Barbara Gronostajska

Prof. Dr. Barbara Gronostajska

Faculty of Architecture, Wroclaw University of Science and Technology, 50-370 Wrocław, Poland

Research Focus & Metrics

Academic Career Length

11Years (2016-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
28 December 2024 in Materials
Verified
Journal Article
Open access
PDF file
SMShriram Marathe
Shriram Marathe
MNMartyna Nieświec
Martyna Nieświec
Barbara GronostajskaBarbara Gronostajska
Barbara Gronostajska
This research presents a proposal for alkali-activated permeable concrete composites with the use of industrial by-products, including ground granulated blast-furnace slag (GGBS) and waste-foundry sand, as well as agro-desecrate product, i.e., sugarcane bagasse ash (SBA). GGBS and SBA served as binders, with crushed granite as coarse aggregate and waste-foundry sand as fine aggregate. The novelty of this proposal is in examining the influence of SBA, in combination with slag, on the fresh- and hardened-state properties of the proposed permeable concretes. Experiments were conducted to optimize the SBA percentage based on hydraulic conductivity and compressive and tensile strength after 28 days of air curing. The hardened density, compaction factor (workability), and saturated water absorption were also measured for all the mixes. Furthermore, the control and optimal mixes were subjected to evaluate the microstructure analysis (EDX, XRD, and FESEM) after 28 days of air curing. The mix containing 100% GGBS and 0% SBA served as the reference, with the optimal 10% SBA mix (with 90% GGBS) used for comparative analysis to understand its effect on the properties of permeable composites. The results showed positive or acceptable mechanical performance at a mix ratio of 10% SBA to 90% GGBS as binders. This study aims to enhance the understanding of the engineering behavior of alkali-activated permeable composites, facilitating the rational design of permeable pavement systems through the effective use of agro-industrial waste products, thereby conserving ecosystems while meeting engineering requirements.

16 December 2021 in Buildings
Verified
Journal Article
Open access
PDF file
Barbara GronostajskaBarbara Gronostajska
Barbara Gronostajska
ASAnna Szczegielniak
Anna Szczegielniak
The purpose of this study wass to assess the interior design solutions of residential microflats built in large European cities in countries from the Organisation for Economic Co-operation and Development (OECD). A sample consisting of thirty representative microflats with a floor area below 35 m2 was selected for the study. The flats were intended for either permanent or temporary occupancy and were built over the past fifteen years. The research field covered several large European cities, where demand for such units is high. Comparative analyses of different microflat interior design models were performed. The objective of the study was to determine which contemporary microflat interior design solutions (such as space layout, furniture layout, and design, color, and material design) are optimal and the most commonly used. Sets of design solutions applied in microflats were collected and documented. The study used a range of research methods, including a review of the literature, websites, field research, and comparative analysis. The set of presented interior design solutions and the conclusions drawn from the analyses can be useful to architects and interior designers who design microflats and residential units with greater floor areas, or flats where effective use of floor area is crucial (e.g., student housing). It is also worth mentioning that the existing literature on microflats focuses primarily on the United States and Australia and not Europe, and discusses the economics and ecology of inhabiting microflats.

23 August 2024 in Buildings
Verified
Journal Article
Open access
PDF file
Barbara GronostajskaBarbara Gronostajska
Barbara Gronostajska
ABAnna Maria Berbesz-Wyrodek
Anna Maria Berbesz-Wyrodek
According to statistical forecasts, one in six people on the planet will be 60 years of age or older by 2030. By 2050, the number of people in this age group is predicted to double to 2.1 billion. Furthermore, it is projected that the number of people 80 years of age and older would treble between 2020 and 2050, reaching 426 million. For architects, this demographic transition poses a serious problem, especially when it comes to creating ergonomic living environments that adhere to universal design principles. With a focus on prefabricated large-panels technology built in Poland between 1960 and 1989, this study examines and presents effective design ideas for senior residential complexes and contrasts them with Polish and European approaches. The study addresses the unique needs of senior citizens, taking into account both physical and cognitive limitations, and provides a thorough analysis of statistical data to highlight the difficulties in designing for seniors. The article showcases creative design solutions made for people with cognitive impairments including Alzheimer’s disease and dementia. One of the key studies undertaken in the article was the analysis of the existing Popowice Północne housing estate in Wrocław, constructed using large-panel technology. Additionally, it sets out the fundamentals for developing age-friendly cities and provides thorough guidelines for a comprehensive approach to constructing living areas that are age-friendly. The article utilizes literature and statistical data analysis, case study research, and a comparative method. To summarize the analyses and research, a SWOT analysis was conducted on the accessibility of large-panel buildings for the older people.

23 June 2025 in Materials
Verified
Journal Article
Open access
PDF file
PWPaweł Widomski
Paweł Widomski
PMPrzemysław Maksymowicz
Przemysław Maksymowicz
OTOliwia Trzaska
Oliwia Trzaska
Paulina Mayer-TrzaskowskaPaulina Mayer-Trzaskowska
Paulina Mayer-Trzaskowska
Paweł KaczyńskiPaweł Kaczyński
Paweł Kaczyński
MKMichał Kogut
Michał Kogut
This study investigates the effects of destructive climatic factors on the mechanical and performance properties of various structural materials, encompassing both polymers and metals. Over recent decades, the growing adoption of synthetic polymers has revolutionized engineering applications, yet their susceptibility to environmental degradation poses significant challenges. This research emphasizes the need for comprehensive testing under both operational and environmental stressors, including extreme temperatures, UV radiation, and moisture, to assess material durability and performance. Mechanical tests were conducted at ambient (25 °C) and low temperatures (−50 °C) to evaluate the strength and strain responses of selected materials. Additionally, a 12-month accelerated aging process using UV radiation and elevated temperatures was performed to simulate long-term environmental exposure. Parameters such as Shore D hardness, gloss, and mass were measured at regular intervals to quantify material degradation. The results revealed significant differences in performance across material types. Among polymers, laser-extruded and milky plexiglass, as well as solid polycarbonate, exhibited satisfactory resistance to aging, with minimal changes in mechanical properties. However, high-impact polystyrene displayed substantial deformation and hardness loss after prolonged UV exposure. For metals, aluminum and stainless steel (304 and 316) demonstrated exceptional durability, retaining structural and aesthetic properties after 12 months of accelerated aging, whereas galvanized steel exhibited pronounced corrosion. The study highlights the critical interplay between mechanical loading and environmental factors, stressing the importance of material selection tailored to specific climatic conditions. It further underscores the value of integrating experimental findings with predictive models, such as finite element analysis, to enhance the design and longevity of engineering materials. The findings provide actionable insights for industries operating in temperate climates, where materials are subjected to diverse and cyclic environmental stressors. Recommendations are offered for selecting resilient materials suitable for protective housings and structural components.

14 June 2024 in Medycyna Pracy
Verified
Journal Article
Open access
PNPrzemyslaw Nowakowski
Przemyslaw Nowakowski
Barbara GronostajskaBarbara Gronostajska
Barbara Gronostajska
Background: Building law regulations determine designing the built environment recognising the needs of users of different ages and psychophysical abilities. Seniors and their spatial needs are covered there to a limited extent. The benchmark for design are wheelchair users. Their spatial...

21 June 2016
Verified
Book Chapter
Closed access
PDF file
Barbara GronostajskaBarbara Gronostajska
Barbara Gronostajska
AWAndrzej M. Wielgus
Andrzej M. Wielgus