Marie HEITZMANN

Dr. Marie HEITZMANN

orcid

Research Focus & Metrics

Academic Career Length

9Years (2018-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 May 2021 in Catalysts
Verified
Journal Article
Open access
PDF file
PTPierre Toudret
Pierre Toudret
JBJean-François Blachot
Jean-François Blachot
MHMarie HEITZMANN
Marie HEITZMANN
PJPierre-André Jacques
Pierre-André Jacques
In this work, platinum group metal (PGM) free-based cathode active layers were prepared using different printing techniques. The membrane electrode assemblies (MEAs) integrate a PGM free catalyst based on Fe, N and C atoms at the cathode side. Scanning electron microscopy (SEM) images of MEA cross sections showed the strong impact of the fabrication process on the cathode structure, the porosity and the ionomer repartition. The MEAs were characterized in a 25 cm2 single cell using cyclic voltammetry under H2/N2. The performance of the MEAs and the double layer capacity of the cathodes were also shown to be linked to the process used. The comparison of the electrochemical accessible surface of the catalyst and of its surface area (SBET) led to the determination of a utilization factor. The coated membrane (CCM) made using the decal transfer process gives the best performances.

21 November 2024 in Journal of Power Sources
Verified
Journal Article
Open access
CLClémence Lafforgue
Clémence Lafforgue
PTPierre Toudret
Pierre Toudret
FMFabrice Micoud
Fabrice Micoud
MHMarie HEITZMANN
Marie HEITZMANN
JBJean-François Blachot
Jean-François Blachot
MCMarian Chatenet
Marian Chatenet

21 June 2019 in Beilstein Journal of Nanotechnology
Verified
Journal Article
Open access
SLStéphane Louisia
Stéphane Louisia
YTYohann Thomas
Yohann Thomas
PLPierre Lecante
Pierre Lecante
MHMarie HEITZMANN
Marie HEITZMANN
MAM. Rosa Axet
M. Rosa Axet
Philippe SerpPhilippe Serp
Philippe Serp
Sulfur- (S-CNT) and nitrogen-doped (N-CNT) carbon nanotubes have been produced by catalytic chemical vapor deposition (c-CVD) and were subject to an annealing treatment. These CNTs were used as supports for small (≈2 nm) Pt3M (M = Co or Ni) alloyed nanoparticles that have a very homogeneous size distribution (in spite of the high metal loading of ≈40 wt % Pt), using an ionic liquid as a stabilizer. The electrochemical surface area, the activity for the oxygen reduction reaction and the amount of H2O2 generated during the oxygen reduction reaction (ORR) have been evaluated in a rotating ring disk electrode experiment. The Pt3M/N-CNT catalysts revealed excellent electrochemical properties compared to a commercial Pt3Co/Vulcan XC-72 catalyst. The nature of the carbon support plays a key role in determining the properties of the metal nanoparticles, on the preparation of the catalytic layer, and on the electrocatalytic performance in the ORR. On N-CNT supports, the specific activity followed the expected order Pt3Co > Pt3Ni, whereas on the annealed N-CNT support, the order was reversed.

28 September 2021 in Nanomaterials
Verified
Journal Article
Open access
PDF file
TSTheo Suter
Theo Suter
ACAdam Clancy
Adam Clancy
NCNoelia Rubio Carrero
Noelia Rubio Carrero
MHMarie HEITZMANN
Marie HEITZMANN
LGLaure Guetaz
Laure Guetaz
DBDan Brett
Dan Brett
Polymer electrolyte fuel cells hold great promise for a range of applications but require advances in durability for widespread commercial uptake. Corrosion of the carbon support is one of the main degradation pathways; hence, corrosion-resilient graphene has been widely suggested as an alternative to traditional carbon black. However, the performance of bulk graphene-based electrodes is typically lower than that of commercial carbon black due to their stacking effects. This article reports a simple, scalable and non-destructive method through which the pore structure and platinum utilisation of graphene-based membrane electrode assemblies can be significantly improved. Urea is incorporated into the catalyst ink before deposition, and is then simply removed from the catalyst layer after spraying by submerging the electrode in water. This additive hinders graphene restacking and increases porosity, resulting in a significant increase in Pt utilisation and current density. This technique does not require harsh template etching and it represents a pathway to significantly improve graphene-based electrodes by introducing hierarchical porosity using scalable liquid processes.

5 September 2018 in Catalysts
Verified
Journal Article
Open access
PDF file
EREmeline Remy
Emeline Remy
YTYohann Thomas
Yohann Thomas
LGLaure Guetaz
Laure Guetaz
FFFrederic FOUDA-ONANA
Frederic FOUDA-ONANA
PJPierre-André Jacques
Pierre-André Jacques
MHMarie HEITZMANN
Marie HEITZMANN
In this work, N-doped Multi-Walled Carbon Nanotubes (MWCNTs) and Few Graphene Layers (FGLs) have been functionalized with platinum nanoparticles using two methods starting with hexachloroplatinic acid as precursor: (i) ethylene glycol (EG) reduction and (ii) impregnation followed by reduction in hydrogen atmosphere. Morphological scanning transmission electron microscopy (STEM) analyses showed a homogenous dispersion of metal particles with narrow-size distribution onto both carbon supports (Pt/C loadings between 30 wt % and 40 wt %). Electrocatalytic properties of the as-synthetized catalysts toward the Oxygen Reduction Reaction (ORR) was evaluated in aqueous electrolyte using a three electrodes electrochemical cell by cyclic voltammetry (CV) in rotating disk electrode (RDE). It is shown that a mixture of Pt supported on MWCNT and FGLs allows to enhance both the electrochemical surface area and the activity of the catalyst layer. Ageing tests performed on that optimized active layer showed higher stability than conventional Pt/C.

