Traffic law violation has been recognized as a major cause for road accidents in most parts of the world with majority occurring in developing countries. Even with the presence of rules and regulations stipulated against this, violators are still on the increase. This is due to the fact that the rules are not properly enforced by appropriate authorities in those parts of the world. Therefore, a system needs to be designed to assist law enforcement agencies to impose these rules to improve road safety and reduce road accidents. This work uses a Vehicle Plate Number Recognition (VNPR) system which is a real-time embedded system to automatically recognize license plate numbers. It provides an alternative means to VPNR using an open-source library known as openCV. The main aim of the system is to use image processing to identify vehicles violating traffic by their plate numbers. It consists of an IR sensor for detecting the vehicle. During testing, a minimum time was set for the sensor to detect the object which was recorded by the microprocessor. Once it was less than the set time, the camera was triggered to capture the plate number and store the image on the Raspberry Pi. The image captured is processed by the Raspberry Pi to extract the numbers on the image. The numbers on the capture imaged were viewed on a web page via an IP address. The system if implemented can be used to improve road safety and control traffic of emerging smart cities. It will also be used to apply appropriate sanctions for traffic law violators.
With the proliferation of non-linear loads in electricity supply industry, interests in improving quality of electrical supply have increased significantly. Power quality challenges have generated disputes between customers, network operators and equipment manufacturers globally. Identification of the sources of harmonics, and the quantification of the identified variables at the points of common coupling (PCC) pose challenges in the electricity supply industry. Critical in the determination of the harmonic contributions are data for harmonic distortions in phase currents and voltages, power factor, apparent power, active power, reactive power, and frequency. The data were obtained at the PCC between 5 different arc furnace steel plant and the transmission network. The data were captured at 33kV and 132kV voltage level at the steel plant PCC using a Circuitor AR6 power analyser connected through incoming voltage transformers (VTs) and current transformers (CTs). Histograms and cumulative probability distribution plots present the harmonic contents of the data. This data can be reused for artificial intelligence and machine learning application in real-time monitoring of state of health at the PCC and design of filter networks to mitigate harmonics.
The availability and reliability of power supply are vital to socioeconomic development. Nigeria is the most populous country in Africa with electrical power generation that is just a fragment of the energy demands of the populace. In this study, we analyzed the trend of power generation and losses in the Nigerian power system. The average peak power generated over the study period is just 4229.39MW which is approximately 23.5MW per million people. This is meagre when compared with about 500MW per million people in South Africa. Therefore, adequate and sustainable effort are required in terms of investment and management at the generation, transmission and distribution levels toward ensuring improved power supply in Nigeria. There is a need to introduce renewable energy sources into the energy mix at the national level in order to reduce environmental pollution, and also to promote the use of sustainable alternative energy sources at the household and industrial level which will stimulate private sector participation through the establishment of commercial energy farms.
28 February 2020 in International Journal of Engineering Research and Technology
Cyber-physical systems (CPS) are highly susceptible to malicious attacks due to their complex dynamics and interconnectivity. A comprehensive understanding of their vulnerabilities is essential for designing effective resilience measures. This article presents a data-driven attack generative system for evaluating the vulnerability of CPS. The proposed approach formulates the vulnerability assessment problem as determining the feasibility of a specific attack set based on two boundary functions that represent the effectiveness and stealthiness of attacks. The attack generative model is trained using a custom loss function, with two universal approximators designed to learn the effectiveness and stealthiness functions simultaneously. Theoretical results for successful generation and asymptotic convergence of the resulting training algorithm are given. The proposed approach is evaluated via numerical simulation of an IEEE 14-bus system and gas pipeline systems, demonstrating its viability in learning how to attack nonlinear CPS and identify potential vulnerabilities.