Julien Pellé

Julien Pellé


Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 May 2023 in Metals
Verified
Journal Article
Open access
PDF file
MAMAHADO SAID AHMED
MAHADO SAID AHMED
Mounim LebriniMounim Lebrini
Mounim Lebrini
BLBenoit Lescop
Benoit Lescop
JPJulien Pellé
Julien Pellé
SRStephane Rioual
Stephane Rioual
CRChristophe Roos
Christophe Roos
The atmospheric corrosion of copper exposed in Martinique (Caribbean Sea) for 1 year was reported. This island suffered the stranding of sargassum algae, which decompose and release toxic gases such as hydrogen sulfide (H2S) or ammonia (NH3). Four sites in Martinique (France) more or less impacted by sargassum algae strandings were selected. The corrosion rate was studied via mass loss determination. The morphology and properties of the corrosion products were determined using Scanning Electron Microscopy (SEM) coupled with energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD). The samples were exposed for up to 12 months. The mass loss results after 1-year exposure were from 4.8 µm for the least impacted site to 325 µm for the site most affected by sargassum algae. This very high value proves that the presence of sargassum algae caused a significant degradation of copper. The morphological structures and properties of the corrosion products obtained at the impacted and non-impacted sites differed significantly. In the absence of sargassum algae, classical corrosion products of copper were reported such as Cu2O and Cu2Cl(OH)3. In the sites near the stranding of the sargassum algae, the CuS product is the main corrosion product obtained, but copper hydroxylsulfate is created.

30 May 2021 in Sustainability
Verified
Journal Article
Open access
PDF file
SRStephane Rioual
Stephane Rioual
BLBenoit Lescop
Benoit Lescop
JPJulien Pellé
Julien Pellé
GRGerusa De Alkmim Radicchi
Gerusa De Alkmim Radicchi
GCGilles Chaumat
Gilles Chaumat
dominique thierrydominique thierry
dominique thierry
The control of air quality in museums or storages is of fundamental interest for the conservation of historic artifacts. The present work reports an example of application of RFID sensors developed in the European project SensMat and dedicated to this issue. The sensors are based on the variation of property of an RFID tag coupled with a sensitive silver thin film exposed to the environment. As it will be described in the paper, such low-cost sensors are interrogated by a commercial reader and provide the environmental corrosivity index and thus the presence of pollutants. The selected case study concerns the monitoring of pollution by H2S in a building dedicated to conservation and restoration of archeological and historical woods. The ability of sensors to map spatially the corrosivity within buildings is highlighted.