Giuseppe Zullo

Mr. Giuseppe Zullo

University of Padua - Department of Industrial Engineering
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
6 July 2023 in Sensors
Verified
Journal Article
Open access
PDF file
ARAlex Rizzato
Alex Rizzato
MBMatteo Bozzato
Matteo Bozzato
GZGiuseppe Zullo
Giuseppe Zullo
Antonio PaoliAntonio Paoli
Antonio Paoli
Giuseppe MarcolinGiuseppe Marcolin
Giuseppe Marcolin
The translation of the base of support represents a promising approach for the objective assessment of dynamic balance control. Therefore, this study aimed to present a servo-controlled, electrically driven movable plate and a new set of parameters based on the center-of-pressure (CoP) trajectory. Twenty subjects were assessed on a force platform screwed over a movable plate that could combine the following settings: direction (forward (FW) and backward (BW)), displacement (25 mm, 50 mm, and 100 mm), and ramp rate (100 mm/s and 200 mm/s). The subjects underwent two sets of 12 trials randomly combining the plate settings. From the CoP trajectory of the 2.5 s time window after the perturbation, the 95% confidence-interval ellipse (Area95) and the CoP mean velocity (Unit Path) were calculated. Within the same time window, the first peak (FP), the maximal oscillations (ΔCoPMax), and the standard deviation (PPV) of the CoP anterior–posterior trajectory were calculated. The plate direction (p < 0.01), ramp rate (p < 0.001), and displacement (p < 0.01) affected the Area95, FP, and ΔCoPMax, while the Unit Path and PPV were influenced only by the ramp rate (p < 0.001) and displacement (p < 0.001). The servo-controlled, electrically driven movable plate and the CoP-related parameters presented in this study represent a new promising objective tool for dynamic balance assessment.

11 January 2023 in Sensors
Verified
Journal Article
Open access
PDF file
GZGiuseppe Zullo
Giuseppe Zullo
PCPierluigi Cibin
Pierluigi Cibin
LBLorenzo Bortolan
Lorenzo Bortolan
MBMichele Botteon
Michele Botteon
NPNicola Petrone
Nicola Petrone
Skiing is a popular winter activity spanning various subdisciplines. Key hardware are ski boots, bindings, and skis, which are designed to withstand loads generated during skiing. Obtaining service forces and moments has always been challenging to researchers in the past. The goal of the present study is to develop and test a lightweight and compact measurement system to obtain the Ground Reaction Forces and the kinematics for ski touring and alpine ski. To do so, we adapted two six-axis load cells to fit into ski touring and alpine skis adding 20 mm height and 500 g weight to the original ski. To measure kinematics, we created custom angular sensors from rotary potentiometers. The system was tested indoors using a force platform and motion capture system before a first set of field tests in which the sensors were used to measure ski touring and alpine skis kinetics and kinematics. Validation trials showed maximum errors of 10% for kinetics and 5% for kinematics. Field tests showed data in agreement with previous findings on the topic. The results of this study show the possibility of using our system to study biomechanics and equipment performances for ski touring, alpine skiing, and possibly other disciplines.

8 May 2023 in Sports Engineering
Verified
Journal Article
Open access
PDF file
GZGiuseppe Zullo
Giuseppe Zullo
PCPierluigi Cibin
Pierluigi Cibin
NPNicola Petrone
Nicola Petrone
Ski touring is an established winter activity that has experienced a recent increase in popularity. Differently to alpine skiing, skier gains altitude without lifts, thus equipment weight must be minimized. Nevertheless, structural properties of the equipment, such as ski boots, must be adequate to withstand skiing loads. Several studies provided data on flexural stiffness of alpine ski boots in bench and field tests. The present study focused on the torsional properties of ski-touring boots. Indeed, touring bindings design implies a higher torque transmission to the front piece which induces a torsional load throughout the shell. To conduct the study, we prepared a ski-touring boot with strain gage bridges, and we performed bench tests to determine the stiffness of the boot and the bridge sensitivity. We also positioned and calibrated strain gage bridges to measure bending load in the shell and axial load in the ski/walk lever placed between shell and cuff of the boot. Then, we conducted a field test measuring the loads during a ski-touring trip including ascent and descent. Bench tests evidenced linearity of the torsion sensor, and a variation of stiffness depending on dummy leg absence/presence and boot buckle setting. Field tests showed torque ranges of 17 Nm in climbing and of 27 Nm in skiing. Bending moment range on the boot shell was of 150 and 228 Nm, respectively. Maximum force on the ski/walk mechanism reached 570 N. Results could be useful to test ski-touring boot performances and to optimize their design.

