The use of transparent polymers as an alternative to glass has become widespread. However, the direct exposure of these materials to climatic conditions of sunlight and heat decrease the lifetime cost of these products. The aim of this study was to minimize the harm caused by ultraviolet (UV) radiation exposure to transparent poly(methylmethacrylate) (PMMA), which usually leads to changes in the physical and chemical properties of these materials and reduced performance. This was achieved using environmentally friendly cellulose acetate butyrate (CAB). The optical, morphological, and thermal properties of CAB blended with transparent PMMA was studied using UV-VIS spectrophotometry, scanning electron microscopy, X-ray diffraction, dynamic mechanical analysis, and thermal gravimetric analysis. The results show that CAB was able to reduce the effects of UV radiation by making PMMA more transparent to UV light, thereby preventing the negative effects of trapped radiation within the compositional structure, while maintaining the amorphous structure of the blend. The results also show that CAB blended with PMMA led to some properties commensurate with the requirements of research in terms of a slight increase in the value of the modulus and the glass transition temperature for the PMMA/CAB blend.
1 January 2024 in Journal of Engineering and Sustainable Development
Epoxy resins have been the subject of many studies as a consequence of their extensive usage in recent years. The brittleness and low resistance to propagation and crack initiation of epoxy resins are well-recognized characteristics. Therefore, in recent years, experts have concentrated on increasing epoxy resin's fracture resistance. Adding inorganic nanoparticles like titanium dioxide (TiO2) TiO2, silica (SiO2), carbon black, alumina (Al2O3), and others to the polymer matrix is one of the most investigated techniques in polymer science. Despite having a modest nanofiller content, the resulting nanocomposites may enhance their thermal, mechanical, rheological, electrical, and optical characteristics. These nanocomposites are an alternative to metal-based materials. They have great promise as multifunctional materials in a range of applications, including optoelectronic devices, semiconductor devices, civil engineering, automotive, and aerospace. To show potential future directions and market prospects for polymer nanocomposites reinforced with TiO2 nanoparticles, current results, and trends have been examined and highlighted. In addition, the current review surveys many studies that highlighted using nanoparticles as reinforcement, their different structure, the interface, and the geometry and structure of the resulting nano-materials reinforced resin.
Plastics are durable and inexpensive, making the levels of their production high in relation to other materials. Further, the plastics have a slow degradation process under normal conditions, and as a result they have a long life-time. These two factors have led to increasing the plastic waste, affecting, adversely, inhabitants and environment. Re-using plastic waste as additives can be viewed as one of the promising approaches to tackle this issue and, equally, can be considered a cheap way of improving many engineering materials. In the current paper, the effect of adding polypropylene (PP) waste to asphalt mixture (asphalt and aggregate) was explored. The exploration was made first by determining the best asphalt content (without polypropylene) and then investigating the effect of different percentages of PP waste on the performance of this optimal mix. The results showed that 5.5% (by mass) gives a good balance among the properties (flow value, stability and bulk density). Further, the results indicated that the PP waste has improved most asphalt mixture characteristics where bulk density and flow values tests pointed that 9% of PP is the best concentration.
في هذه الدراسة ، تم تطبيق تقنية الصب بالتحريك (SCT) لتكوين مركب الألمنيوم (Al) النانوي مع نسب وزنية مختلفة من مسحوق ثاني أكسيد التيتانيوم النانوي (TiO2). تم فحص الخصائص البنائية ,الميكانيكية والتآكل لمتراكبات النانو. دراسة البنية المجهرية تمت عن طريق المجهر الإلكتروني الماسح (SEM) ، بينما تم الحصول على التركيب البلوري للعينات باستخدام حيود الأشعة السينية (XRD). بالإضافة إلى ذلك ، تم غمر المركبات النانوية في محلول 0.5 مولاري من حمض الهيدروكلوريك لقياسات معدل التآكل والديناميكية الفعالة. أظهرت النتائج أن أفضل عينة كانت 0.03٪ ، حيث زادت الصلابة بنسبة 23٪ ، لكن قوة الشد زادت إلى 52٪. حيث أظهرت صور SEM للعينات المعززة بالجسيمات النانوية تجانسًا وانتشارًا واضحًا للجسيمات النانوية في المصفوفة. لذلك ، فإن إضافة جزيئات TiO2 النانوية إلى معدن الألمنيوم أدى إلى تحسين صلابة وقوة الشد للمركبات النانوية بشكل ملحوظ. بالمقابل أظهرت نتائج التآكل أن المواد المركبة النانوية لديها مقاومة تآكل أعلى من المواد المركبة القائمة على Al7075.
1 March 2018 in Journal of Engineering and Sustainable Development
A Transparent nanocomposite consist of polysulfone (PSF), cellulose acetate butyrate (CAB) and nano indium oxide (nanoIn2O3) was prepared by melting and re-molding so as to safeguard from the impact of ultraviolet rays. By means of scanning electron microscope (SEM), X-ray diffraction (XRD), UV-Vis spectroscopy, dynamic mechanical analysis (DMA) and thermogravimetric analysis (TGA), the morphological, optical, mechanical and thermal properties were studied. As we reported before that PSF/0.2%CAB implies low ultraviolet light absorption for PSF and CAB transparent blend. In the present study, we investigated the effect of nanoIn2O3 on the characteristics of PSF/0.2%CAB/nanoIn2O3 Tricomposite. The results showed that the inorganic nano particles are well dispersed in the PSF matrix without macro phase separation, as well as assisting to spread the organic component CAB. The UV-Vis spectroscopy showed that 0.02%nanoIn2O3 is able to shield PSF from UV radiation. So, we've got dual protection transparent eco-friendly nanocomposite from UV rays and is also able to protect the surfaces from the impact of these rays if used as a protection them. The XRD pattern of pure PSF clarified that there is a noticeable decrease in the bundle peaks in bi-composite and Tricomposite pattern. Furthermore, the Tricomposite showed high stability to temperatures lower than Tɡ.
12 December 2018 in IOP Conference Series: Materials Science and Engineering
In this work some mechanical properties of epoxy resin (DGEBA)/silica oxide (SiO2) reinforced with different weight percentage (5, 10 and 15) fiberglass investigated. A homogeneous solid colorless samples were prepared at room temperature using disposable stirrer. The study used the comparison of fiberglass different percentage concentration in order to improve strength and tenacity. Moreover, the effect of silica oxide presence in order to improve the interface surface. The results showed that (DGEBA) epoxy resin with 15% fiber glass has high tensile strength, impact and hardness. Furthermore, the addition of fiber glass improves the fracture toughness of the epoxy resin (DGEBA) and the amount of toughness. Besides, the presence of silica oxide within the sample structure led to greater coherence between the fiberglass and other parts of the composite, this is illustrated by SEM images for selected samples.