Retro-reflectivity is a promising surface capability, which has attracted the interest of researchers for building applications in order to counteract Urban Heat Island (UHI) effects. This work aims at studying the impact of the substrate material on the optic performance of retro-reflective (RR) coatings. Three types of substrate materials were investigated: smooth pine wood panels, rough plywood panels, and smooth acetate sheets. The RR coating samples were made by firstly adding a high reflective white paint onto the substrate material and a homogeneous RR glass beads layer on the top. As a reference case, also diffusive samples, without RR beads, were developed. Samples have been tested through a spectrophotometric and an angular reflectivity analysis. Results show that, despite a lower global reflectance of the RR samples with respect to the diffusive ones, the glass beads coating provides a good retro-reflective capability to all the diffusive samples. Additionally, the roughest RR sample exhibited the highest RR capability of up to 16%, with respect to the other smoother samples. Future developments may involve the optimum design of RR coatings, in terms of their optic performance by varying the substrate materials and roughness, the glass beads density and dimension.
Several innovative coatings for buildings have been developed over the past decade for increasing energy savings and mitigating Urban Heat Island effect. Among such solutions, retro-reflective (RR) materials were proposed for reducing cooling energy demand especially on Cooling Dominant Zones: they reflect the incident radiation towards the incoming direction, damping down inter-building effect. In addition, thermochromic coatings (TC), which modify their colour and reflectivity by temperature, are proposed also on Heating Dominant Zones, improving efficiency of buildings throughout the year. This chapter gives a comprehensive review of the recent developments on TC and RR including applications, future developments and limits.