12 April 2021 in Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology
Verified
Journal Article
Closed access
PDF file
GZGiuseppe Zullo
Giuseppe Zullo
GMGiuseppe Marcolin
Giuseppe Marcolin
PMPaolo Mistretta
Paolo Mistretta
NPNicola Petrone
Nicola Petrone
In outdoor footwear, sole properties must guarantee grip with the ground and support the forefoot without altering the kinematics of the metatarsophalangeal joints (MPJ). The present study aimed to implement an objective measure of shoe bending stiffness and investigate the effect of shoes with different bending stiffness on MPJ kinematics, kinetics, and energy balance during walking. The bending stiffness of four shoes was calculated using a customized flexometer. Then, the influence of each footwear on MPJ biomechanics during level and uphill walking was investigated with a motion capture system and a force plate on 10 healthy subjects. Results showed that MPJ peak dorsiflexion angle, stiffness, and energy balance were affected both by shoe bending stiffness (p<0.001) and walking slope (p<0.001). The findings of the study, which quantify the influence of shoe stiffness on MPJ biomechanics, will be helpful in the design of outdoor footwear.

17 May 2021 in Sensors
Verified
Journal Article
Open access
PDF file
GZGiuseppe Zullo
Giuseppe Zullo
ASAnna Leidy Silvestroni
Anna Leidy Silvestroni
GCGianluca Candiotto
Gianluca Candiotto
AKAndrey Koptyug
Andrey Koptyug
NPNicola Petrone
Nicola Petrone
This paper presents the concept, design, construction, and validation of a novel probe based on the hexadic disposition of six pressure sensors suitable for measuring triaxial stress states inside bulky soft materials. The measurement of triaxial stress states inside bulk materials such as brain tissue surrogates is a challenging task needed to investigate internal organs’ stress states and validate FE models. The purpose of the work was the development and validation of a 17 × 17 × 17 mm probe containing six pressure sensors. To do so, six piezoresistive pressure sensors of 6 mm diameter were arranged into an hexad at three cartesian axes and bisecting angles, based on the analytical solution of the stress tensor. The resulting probe was embedded in a soft silicone rubber of known characteristics, calibrated under cyclic compression and shear in three orientations, and statically validated with combined loads. A calibration matrix was computed, and validation tests allowed us to estimate Von Mises stress under combined stress with an error below 6%. Hence, the proposed probe design and method can give indications about the complex stress state developing internally to soft materials under triaxial high-strain fields, opening applications in the analysis of biological models or physical surrogates involving parenchyma organs.

9 August 2025 in Sensors
Verified
Journal Article
Open access
PDF file
GZGiuseppe Zullo
Giuseppe Zullo
Elisa BaldoinElisa Baldoin
Elisa Baldoin
LMLeonardo Marin
Leonardo Marin
AKAndrey Koptyug
Andrey Koptyug
NPNicola Petrone
Nicola Petrone
Road accidents could result in severe or fatal neck injuries. A few surrogate necks are available to develop and test neck protectors as countermeasures, but each has its own limitations. The objective of this study was to develop a surrogate neck compatible with the Hybrid III dummy, focused on tunable flexural stiffness and integrated angular sensors for kinematic feedback during impact tests. The neck features six 3D-printed surrogate vertebral bodies interconnected by rubber surrogate discs, providing a baseline flexibility to the surrogate fundamental spinal units. An adjustable inner cable and elastic elements hooked on the sides of vertebral elements allow to increase the flexural stiffness of the surrogate and to simulate the asymmetric behavior of the human neck. Neck flexural angles and axial compression are measured using a novel system made of wires, pulleys, and rotary potentiometers embedded in the neck base. A motion capture system and a load cell were used to determine the bending and torsional stiffness of the neck and to calibrate the sensors. Results showed that the neck flexural stiffness can be tuned between 3.29 and 5.76 Nm/rad. Torsional stiffness was 1.01 Nm/rad and compression stiffness can be tuned from 39 to 193 N/mm. Sensor flexural angles were compared with motion capture angles, showing an RMSE error of 1.35° during static testing and of 3° during dynamic testing. The developed neck could be a viable tool for investigating neck braces from a kinematic and kinetic perspective due to its inbuilt sensing ability and its tunable stiffness.