Guo-Dung Su

Prof. Guo-Dung Su

Graduate Institute of Photonics and Optoelectronics, National Taiwan University, Taipei 10617, Taiwan
orcid

Research Focus & Metrics

Academic Career Length

29Years (1998-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
24 September 2020 in Scientific Reports
Verified
Journal Article
Open access
PDF file
FCFan Chun-Yuan
Fan Chun-Yuan
CLChia-Ping Lin
Chia-Ping Lin
Guo-Dung SuGuo-Dung Su
Guo-Dung Su
Wide-angle optical systems play a vital role in imaging applications and have been researched for many years. In traditional lenses, attaining a wide field of view (FOV) by using a single optical component is difficult because these lenses have crucial aberrations. In this study, we developed a wide-angle metalens with a numerical aperture of 0.25 that provided a diffraction-limited FOV of over 170° for a wavelength of 532 nm without the need for image stitching or multiple lenses. The designed wide-angle metalens is free of aberration and polarization, and its full width of half maximum is close to the diffraction limit at all angles. Moreover, the metalens which is designed through a hexagonal arrangement exhibits higher focusing efficiency at all angles than most-seen square arrangement. The focusing efficiencies are as high as 82% at a normal incident and 45% at an incident of 85°. Compared with traditional optical components, the proposed metalens exhibits higher FOV and provides a more satisfactory image quality because of aberration correction. Because of the advantages of the proposed metalens, which are difficult to achieve for a traditional single lens, it has the potential to be applied in camera systems and virtual and augmented reality.

1 June 2001 in IEEE Photonics Technology Letters
Verified
Journal Article
Closed access
Guo-Dung SuGuo-Dung Su
Guo-Dung Su
HTH. Toshiyoshi
H. Toshiyoshi
MWM.C. Wu
M.C. Wu
We have developed a novel batch-fabrication single-crystalline silicon micromirror bonding process to fabricate optically flat micromirrors on polysilicon surface-micromachined two-dimensional (2-D) scanners. The electrostatically actuated 2-D scanner has a mirror area of 460 μm×460 μm and an optical scan angle of /spl plusmn/7.5/spl deg/. Compared with micromirror made by standard polysilicon surface-micromachining process, the radius of curvature of the micromirror has been improved by 150 times from 1.8 to 265 cm, with surface roughness <10 nm.

8 March 2019 in Optica
Verified
Journal Article
Closed access
PDF file
WLWei-Lun Liang
Wei-Lun Liang
JPJun-Gu Pan
Jun-Gu Pan
Guo-Dung SuGuo-Dung Su
Guo-Dung Su
This work presents the fabrication of a one-lens camera using a biologically inspired artificial compound eye with multiple focal lengths. Traditional camera designs that consist of many separated lenses are difficult to assemble due to tight tolerance. The one-lens camera design is demonstrated experimentally in this work to avoid tolerance buildups. This structure is based on the principles of both the human eye as well as an insect’s compound eye. The artificial compound eye is a curved hexagonal microlens array, like an ommatidial array, wherein each artificial ommatidium collects light with a small angular acceptance. The ommatidia, in a typical hexagonal arrangement of 37 lenses, are arranged across a hemispherical photopolymer dome. The curved hexagonal array helps us to achieve a compact and wide field-of-view camera module. The fabrication process for the curved array is divided into two parts: creation of a planar hexagonal multi-lens array, and a replication process. To create the planar array, we use inkjet printing technology with the hydrophilic confinement effect to establish microlens shapes with different profiles. Next, the replication process converts the planar array into a curved shape. The spherical configuration of the hexagonal array is accomplished by applying the template architecture to a reconfigurable surface shape, that is, a photopolymer duplication using a deformed elastomer membrane with the hexagonal array pattern. In our experimental demonstration, microlenses in four rings with different focal lengths are fabricated on a single hemispherical lens with radius of curvature of 2.4 mm. The thickness of our proposed system is 3.04 mm, the f-number is 1.68, and the diagonal field of view is 92.6 deg. Above all, our presented camera module system uses a single one-piece lens.

9 December 2013 in Journal of Micromechanics and Microengineering
Verified
Journal Article
Open access
PDF file
YCYi-Shiuan Cherng
Yi-Shiuan Cherng
Guo-Dung SuGuo-Dung Su
Guo-Dung Su
In comparison to traditional planar optical devices, compound-eye structured optical elements can reduce the number of components and their volume when being applied to wide-field imaging and sensing systems. However, the fabrication process for microstructures on a curvilinear surface has many difficulties since traditional fabrication techniques are planar. In this paper, we present a cost-effective method to fabricate microlenses on a spherical surface. Microlenses, of which the fill factor was about 78%, were formed using the thermal reflow technique, followed by multiple replication processes to transfer the microlenses from the planar substrate onto a spherical surface. We produced a curved mold with concave microlenses, and it allowed this method to be replicable. A polydimethylsiloxane elastomer was employed as the material for both the microlenses and the mold. The radius of curvature of the spherical surface was approximately 6.1 mm. The variation of the microlenses was analyzed, demonstrating high uniformity. The imaging performance of the microlenses is also presented. The curved microlens arrays were combined with image sensors, and sub-images of objects at various distances are shown. The experimental results demonstrate a high potential for curved microlens arrays being applied to compact mobile camera lenses.

26 April 2013 in Journal of Micromechanics and Microengineering
Verified
Journal Article
Closed access
WCWei-Chih Chen
Wei-Chih Chen
TWTsung-Ju Wu
Tsung-Ju Wu
WWWen-Jong Wu
Wen-Jong Wu
Guo-Dung SuGuo-Dung Su
Guo-Dung Su

31 July 2011 in Micro & Nano Letters
Verified
Journal Article
Closed access
VLV. Lin
V. Lin
HWH.-C. Wei
H.-C. Wei
HHH.-T. Hsieh
H.-T. Hsieh
JHJ.-L. Hsieh
J.-L. Hsieh
Guo-Dung SuGuo-Dung Su
Guo-Dung Su
Presented is a microlens array (MLA) with long focal length (millimetre range) in various structures and arrangements using thermal reflow process for Shack–Hartmann wavefront sensors (SHWSs). The microlens focal length is usually of the same order of the lens diameter or several 100 µm. To extend the focal length, the authors made a photoresist MLA covered by polydimethysiloxane (PDMS) film on a glass substrate. Since the refractive index difference between the PDMS and MLA interface is lower than that of air and the MLA interface, the light is less bended when passing through it and focuses in a far distance. The exerimental result shows a 235 and 135 µm diameter MLA with 5.27 and 1.81 mm focal lengths, which is around six times longer than the conventional thermal reflow method. Other specific focal lengths could be realised by modifying the refractive index difference. After the long-focal-length MLA film was fabricated, it could be integrated with an image sensor to build a SHWS. The authors evaluated the performance of their sensor by measuring a progressive addition lens wavefront aberration.