As mobile communication devices proliferate and industries, such as artificial intelligence and big data rapidly expand, optical communication systems have seen a significant surge in capacity. This has necessitated the use of various multiplexing technologies to boost the transmission capabilities of optical networks. Wavelength division multiplexing (WDM) stands out as the most cost-effective and efficient method to enhance communication capacity without altering the existing network infrastructure. However, the operational wavelength range of WDM is constrained by the gain bandwidth of the employed optical amplifiers.1,2 The erbium-doped fiber amplifier (EDFA) is the go-to optical amplifier in WDM systems, even though its gain bandwidth covers only a fraction of the low-loss window of standard single-mode fibers.3 Raman fiber amplifiers, which theoretically offer a broader gain bandwidth, have not gained widespread use in WDM systems due to their higher pump power requirements, leading to substantial system power consumption.4,5 Consequently, developing optical amplifiers that offer both wide bandwidth and low-power-consumption is critical for enhancing the transmission capacity of optical communication networks.
Rare-earth-doped bismuth silicate (Bi4Si3O12, BSO) crystal is a multifunctional material for scintillation, LED, and laser applications. In the present study, Er3+ and Yb3+ ions co-doped bismuth silicate crystals were grown by a modified vertical Bridgman method, and their spectral properties were investigated for the first time. Transparent Er/Yb: BSO single crystal up to Φ 25 mm × 30 mm was obtained. The segregation coefficient of the Er/Yb: BSO crystal was measured to be 0.96 for Er3+ ions and 0.91 for Yb3+ ions. Absorption and fluorescence spectra had been recorded in the range of 200–1700 nm. The absorption cross section was calculated to be 6.96 × 10−20 cm2 at 976 nm with the full width at half maximum (FWHM) of 8 nm, and the emission cross section was 0.9771 × 10−20 cm2 at 1543 nm with FWHM of 16 nm. The fluorescence decay curve was measured at 976 nm excitation. By linear fitting, the fluorescence lifetime of the upper 4I13/2 level of Er3+ was 8.464 ms at room temperature. Compared with Er3+ ion-doped bismuth silicate crystal (Er: BSO), the Er/Yb: BSO crystal has a wider FWHM and larger absorption cross section. The results indicate that the Er/Yb: BSO crystal is a potential lasing crystal.
Dynamically tunable metasurfaces employing chalcogenide phase-change materials (PCMs) such as Ge2Sb2Te5 alloys have garnered significant attention and research efforts. However, the utilization of chalcogenide PCMs in dynamic metasurface devices necessitates protection, owing to their susceptibility to volatilization and oxidation. Conventional protective layer materials such as Al2O3, TiO2, and SiO2 present potential drawbacks including diffusion, oxidation, or thermal expansion coefficient mismatch with chalcogenide PCMs during high-temperature phase transition, severely limiting the durability of chalcogenide PCM-based devices. In this paper, we propose, for the first time to our knowledge, the utilization of chalcogenide glass characterized by high thermal stability as a protective material for chalcogenide PCM. This approach addresses the durability challenge of current dynamic photonic devices based on chalcogenide PCM by virtue of their closely matched optical and thermal properties. Building upon this innovation, we introduce an all-chalcogenide dynamic tunable metasurface filter and comprehensively simulate and analyze its characteristics. This pioneering work paves the way for the design and practical implementation of optically dynamically tunable metasurface devices leveraging chalcogenide PCMs, ushering in new opportunities in the field.
The long-wave infrared band, which at room temperature covers the infrared radiation of humans and objects, has significant applications across various fields including wireless communication, national defense, military, biomedical, and advanced driver assistance systems. Metalens provides a pathway to lightweight, compact, and integrated solutions for infrared imaging and sensing systems, marking an inevitable trend in future development. This study presents a design for a high numerical aperture of 0.89 in a polarization-insensitive all-chalcogenide metalens operating at 10 µm, utilizing the commercially available chalcogenide glass material As2Se3 via a transmission phase approach. Building upon this, we have achieved, for the first time, a high numerical aperture of 0.84 for an all-chalcogenide broadband LWIR achromatic metalens operating in the 9.5–10.5 µm range, with significantly improved focusing performance through the application of particle swarm optimization algorithms. The superior performance of the all-chalcogenide LWIR metalens, combined with the advantages of chalcogenide glass over traditional LWIR materials such as Si or Ge—namely, lower cost, reduced optical loss, and a smaller thermo-optic coefficient—suggests it has significant potential for broader applications.