Coal combustion residues are produced in large volumes and have been dumped as waste products over many years. The use of bottom ash (BA) as a partial replacement for Portland cement (PC) is an economical use of this thermal power plant by-product. The study reported here aimed to characterise BA of different sizes for use as 10–40% PC replacement. Chemical and physical characteristics such as chemical composition, phase analysis, microstructure, density and compressive strength were examined. With 10% 63 μm BA, the density slightly decreased while the strength was almost identical to that of the control PC mix. Scanning electron microscopy images revealed the flat and hexagonal shapes of calcium silicate hydrate gel. Calcium carbonate enhanced the hydration process of C3S while the ternary phase diagram of calcium oxide–silicon dioxide–aluminium oxide showed that a mix with 10% BA was in the high-calcium zone.
27 June 2017 in IOP Conference Series: Materials Science and Engineering
Incineration solid waste bottom ash was use to examine the suitability as a substitution in cement production. This study enveloped an innovative technology option for designing new equivalent cement that contains incineration solid waste bottom ash. The compressive strength of the samples was determined at 7, 14, 28 and 90 days. The result was compared to control cement with cement mixture containing incineration waste bottom ash where the result proved that bottom ash cement mixture able achieve its equivalent performance compared to control cement which meeting the requirement of the standards according to EN 196-1. The pozzolanic activity index of bottom ash cement mixture reached 0.92 at 28 days and 0.95 at 90 and this values can be concluded as a pozzolanic material with positive pozzolanic activity. Calcium hydroxide in Portland cement decreasing with the increasing replacement of bottom ash where the reaction occur between Ca(OH) 2 and active SiO 2 .
Product of incineration municipal solid waste bottom ash was substitute to Portland cement in construction industry. This study investigated the changes of bottom ash in Portland cement by chemical and mineralogical testing. Various substitution of bottom ash (10%, 20%, 30%, and 40%) to Portland cement was investigated. The main purpose was to clarify the mechanisms behind the formation of the cement mortar with bottom ash particles. The result indicated that the chemical and mineralogical of the cement mortar incorporating bottom ash was not significantly changed with the substitution of 10-40% bottom ash. However, the use of bottom ash minimizes the main composition of cement mortar. Overall, it was found that there is significant potential to increase the utilization of bottom ash.