The development of digital holography is anticipated for the viewing of 3D images by reconstructing both the amplitude and phase information of the object. Compared to analog holograms written by a laser interference, digital hologram technology has the potential to realize a moving 3D image using a spatial light modulator. However, to ensure a high-resolution 3D image with a large viewing angle, the hologram panel requires a near-wavelength scale pixel pitch with a sufficient large numbers of pixels. In this manuscript, we demonstrate a digital hologram panel based on a chalcogenide phase-change material (PCM) which has a pixel pitch of 1 μm and a panel size of 1.6 × 1.6 cm². A thin film of PCM encapsulated by dielectric layers can be used for the hologram panel by means of excimer laser lithography. By tuning the thicknesses of upper and lower dielectric layers, a color-selective diffraction panel is demonstrated since a thin film resonance caused by dielectric can affect to the absorption and diffraction spectrum of the proposed hologram panel. We also show reflection color of a small active region (1 μm × 4 μm) made by ultra-thin PCM layer can be electrically changed.

Going beyond an improved colour gamut, an asymmetric colour contrast, which depends on the viewing direction, and its ability to readily deliver information could create opportunities for a wide range of applications, such as next-generation optical switches, colour displays, and security features in anti-counterfeiting devices. Here, we propose a simple Fabry–Perot etalon architecture capable of generating viewing-direction-sensitive colour contrasts and encrypting pre-inscribed information upon immersion in particular solvents (optical camouflage). Based on the experimental verification of the theoretical modelling, we have discovered a completely new and exotic optical phenomenon involving a tuneable colour switch for viewing-direction-dependent information delivery, which we define as asymmetric optical camouflage.

A wavelength-selective tunable plasmonic absorber is required for various applications, such as thermal imaging sensors, active biosensors, and switching devices in integrated optics. Using Ge ₂ Sb ₂ Te ₅ (GST), which is a representative phase change material showing a large change in optical characteristics, we propose a tunable plasmonic absorber that consists of a metal nanoslit array patterned on a GST-inserted dielectric layer. Based on systematic optimization, the proposed structure achieved a nearly zero reflectance for both states of the inserted GST film with a very large resonance shift after the phase transition. Moreover, the resonance wavelength of the proposed absorber could be flexibly tuned within a broad near-infrared range by tuning the geometric conditions of the nanoslit array and the thicknesses of the dielectric-GST-dielectric multilayer.

A metasurface is a planar optical device that controls the phase, amplitude, and polarization of light through subwavelength-scale unit elements, called meta-atom. The tunability of plasmonic vortex lens (PVL) which generates surface plasmon polaritons (SPPs) carrying orbital angular momentum can be improved by using meta-atom. However, conventional PVLs exhibit nonuniform field profiles according to the incident polarization states owing to the spin-orbital interaction (SOI) effect observed during SPP excitation. This paper describes a method of compensating for SOI of PVL by using the geometric phase of distributed nanoslits in a gold film. By designing the orientation angles of slit pairs, the anti-phase of the SOI effect can be generated for compensatory effect. In addition, polarization-independent PVLs are designed by applying a detour phase based on the position of the slit pairs. PVLs for center-, off-center-, and multiple-focus cases are demonstrated and measured via a near-field scanning microscope.