Poly(lactic) acid (PLA) film with 2 wt% mixed carbon nanofillers of graphene nanoplates (GNPs) and multiwall carbon nanotubes (MWCNTs) in a weight ratio of 1:1 with impurities of fullerene and carbon black (CB) was produced by layer-to-layer deposition and hot pressing. The release of carbon nanoparticles from the film was studied at varying time–temperature conditions and simulants. Migrants in simulant solvents were examined with laser diffraction analysis and transmission electron microscopy (TEM). Film integrity and the presence of migrants on the film surfaces were visualised by scanning electron microscopy (SEM). The partial dissolution of PLA polymer in the solvents was confirmed by swelling tests and differential scanning calorimetry (DSC). Nanoparticle migrants were not detected in the simulants (at the LOD 0.020 μm of the laser diffraction analysis) after migration testing at 40°C for 10 days. However, high-temperature migration testing at 90°C for 4 h provoked a release of GNPs from the film into ethanol, acetic acid and oil-based food simulants. Short carbon nanotubes were observed rarely to release in the most aggressive acetic acid solvent. Obviously, the enhanced molecular mobility at temperatures above the glass transition and partial dissolution of PLA polymer by the food simulant facilitate the diffusion processes. Moreover, shape, size and concentration of nanoparticles play a significant role. Flexible naked GNPs (lateral size 100–1000 nm) easily migrate when the polymer molecules exhibit enhanced mobility, while fibrous MWCNTs (> 1 μm length) formed entangled networks on the film surfaces as the PLA polymer is partly dissolved, preventing their release into food simulants. The impurities of fullerenes and CB (5–30 nm) were of minor concentration in the polymer, therefore their migration is low or undetectable. The total amount of released migrants is below overall migration limits. Graphical Abstract

In the presented paper attention is paid to the ball mills, semi-autogenous and autogenous mills. The applications of mills are reviewed. The most used working regime of ball mills is described. The factors, affecting the milling process are examined. The factors, related to required energy for grinding: rotational speed of the drum, type of the mill shell and drum filling factor are shown. The factors used for increasing productivity and grinding efficiency are presented. The improving factors for energy consumption per unit of production are examined, one of them is the density of the grinding media. The possible ways for increasing the productivity and grinding efficiency of drum, rod and ball mills are numbered. Some of them are: increasing the bulk volume, increasing the contact area between the grinding media components, improving the quality of the obtained product, etc. The need for a common approach for study of drum, rod and ball mill is considered.

Due to the stochastic and time-dependent character of the ice embryo formation and growth (i.e., a process that can be analyzed statistically, but cannot be predicted precisely), the heterogeneous ice nucleation on atmospheric aerosols or macroscopic solid surfaces is still shrouded in mystery, regardless of the extremely active research and exponential progress within this scientific field. For instance, whether the icing appears from outside-in or inside-out is a subject of intense controversy, with practicability in designing passive icephobic coatings or improving the effectiveness of the cryopreservation technologies. Here, we propose an artful technique for quantitative analysis of the different modes of water freezing using super-nonwettable soot-coated quartz crystal microbalances (QCMs). To achieve this goal, a set of 5 MHz QCMs are loaded one at a time with a 50 μL droplet, whose bulk or contour solidification is detected in real-time. The obtained experimental results show that our sensor devices recognize explicitly if the ice nuclei form predominantly at the liquid–solid interface or spread along the droplet’s entire outer shell by triggering individual reproducible responses in terms of the direction of signal evolution in time. Our results may serve as a foundation for the future incorporation of QCM devices in different freezing assays, where gaining information about the ice adhesion forces and ice layer’s thickness is mandatory.