Flat plate solar collectors can easily be termed as the most vastly studied alternative energy transforming and generating technology of the twenty-first century. As the world is racing towards the fourth industrial revolution (Industry 4.0), more and more energy is being consumed for mega projects to be materialized. Electronic devices are not only confined to conventional intermittent and costlier electric energy, but also fuel. Solar energy is now being shared to work smart devices, transform electric energy, and operate automobiles, aeronautics, water heating, and space heating. Traditional flat plate solar collectors can only occupy 50–60% of their thermal efficiency, resulting in less heat generation and a low thermal performance because of using a common absorber made of copper tubing compared to a high conductive metal sheet (copper or aluminum). To ameliorate the thermal efficiency of the solar collector, it is imperative to find a superior alternative heat exchanger that will result in improved thermal performance of the solar collector. In this study, light has been shed in terms of substituting conventional heat absorbers with crystal nano-cellulose (CNC) and a graphene hybrid. An empirical comparison has been drawn by comparing the familiar 0.3% base fluid, 0.5% graphene, and CNC separately, as well as 0.3%, 0.5% CNC, and graphene hybrids at different temperatures. Remarkably, this work has proven that a CNC and graphene hybrid fluid with a volumetric fraction of 0.5% concentration and at a high temperature of 80 °C, gave astounding results for improved thermal conductivity, viscosity, and other parameters. CNC and graphene hybrid nanofluid can be a superior substitute for a conventional base fluid, resulting in prolific thermal performance.
20 November 2023 in Numerical Heat Transfer, Part A: Applications
Microalgae is considered as an excellent potential renewable source of fuel in many forms including powder or slurry. A high percentage of emulsified water in the fuel is reported to reduce diesel engines’ emissions such as NOx, but that will compromise the engine output power. Using microalgae powder as an additive to enhance the emulsified water fuel heating value is the main objective of this work. Diesel engine combustion, vibration, performance and emissions were evaluated for pure cottonseed biodiesel (CS-B100), emulsified water 20% (vol.) in cottonseed biodiesel (CSB-E20) and emulsified water 20% (vol.) containing Fresh Water Microalgae Chlorella Vulgaris (FWM-CV) in cottonseed biodiesel (CSB-ME20). The emulsified water fuels showed a reduction in in-cylinder pressure, vibration, brake power, torque, exhaust gas temperature, CO2 and NOx, while BSFC and O2 were higher than the pure biodiesel (CS-B100). CSB-ME20 produced higher power and torque than CSB-E20 due to the presence of microalgae in the fuel that increased the energy content of the fuel.
Cavitation in centrifugal pumps poses significant operational challenges, leading to performance degradation, material damage, and increased noise and vibration. This study presents the development and validation of a cost-effective, vibration-based cavitation detection system utilizing low-cost pressure transducers and Micro-Electro-Mechanical Systems (MEMS)-based accelerometers, integrated with machine learning algorithms. The system effectively classifies cavitation into four distinct stages: Normal (N), Incipient (I), Partial (II), and Full Cavitation (C). Experimental validation, conducted under both steady-state and dynamic conditions, confirmed the system's robustness in identifying cavitation events, even amidst rapid changes in hydraulic conditions. A key innovation lies in the successful application of general-purpose pressure sensors for detecting hydraulic features pertinent to cavitation without requiring pump hardware modifications. MEMS accelerometers demonstrated reliable performance over extended trials, proving their suitability for embedded monitoring systems. The integration of both pressure and accelerometer signals, particularly from both inlet and outlet, yielded a 100% classification accuracy. Even with limited sensor configurations, such as accelerometers alone, impressive performance levels were achieved, with classification errors confined to adjacent cavitation classes and typically lasting only 0.5 seconds during dynamic trials. These findings underscore the potential for applying filtering techniques to mitigate transient misclassifications in operational settings. While visual inspection via high-speed camera was not employed, the system's outputs consistently aligned with known hydraulic transitions. This research demonstrates the feasibility and a promise of a cost-effective, sensor-based cavitation monitoring system for enhancing predictive maintenance strategies in various industrial sectors.