Shaoxian Bai

Dr. Shaoxian Bai


Research Focus & Metrics

Academic Career Length

13Years (2014-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
11 December 2019 in Numerical Heat Transfer, Part B: Fundamentals
Verified
Journal Article
Closed access
JXJing Xie
Jing Xie
CMChunhong Ma
Chunhong Ma
SBShaoxian Bai
Shaoxian Bai
Thermal distortion characteristics of spiral groove gas face seals are investigated for cases of high temperature. The influence of ambient temperature and temperature difference on the thermal distortion and the sealing performance is analyzed with consideration of gas thermoviscosity effect. It is found that, the thermal distortion makes the opening force decrease slightly with the increasing ambient temperature, while the thermoviscosity effect causes the leakage rate decrease obviously. Temperature difference between the inner and outer diameters plays a more important role in thermal distortion of the seal face, which results in a sharp divergence distortion accompanying with decrease of the opening force and increase of the leakage rate. This means a large temperature difference may significantly reduce the sealing performance.

6 January 2015 in Ceramics International
Verified
Journal Article
Closed access
SBShaoxian Bai
Shaoxian Bai
RWRong Wang
Rong Wang
MLMeng Li
Meng Li

16 February 2022 in Materials
Verified
Journal Article
Open access
PDF file
SBShaoxian Bai
Shaoxian Bai
JHJialin Hao
Jialin Hao
JYJing Yang
Jing Yang
YSYuansen Song
Yuansen Song
For gas–liquid medium isolation seals in aero-engines, the upstream pumping function of directional grooves provides an effective way to realize the design of longer service life and lower leakage rate. However, this produces a new problem for gas–liquid mass transfer in the sealing clearance. This study establishes an analytical model to investigate the gas–liquid mass transfer behavior and the change rule for the opening force of mechanical face seals with elliptical grooves. Compared with traditional studies, this model considers not only the gas–liquid transfer but also the cavitation effect. The results obtained show that with the increase of rotational speed, the gas medium transferred from the inner low-pressure side to the outer high-pressure side. In addition, the leakage rate of the liquid medium from the outer high-pressure side to the inner low-pressure side increased with the growth of sealing clearance, rotational speed and seal pressure. The upstream pumping effect of the gas medium with elliptical grooves not only led to a state of gas–liquid mixed lubrication in the sealing surfaces, but also significantly increased the opening capacity of the seal face. This research may provide a reasonable basis for the design of upstream pumping mechanical face seals.

28 May 2016 in Science China Technological Sciences
Verified
Journal Article
Closed access
PDF file
SBShaoxian Bai
Shaoxian Bai
RWRong Wang
Rong Wang

12 March 2023 in Materials
Verified
Journal Article
Open access
PDF file
SBShaoxian Bai
Shaoxian Bai
CCChudongdomng Chu
Chudongdomng Chu
CMChunhong Ma
Chunhong Ma
JYJing Yang
Jing Yang
SBShiyi Bao
Shiyi Bao
The force equilibrium and moment equilibrium play a significant role on the sealing performance of gas split floating ring seals. A small deflection angle may generate seriously wear on sealing surface and cause seal failure. Therefore, the thermo-hydrodynamic lubrication analysis of gas split floating ring seal with Rayleigh grooves is investigated considering the deflection angle and frictional heat of surface contact, which is beneficial to grasp the hydrodynamic characteristics and rules under high-temperature and high-speed conditions. Pressure and temperature distributions of sealing rings are numerically calculated for the cases with different deflection angle, rational speed, seal pressure and ambient temperature. Then, the hydrodynamic effect and sealing performance are analyzed. The obtained results show that, the surface Rayleigh step grooves do not present obvious hydrodynamic effect when split seal ring has no deflection. While, a significant hydrodynamic effect can be obtained when the split seal ring presents a deflection angle about dozens of micro radians. Here, a 10% increase of opening force is achieved when the deflection angle reaches 80 μrad in the case of speed 30,000 r/min and seal pressure 0.2 MPa. Moreover, the hydrodynamic effect becomes obvious with increasing deflection angle as well as rotational speed. Meanwhile, the growth of rotational speed results in an obvious increase of film temperature. The increase of ambient temperature has a significant influence on the decrease of leakage rate. When the ambient temperature increases from 340 K to 540 K, the leakage rate reduces exceeding 50%, however, it does not present obvious effect on the opening force. The proposed model has the potential to provide the theoretical basis and design guidance for surface grooves of gas split floating ring seal in the future.

13 August 2015 in Science China Technological Sciences
Verified
Journal Article
Closed access
PDF file
RWRong Wang
Rong Wang
SBShaoxian Bai
Shaoxian Bai