The exploration of high-efficiency bifunctional electrocatalysts for hydrogen evolution reaction (HER) and oxygen evolution reaction (OER) has long been challenging. The rational design of a catalyst by constructing heterostructures and a doping element are possibly expected to achieve it. Herein, the utilization of flower-like Fe/C-doped-MoS2/Ni3S2-450 spherical structural materials for electrocatalytic HER and OER is introduced in this study. The carboxyferrocene-incorporated molybdenum sulfide/nickel sulfide (MoySx/NiS) nanostructures were prepared by solvothermal method. After annealing, the iron and carbon elements derived from ferrocenecarboxylic acid enhanced the electrical transport performance and provided rich electronic sites for HER and OER in alkaline media. Specifically, the optimized flower-like Fe/C-doped-MoS2/Ni3S2-450 exhibited efficient bifunctional performance in alkaline electrolyte, with low overpotentials of 188 and 270 mV required to deliver a current density of 10 mA cm−2 for HER and OER, respectively. This work provides valuable insights for the rational design of energy storage and conversion materials by the incorporation of transition metal and carbon elements into metal sulfide structures utilizing metallocene.
Hexagonal boron nitride nanosheets (h-BNNs) show great potential in the field of tribology due to their typical two-dimensional layered structure and are essential for replacing conventional sulfur/phosphate-containing additives. However, the large particle size and poor dispersion of h-BNs seriously restrict their green lubrication application. In this paper, MnO2@h-BNNs nanocomposites were successfully prepared by ultrasonically exfoliating a hydrothermal method. The tribological properties of MnO2@h-BNNs nanocomposites as lubricant additives in poly-alpha-olefin oil (PAO) were investigated. The results show the oil dispersed with 0.25 wt% MnO2@h-BNNs had the best friction reduction and antiwear effect with 42% and 11.2% reduction, respectively, compared with the plain oil. Through further wear surface analyzing, we verified the antiwear mechanism of additives in filling the micropits and grooves on the wear surface and forming a friction protection film including Fe2O3, MnO2, and BN on the wear surface, avoiding direct contact between the friction subsets. This can provide ideas for other lubricating oil additives.
Inorganic fullerene-like tungsten disulfide particles have been proved to have good anti-friction and anti-wear properties as lubricating materials. As far as we know, however, when it is used as a lubricant additive, its behavior and action mechanism in the friction process are rarely studied. Herein, IF–WS2 particles were synthesized by a Chemical Vapor Deposition (CVD) method. The effect of IF–WS2 particle concentrations in the PAO6 oil on the tribological behaviors was investigated with a four-ball wear machine at both 75 and 100 °C. Additionally, the analyzed morphology and composition of nanomaterials and worn surfaces were analyzed by Scanning electron microscopy (SEM), Transmission Electron Microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The friction behavior in actual working conditions was studied by a wear testing machine. The experimental results show that compared with the original PAO6 oil, at a dispersion of 0.25 wt% in PAO6 oil, the IF–WS2 particles showed the best performance in terms of coefficient of friction, wear scar diameter and wear mass, which significantly reduced by 27%, 43% and 87%, respectively. At the same time, in the process of friction, it was found that IF–WS2 particles accumulated in the depressions to fill the scratches, and adsorption films and chemical films, including FeS2, WS2 and WO3, were formed on the worn surfaces to avoid the direct contact among the friction pairs more effectively, resulting in the improved anti-wear performances. Additionally, the addition of IF–WS2 particles effectively delayed the rise of lubricating oil temperature. In addition, dispersant span 80 can effectively improve the dispersion and stability of IF–WS2 in PAO6. This work provides us for understanding the effective lubrication mechanism of IF–WS2 particles in more detail and having a new acknowledge of the comprehensive performance of IF–WS2/PAO6 oil.