11 July 2025 in ECS Meeting Abstracts
Verified
Journal Article
Closed access
MHMarie HEITZMANN
Marie HEITZMANN
EPEugénie Perrin
Eugénie Perrin
CCCaroline Celle
Caroline Celle
Proton exchange membrane fuel cells (PEMFCs) are electrochemical devices gaining significant attention in the context of the energy transition. A critical component of these systems, carbon-supported platinum nanoparticles (Pt/C) catalysts used in PEMFC are the subject of extensive research aimed at enhancing their durability [1,2]. The durability of catalysts is closely linked to the type of carbon support employed. In practical systems, these materials are subject to substantial degradation processes, including carbon support corrosion and the degradation of platinum active sites through mechanisms such as nanoparticle migration, dissolution, coalescence, and Ostwald ripening [3]. These challenges are especially pronounced at the cathode and the sluggish oxygen reduction reaction (ORR) takes place. To address the dual issues of performance and durability, mesoporous carbon supports present a promising solution for PEMFC catalysts. These materials provide several advantages, including a high specific surface area for enhanced performance and improved durability by anchoring platinum nanoparticles within pores, making them less susceptible to degradation and ionomer poisoning [4,5]. The properties of the carbon used as a catalyst support, particularly its structural characteristics, are pivotal in mitigating degradation processes and, as a result, enhancing the stability of PEMFC electrodes. This study aims to investigate the impact of mesoporous carbon structures on the durability of PEMFC catalysts. To achieve this, two key parameters are examined: the optimization of mesoporosity and the hydrophilicity of the carbon, as wettability has been shown to significantly affect the performance and durability of the catalyst layer [6]. Three carbon supports with varying grain size, graphitization levels, hydrophilicity, BET surface area, and mesoporous volumes were selected for the synthesis of 40 wt% Pt/C catalysts via a polyol method. These carbons and the resulting catalysts were characterized using a range of physico-chemical analysis techniques to assess and compare their structural and chemical properties. Given the critical role of water in the operation of membrane electrode assemblies (MEAs), dynamic vapor sorption (DVS) measurements were conducted to evaluate the hydrophilicity and sorption behavior of the materials, including carbons and catalysts. The synthesized catalysts were incorporated into standardized cathodic catalyst layers through ink formulation, coating, and transfer onto PEM membranes. They were subjected to accelerated electrochemical degradation in a 1.8 cm² differential cell using an AST protocol designed to simulate carbon support degradation, particularly during start-up and shut-down phases [7]. Advanced electrochemical characterization techniques were employed throughout the degradation cycles to monitor changes at the cathode. Periodic post-mortem analyses were also performed to supplement the electrochemical findings. The combined results offer promising initial trends and novel insights into the role of mesoporous structures in the durability of catalytically active layers. They highlight the importance of selecting optimal structural and physico-chemical properties to enhance electrode longevity. References (1) Gröger, O.; Gasteiger, H. A.; Suchsland, J.-P. Review—Electromobility: Batteries or Fuel Cells? J. Electrochem. Soc. 2015, 162 (14), A2605–A2622. https://doi.org/10.1149/2.0211514jes. (2) Yoshizumi, T.; Kubo, H.; Okumura, M. Development of High-Performance FC Stack for the New MIRAI; 2021; pp 2021-01–0740. https://doi.org/10.4271/2021-01-0740. (3) Meier, J. C.; Galeano, C.; Katsounaros, I.; Witte, J.; Bongard, H. J.; Topalov, A. A.; Baldizzone, C.; Mezzavilla, S.; Schüth, F.; Mayrhofer, K. J. J. Design Criteria for Stable Pt/C Fuel Cell Catalysts. Beilstein J. Nanotechnol. 2014, 5, 44–67. https://doi.org/10.3762/bjnano.5.5. (4) Sakthivel, M.; Drillet, J.-F. An Extensive Study about Influence of the Carbon Support Morphology on Pt Activity and Stability for Oxygen Reduction Reaction. Applied Catalysis B: Environmental 2018, 231, 62–72. https://doi.org/10.1016/j.apcatb.2018.02.050. (5) Daimon, H.; Yamazaki, S.; Asahi, M.; Ioroi, T.; Inaba, M. A Strategy for Drastic Improvement in the Durability of Pt/C and PtCo/C Alloy Catalysts for the Oxygen Reduction Reaction by Melamine Surface Modification. ACS Catal. 2022, 12 (15), 8976–8985. https://doi.org/10.1021/acscatal.2c01942 (6) Nagamori, K.; Aoki, S.; Ikegawa, M.; Tamoto, K.; Honda, Y.; Seki, Y.; Igarashi, H.; Uchida, M. Impacts of Pt/Carbon Black Catalyst Surface Hydrophilicity on Ionomer Distribution and Durability during Water-Generating Load Cycling of Polymer Electrolyte Fuel Cells. ACS Appl. Energy Mater. 2023, 6 (22), 11481–11496. https://doi.org/10.1021/acsaem.3c01706 (7) U.S. DRIVE Fuel Cell Tech Team. Cell Component Accelerated Stress Test and Polarization Curve Protocols for PEM Fuel Cells. U.S. Department of Energy January 14, 2013. https://www.energy.gov/eere/fuelcells/articles/fuel-cell-tech-team-accelerated-stress-test-and-polarization-curve. Figure 1