Failure in industrial processes is often related to wear and can cause significant problems. It is estimated that approximately 1–4% of the gross national product for an industrialized nation is related to abrasive wear. This work aims to numerically predict development of wear for full-scale mining applications in harsh sub-arctic conditions. The purpose is to increase the understanding of wear development in industrial processes and optimize service life and minimize costs related to wear. In the present paper, a granular material model consisting of the discrete element method (DEM) and rigid finite element particles is utilized to study wear in full-scale mining applications where granular materials and steel structures are present. A wear model with the basis in Finnie’s wear model is developed to calculate wear from combined abrasive sliding and impact wear. Novel in situ full-scale experiments are presented for calibration of the wear model. A simulation model of the rope shovel loading process is set up where the bucket filling process is simulated several times, and the wear is calculated with the calibrated wear model. From the full-scale validation, it is shown that the simulated wear is in excellent agreement when compared to the experiments, both regarding wear locations and magnitudes. After validation, the model is utilized to study if wear can be minimized by making small changes to the bucket. One major conclusion from the work is that the presented wear simulator is a suitable tool that can be used for product development and optimization of the loading process.
30 October 2020 in Computational Particle Mechanics
Rope shovels and other heavy mining equipment used for loading fragmented rocks to extract minerals from the earth are used in almost every open pit mine. The optimization of the loading process is of enormous value due to the extremely large amount of material turn over. In this work, a full-scale numerical model of the loading process is developed. Granular material of copper ore is modeled in a combination of rigid finite elements for larger particles with complex shapes, and the discrete element method for smaller particles. A multi rigid body dynamic model, discretized with finite elements are used to model the rope shovel. Calibration of the numerical model for the granular material is performed via a new and unique experimental full-scale approach of analyzing waste rock pile angles with a height of approximately 15 m. In situ experimental data acquisition is performed during the loading process for validation of the model. After model validation, the influence of several loading variables such as bucket rake angle, velocity, and position from the pile are investigated and evaluated. When comparing the numerical model results with experimental mass measurement an excellent agreement was observed. Also, drone camera video recordings of the mass flow behavior and the numerical mass flow behavior are in agreement. Small adjustments of dig variables show a significant effect on the average dig force as well as the bucket fill factor.