A new formula for the evaluation of the modal radiation Q factor is derived. The total Q of selected structures is to be calculated from the set of eigenmodes with associated eigen-energies and eigen-powers. Thanks to the analytical expression of these quantities, the procedure is highly accurate, respecting arbitrary current densities flowing along the radiating device. The electric field integral equation, Delaunay triangulation, method of moments, Rao-Wilton-Glisson basis function and the theory of characteristic modes constitute the underlying theoretical background. In terms of the modal radiation Q, all necessary relations are presented and the essential points of implementation are discussed. Calculation of the modal energies and Q factors enable us to study the effect of the radiating shape separately to the feeding. This approach can be very helpful in antenna design. A few examples are given, including a thin-strip dipole, two coupled dipoles a bowtie antenna and an electrically small meander folded dipole. Results are compared with prior estimates and some observations are discussed. Good agreement is observed for different methods.
1 January 2011 in Progress In Electromagnetics Research B
New expressions are derived to calculate the Q factor of a radiating device. The resulting relations link Q based on the frequency change of the input impedance at the input port (QX, QZ) with expressions based solely on the current distribution on an radiating device. The question of which energies of a radiating system are observable is reviewed, and then the proposed Q factor as defined in this paper is physical. The derivation is based on potential theory rather than fields. This approach hence automatically eliminates all divergent integrals associated with electromagnetic energies in infinite space. The new formulas allow us to study the radiation Q factor for antennas without feeding (through e.g., characteristic modes) as well as fed by an arbitrary number of ports. The new technique can easily be implemented in any numerical software dealing with current densities. To present the merits of proposed technique, three canonical antennas are studied. Numerical examples show excellent agreement between the measurable QZ derived from input impedance and the new expressions.
20 March 2015 in IEEE Transactions on Antennas and Propagation
The functional relation between the fractional bandwidth and the quality factor of a radiating system is investigated in this communication. Several widely used definitions of the quality factor are compared with two examples of RLC circuits that serve as a simplified model of a single-resonant antenna tuned to its resonance. It is demonstrated that for a first-order system, only the quality factor based on differentiation of the input impedance has unique proportionality to the fractional bandwidth, whereas, e.g., the classical definition of the quality factor, i.e., the ratio of the stored energy to the lost energy per one cycle, is not uniquely proportional to the fractional bandwidth. In addition, it is shown that for higher order systems, the quality factor based on differentiation of the input impedance ceases to be uniquely related to the fractional bandwidth.
8 December 2011 in IEEE Antennas and Wireless Propagation Letters
Modal methods are used to effectively design a dual-band orthogonally polarized fractal patch antenna. This letter summarizes the workflow from generating a fractal motif through modal analysis to feeding design and full-wave analysis. As the antenna's feeding and matching structure, a dual L-probe was proposed to widen its bandwidth. The full-wave simulation is in very good agreement with the measurement. The motif size is 50 × 50 mm2, and the antenna operates at 1.25 and 2.1 GHz. The relative bandwidths are 4.18% and 11.4%, respectively.
21 June 2019 in IET Microwaves, Antennas & Propagation
The concept of source currents of a radiating source can be employed to express its directivity in some particular cases analytically. For an antenna array, this concept can be extended to the concept of a generalised directivity based on self‐ and mutual radiation intensities, self‐ and mutual radiated powers and excitation currents of array elements. These approaches were applied to examples of the array of two elementary dipoles and the array of two isotropic radiators. Particularly, the evaluation of the directivity of the end‐fire arrays, which are of special attention due to superdirective properties, was treated. Novel closed‐form expressions for the directivity of these arrays with out‐of‐phase excitation were derived. It was observed that the end‐fire directivity can be further enhanced by optimising the excitation currents of the arrays. Their optimal phase difference and corresponding increased directivity were also found analytically. The results were validated by a full‐wave simulator.