The productivity during the machining of thin-floor components is limited due to unstable vibrations, which lead to poor surface quality and part rejection at the last stage of the manufacturing process. In this article, a semi-active magnetorheological damper device is designed in order to suppress chatter conditions during the milling operations of thin-floor components. To validate the performance of the magnetorheological (MR) damper device, a 1 degree of freedom experimental setup was designed to mimic the machining of thin-floor components and then, the stability boundaries were computed using the Enhance Multistage Homotopy Perturbation Method (EMHPM) together with a novel cutting force model in which the bull-nose end mill is discretized in disks. It was found that the predicted EMHPM stability lobes of the cantilever beam closely follow experimental data. The end of the paper shows that the usage of the MR damper device modifies the stability boundaries with a productivity increase by a factor of at least 3.
Complex thermo-kinetic interactions during metal additive manufacturing reduce the homogeneity of the microstructure of the produced samples. Understanding the effect of processing parameters over the resulting mechanical properties is essential for adopting and popularizing this technology. The present work is focused on the effect of laser power, scanning speed, and hatch spacing on the relative density, microhardness, and microstructure of 316L stainless steel processed by laser powder bed fusion. Several characterization techniques were used to study the microstructure and mechanical properties: optical, electron microscopies, and spectrometry. A full-factorial design of experiments was employed for relative density and microhardness evaluation. The results derived from the experimental work were subjected to statistical analysis, including the use of analysis of variance (ANOVA) to determine both the main effects and the interaction between the processing parameters, as well as to observe the contribution of each factor on the mechanical properties. The results show that the scanning speed is the most statistically significant parameter influencing densification and microhardness. Ensuring the amount of volumetric energy density (125 J/mm3) used to melt the powder bed is paramount; maximum densification (99.7%) is achieved with high laser power and low scanning speed, while hatch spacing is not statistically significant.
Rubber bushings and mounts are vastly used in automotive applications as support and interface elements. In suspension systems, they are commonly employed to interconnect the damping structure to the chassis. Therein, the viscoelastic nature of the material introduces a desirable filtering effect to reduce mechanical vibrations. When designing a suspension system, available literature often deals with viscoelastic mounts by introducing a linear or nonlinear stiffness behavior. In this context, the present paper aims at representing the rubber material using a proper viscoelastic model with the selection of different in-wheels motors. Thus, the mount dynamic behavior’s influence in a suspension is studied and discussed thoroughly through numerical simulations and sensitivity analyses. Furthermore, guidelines are proposed to orient the designer when selecting these elements.
Polymer matrix composites (PMCs) have garnered importance due to their unique combination of mechanical, thermal, and functional properties. However, their performance depends on overcoming challenges related to dispersion, bonding, and processing. Electrospinning is an advanced technique for producing nanofiber or microfiber PMCs. One of the key challenges in electrospun PMCs is the uniform dispersion of reinforcement materials like nanoparticles within the polymer matrix. A Taguchi orthogonal design () was used to evaluate the effects of needle-to-collector distance, applied voltage, and flow rate on mean fiber diameter and deposition quality. Scanning electron microscopy (SEM) and Fourier-transform infrared spectroscopy (FT-IR) were used to characterize electrospun neat sulfonated poly(ether ether ketone) (sPEEK) and sPEEK/TiO2 fibers, whereas tensile tests were performed on solution-cast membranes prepared from the corresponding formulations. The lowest observed run mean diameter was 204.6695 nm at 8 kV, 1.25 mL h−1, and a needle-to-collector distance of 12 cm; this run was also selected for deposition quality. Neat sPEEK membranes exhibited a mean tensile strength of 35.3 MPa, a mean apparent tensile modulus of 476 MPa, and a mean elongation at fracture of 18%. Among the TiO2-containing formulations, increasing the TiO2 content from 0.04 to 0.10 wt.% was associated with higher mean apparent tensile modulus and tensile strength and lower mean elongation at fracture. The 0.10 wt.% formulation exhibited the highest mean apparent tensile modulus and tensile strength.