A low-profile antenna-triplexer is realized using substrate integrated waveguide (SIW) technology for radio altimeter/WLAN/ISM band applications. The antenna is composed of two SIW cavity resonators where a smaller cavity is nested inside the larger one. The larger cavity is excited by using two distinct microstrip feedlines while smaller one by a coax-probe. The antenna produces three distinct resonances around 4.18, 5.2, and 5.8 GHz simultaneously employing one annular slot and two transverse slots. By exciting cavity modes (TE110/TE120) and the patch mode (TM010) simultaneously, an average isolation of better than 23 dB is accomplished among three input ports. As compared to the conventional counterparts, the proposed geometry is simple to realize in compact space. To validate the proposed idea, the design is experimentally tested and the measured responses show a good agreement with the simulations. Moreover, the antenna shows front to back ratio better than 19 dB and measured gain values of 6.56, 4.2, 5.85 dBi at three resonances. The proposed design is compact, easy to fabricate and capable to integrate with planar circuits.
31 January 2019 in IEEE Transactions on Antennas and Propagation
In this paper, a cavity-backed slot antenna is proposed using substrate integrated waveguide (SIW) technology for Wi-Fi/ISM band applications. This antenna comprises two SIW cavities, a rectangular and circular with a circular ring slot on the top of each cavity for radiation. The circular cavity is designed such that it is nested inside the rectangular cavity and each one is excited by separate feedlines (microstrip and coaxial probe). By properly optimizing the antenna dimensions, it produces two frequency bands at 5.2 and 5.8 GHz with a small frequency ratio of 1.12. Finally, the design is fabricated and the results are experimentally verified. The experimental results show that the proposed antenna exhibits a -10 dB impedance bandwidth of 6 % (5.04-5.35 GHz) in the lower frequency band and 3.4% (5.73-5.92 GHz) in the higher frequency band with maintaining the input port isolation better than 28 dB. Due to the SIW cavity backing structure, the antenna shows unidirectional radiation patterns at both resonant frequencies of 5.2 and 5.8 GHz with the gain of 6.97 and 6.2 dBi, respectively. Moreover, the antenna possesses the advantages of lightweight, planar configuration, and ease of fabrication.
7 October 2021 in IEEE Antennas and Wireless Propagation Letters
In this communication, a low-profile single-layered duplex-filtenna scheme is proposed by using two feeds, and a common substrate integrated waveguide (SIW) cavity. A rectangular slot is carved on the top of the cavity along the narrower side of the SIW, which splits the cavity into two unequal parts. Each part behaves as a half-mode SIW (HMSIW) resonator which radiates with the help of an additional longitudinal slot and open-end of HMSIW when excited with corresponding feed. Also, two vias have been loaded along the broad side of the transverse slot to tune the impedance bandwidth and improve the selectivity in the passbands. The working process of both HMSIW resonators is similar, thus similar type of electrical performance is expected. By properly optimizing the locations of these vias and transverse-slot dimensions, high isolation between input ports is realized. To validate the proposed concept, design has been fabricated and measured. The measured results show good agreement with the simulated counterparts. The measured result shows that the design exhibits impedance bandwidths of around 3.0% (8.63–8.88 GHz) and 4.2% (9.26 $ - $ 9.66 GHz) for lower and upper-frequency pass channel, respectively. The measured average realized gains in the broadside direction are 3.51 and 4.10 dBi, respectively.
14 March 2018 in IEEE Antennas and Wireless Propagation Letters
In this letter, a new design of self-triplexing slot antenna using substrate integrated waveguide (SIW) technique is demonstrated for multiband communication systems. The proposed antenna operates at triple frequency bands (around 6.53, 7.65, and 9.09 GHz) simultaneously utilizing a slot inserted on the top of the SIW cavity and is excited by three separate microstrip lines. By properly optimizing the antenna parameters, an isolation of better than 19 dB is realized between any two input ports, which helps to achieve self-triplexing property. The proposed triplexing antenna preserves simplicity, compactness, and a planar configuration that makes it suitable for highly integrated handheld devices. To demonstrate the significance of the proposed work, the antenna is prototyped, and experimental results show a close agreement with simulations. Moreover, the proposed antenna exhibits the measured gain of 3.1, 4.7, and 3.9 dBi at resonant frequencies with stable radiation patterns.
25 June 2022 in International Journal of Antennas and Propagation
A low-profile planar multiple-input multiple-output (MIMO) antenna consisting of four elements with isolation improvement is proposed for 5G mm Wave (24–40) GHz applications. Each radiating element of the MIMO antenna comprises of a microstrip-fed tilted spade-shaped radiator with four asymmetrical slots and a partial ground plane. The antenna is optimized to resonate at 35 GHz covering a wide impedance bandwidth from 23.9 to 40.1 GHz. Two cross lines are then loaded between the antenna elements to improve the isolation . The MIMO structure with the decoupling lines is fabricated and tested. The measured results are in good correlation with the simulated results. Other MIMO performance metrics such as the envelope correlation coefficient (ECC), channel capacity loss (CCL), diversity gain (DG), and total active reflection coefficient (TARC) are examined, and the results are found to be satisfactory for the device to be used for mm-wave 5G MIMO applications. Also, the antenna’s performance metrics such as radiation efficiency, gain, and radiation patterns over the operating band are presented.
9 October 2023 in IEEE Antennas and Wireless Propagation Letters
A compact self-diplexing antenna is presented here using substrate integrated waveguide (SIW) technology. The antenna operates at 2.45 GHz for the ISM band and 3.5 GHz for the WiMAX band. Firstly, the antenna's size is reduced by around 75% by employing the quarter-mode SIW cavity, and then further size reduction is achieved by inserting the circular complimentary split-ring resonator (CSRR) slot on each QMSIW cavity. The antenna simultaneously radiates at two distinct resonant frequencies when it is excited by microstrip feedline at individual port, offers isolation better than 33 dB in both frequency bands. Notably, the proposed antenna's uniqueness lies in its tunability, the lower frequency band can be tuned in a range of 2.45–2.75 GHz, while the upper frequency band from 3.5–3.8 GHz by rotating the CSRR slot at angles of 0°–180°. This rotation advantageously aids miniaturization and improves port-decoupling. Moreover, both the operating frequency can be tuned independently by varying the length of the cavity, radius, and angle of the CSRR slot. After experimental testing, the proposed design demonstrates exceptional alignment with the simulated results, offering peak gain of 3.5 dBi in the lower frequency band and 3.15 dBi in the upper frequency band, with a total efficiency exceeding 68%.