CO2 deep-hole presplit explosions are an important technology for enhancing gas drainage in low-permeability coal seams. In the process of a CO2 gas explosion, the initial burst crack generated by the shock wave expands the crack tip under the splitting action of high-pressure CO2 gas. To explore the effects of CO2 gas explosions on crack tips, we constructed an analytical model of gas pressure attenuation at different positions based on fluid motion equations, proposed equations for crack opening and growth rates, and inverted the energy field of the whole process of CO2 blasting. We used a test platform for the independent development of CO2 gas explosions under experimental conditions of 1 MPa axial pressure and 2 MPa CO2 gas pressure and a VIC-3D measurement system. We conducted the gas explosion experiments on prefabricated cracked samples with a crack length of 10 mm and width of 0.2 mm to analyze the dynamic response of the crack tip. The results showed that there were three stages in the propagation of a prefabricated crack under the action of a CO2 gas explosion. The first stage, from 0 to 290 ms, included energy storage at the crack tip and a maximum opening rate increment of 0.0043 m/s. The second stage, from 291 to 295 ms, was rapid crack propagation with maximum opening rate increment and propagation rates of 0.1865 and 5.35 m/s, respectively. In the third stage, from 296 to 309 ms, the crack tip propagated slowly, the maximum opening rate increment and growth rates were 0.0969 and 5.81 m/s, respectively, and the crack arrest coordinates were 4.57 and 35.28 mm. The experimental study verified the accuracy of the calculation model, proved that CO2 gas promotes the growth of crack tips, explained the spatiotemporal evolution mechanism of the CO2 explosion process, and provided experimental support for subsequent research related to explosions.
For safety engineering majors, it is very important to cultivate the practical ability of professional talents. Due to the difficulty of conducting experiments in dangerous environments, a virtual simulation experiment teaching platform was established. The platform allowed students to understand the structure of the subway ventilation room, and master the control requirements of the ventilation system in the event of sudden fire, blockage, and failure in the subway. Its construction used technologies such as 3D modeling, human–computer interaction, and VR. To test the teaching effect of the simulation experiment platform, two indexes of operating skills and cognitive load were selected to study and analyze the experimental results of students. The research adopts the method of stratified sampling, 46 boys and 10 girls were selected from the first-year students majoring in safety engineering, and they were randomly divided into experimental group and control group, with 23 boys and 5 girls in each group. The experimental group used the simulation platform for teaching, while the control group used the traditional teaching method. The score of the assessment module in the platform was taken as the index of students’ operating skills, and the cognitive load test was carried out by questionnaire to test the teaching effect. The test module scores showed that the average score of the experimental group was 32.79 points higher than that of the control group, and the results of the cognitive load test questionnaire showed that the experimental group scored 35.14% lower than the control group. The research shows that the virtual simulation experiment has a stronger teaching effect than the field experiment.
The rail transit vehicle system is an important subsystem with the most frequent operation accidents and the most direct impact on passengers. Based on the particularity of the vehicle system and the complexity of the system, the hierarchical analysis method (AHP) is used to evaluate its safety. High-order judgment matrix often has inconsistency, and the judgment matrix consistency guarantee is the key to the hierarchical analysis method applied. Based on the hierarchical analysis principle, this paper corrects the inconsistency judgment matrix and realizes the optimization calculation based on the genetic algorithm. This paper constructs a vehicle system safety evaluation index system including 26 indexes at three layers and uses the fuzzy comprehensive evaluation method to evaluate the system safety level. The results show that the calculation results based on the improved AHP-GA are significantly better than that based on the conventional AHP method. The comprehensive evaluation conclusion of the case is "average", and the safety level of the vehicle system of the case enterprise needs to be strengthened.