (N-CNT) carbon nanotubes have been produced by catalytic chemical vapor deposition (c-CVD) and were subject to an annealing treatment. These CNTs were used as supports for small (≈2 nm) Pt3M (M = Co or Ni) alloyed nanoparticles that have a very homogeneous size distribution (in spite of the high metal loading of ≈40 wt % Pt), using an ionic liquid as a stabilizer. The electrochemical surface area, the activity for the oxygen reduction reaction and the amount of H2O2 generated during the oxygen reduction reaction (ORR) have been evaluated in a rotating ring disk electrode experiment. The Pt3M/N-CNT catalysts revealed excellent electrochemical properties compared to a commercial Pt3Co/Vulcan XC-72 catalyst. The nature of the carbon support plays a key role in determining the properties of the metal nanoparticles, on the preparation of the catalytic layer, and on the electrocatalytic performance in the ORR. On N-CNT supports, the specific activity followed the expected order Pt3Co > Pt3Ni, whereas on the annealed N-CNT support, the order was reversed.

5 September 2018 in Catalysts
Verified
Journal Article
Open access
PDF file
EREmeline Remy
Emeline Remy
YTYohann Thomas
Yohann Thomas
LGLaure Guetaz
Laure Guetaz
FFFrederic FOUDA-ONANA
Frederic FOUDA-ONANA
PJPierre-André Jacques
Pierre-André Jacques
MHMarie HEITZMANN
Marie HEITZMANN
In this work, N-doped Multi-Walled Carbon Nanotubes (MWCNTs) and Few Graphene Layers (FGLs) have been functionalized with platinum nanoparticles using two methods starting with hexachloroplatinic acid as precursor: (i) ethylene glycol (EG) reduction and (ii) impregnation followed by reduction in hydrogen atmosphere. Morphological scanning transmission electron microscopy (STEM) analyses showed a homogenous dispersion of metal particles with narrow-size distribution onto both carbon supports (Pt/C loadings between 30 wt % and 40 wt %). Electrocatalytic properties of the as-synthetized catalysts toward the Oxygen Reduction Reaction (ORR) was evaluated in aqueous electrolyte using a three electrodes electrochemical cell by cyclic voltammetry (CV) in rotating disk electrode (RDE). It is shown that a mixture of Pt supported on MWCNT and FGLs allows to enhance both the electrochemical surface area and the activity of the catalyst layer. Ageing tests performed on that optimized active layer showed higher stability than conventional Pt/C.