Wireless power transmission (WPT) is an emerging technology that is gaining increased visibility in recent years. Efficient WPT circuits, systems and strategies can address a large group of applications spanning from batteryless systems, battery-free sensors, passive RF identification, near-field communications, and many others. WPT is a fundamental enabling technology of the Internet of Things concept, as well as machine-to-machine communications, since it minimizes the use of batteries and eliminates wired power connections. WPT technology brings together RF and dc circuit and system designers with different backgrounds on circuit design, novel materials and applications, and regulatory issues, forming a cross disciplinary team in order to achieve an efficient transmission of power over the air interface. This paper aims to present WPT technology in an integrated way, addressing state-of-the-art and challenges, and to discuss future R&D perspectives summarizing recent activities in Europe.
10 October 2017 in IEEE Antennas and Wireless Propagation Letters
This letter presents the novel 20 bit chipless radiofrequency identification transponder (tag) based on spiral capacitively loaded dipole scatterers of electrical size ka = 0.47, radar cross-section (RCS) σ = -29.3 dBsm, and bandwidth BW3dB = 20.9 MHz. It outperforms U-folded dipole scatterer (ka = 0.79, σ = -34.3 dBsm, BW3dB = 18.1 MHz) in the first two parameters in exchange for a slight increase in bandwidth. The total tag size (17 × 68 mm2) is roughly half the size of a credit card. The frequency and amplitude stability of its RCS response, when the zero bit information is coded via removal of individual scatterers, is improved by reordering scatterers in the array. The simulated results were verified by the monostatic measurement of tag RCS.
21 January 2016 in IEEE Antennas and Wireless Propagation Letters
The objective of this letter was to design a compact, battery-less system for an implantable semi-active UHF radio frequency identification (RFID) tag with inductive wireless power transfer for the human body. An RFID chip of the tag, combining powering from a reader by communication and from another source through inductive wireless power transfer, was used. Tag sensitivity for communication was increased by about 21 dB with the help of wireless inductive powering when compared to tags that did not employ this system. Communication and powering circuits were integrated within compact structures on the sides of the reader and the tag. The structure for communication and powering on the side of the reader consists of a center-excised Archimedes spiral antenna and a circular loop, respectively. Similarly, the structure on the side of the tag consists of a folded dipole antenna for communication and a rectangular loop for powering.
12 June 2019 in IEEE Transactions on Microwave Theory and Techniques
In this paper, we propose a novel frequency-domain reading method for the chipless radio frequency identification (RFID) tags. It is based on a single scalar measurement of transmission coefficient magnitude between two antennas by the presence of a tag. The method enables to reliably read the chipless RFID tags based on a dipole resonator array, which is backed by a limited ground plane, in a real environment outside the anechoic chamber. Moreover, it suits simple, yet not necessarily well impedance matched, reader antennas represented by an open end of the rectangular waveguide. The method was verified experimentally in the frequency band of 7-11 GHz.
21 June 2019 in IET Microwaves, Antennas & Propagation
The concept of source currents of a radiating source can be employed to express its directivity in some particular cases analytically. For an antenna array, this concept can be extended to the concept of a generalised directivity based on self‐ and mutual radiation intensities, self‐ and mutual radiated powers and excitation currents of array elements. These approaches were applied to examples of the array of two elementary dipoles and the array of two isotropic radiators. Particularly, the evaluation of the directivity of the end‐fire arrays, which are of special attention due to superdirective properties, was treated. Novel closed‐form expressions for the directivity of these arrays with out‐of‐phase excitation were derived. It was observed that the end‐fire directivity can be further enhanced by optimising the excitation currents of the arrays. Their optimal phase difference and corresponding increased directivity were also found analytically. The results were validated by a full‐wave simulator.