Mounim Lebrini

Prof. Mounim Lebrini

orcid

Research Focus & Metrics

Academic Career Length

4Years (2023-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
19 May 2023 in Metals
Verified
Journal Article
Open access
PDF file
MAMAHADO SAID AHMED
MAHADO SAID AHMED
Mounim LebriniMounim Lebrini
Mounim Lebrini
BLBenoit Lescop
Benoit Lescop
JPJulien Pellé
Julien Pellé
SRStephane Rioual
Stephane Rioual
CRChristophe Roos
Christophe Roos
The atmospheric corrosion of copper exposed in Martinique (Caribbean Sea) for 1 year was reported. This island suffered the stranding of sargassum algae, which decompose and release toxic gases such as hydrogen sulfide (H2S) or ammonia (NH3). Four sites in Martinique (France) more or less impacted by sargassum algae strandings were selected. The corrosion rate was studied via mass loss determination. The morphology and properties of the corrosion products were determined using Scanning Electron Microscopy (SEM) coupled with energy-dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD). The samples were exposed for up to 12 months. The mass loss results after 1-year exposure were from 4.8 µm for the least impacted site to 325 µm for the site most affected by sargassum algae. This very high value proves that the presence of sargassum algae caused a significant degradation of copper. The morphological structures and properties of the corrosion products obtained at the impacted and non-impacted sites differed significantly. In the absence of sargassum algae, classical corrosion products of copper were reported such as Cu2O and Cu2Cl(OH)3. In the sites near the stranding of the sargassum algae, the CuS product is the main corrosion product obtained, but copper hydroxylsulfate is created.

13 December 2023 in Coatings
Verified
Journal Article
Open access
PDF file
Prescilla LambertPrescilla Lambert
Prescilla Lambert
MAMAHADO SAID AHMED
MAHADO SAID AHMED
charafeddine Jamacharafeddine Jama
charafeddine Jama
Mounim LebriniMounim Lebrini
Mounim Lebrini
The aim of this work is to develop new organic bio-sourced inhibitors that are ecofriendly and biodegradable. These natural inhibitors are organic, non-toxic molecules derived from plant extracts, containing numerous secondary metabolites, and are capable of being highly effective in protecting metals against corrosion. This study concerns the extraction, characterization and electrochemical study of natural organic compounds extracted from a species of Sargassum abundant on the coasts of Martinique, Sargassum fluitans III. The objective is to inhibit the corrosion of carbon steel. Electrochemical impedance spectroscopy (EIS) and linear polarization (LP) techniques have led to new experimental results showing inhibitor efficacy. The results obtained show that this plant extract could serve as an effective inhibitor for the C38 steel in acidic media. Studies on the phytochemicals of the crude extract were also carried out. Electrochemical studies, on each chemical families present, were also established to find the main constituents responsible for corrosion inhibition properties of the algae extract. The adsorption of Sargassum fluitans III extract on the C38 steel surface, obeys the Langmuir adsorption isotherm.

7 June 2024 in Metals
Verified
Journal Article
Open access
PDF file
MAMAHADO SAID AHMED
MAHADO SAID AHMED
BLBenoit Lescop
Benoit Lescop
JPJulien Pellé
Julien Pellé
SRStephane Rioual
Stephane Rioual
CRChristophe Roos
Christophe Roos
Mounim LebriniMounim Lebrini
Mounim Lebrini
This article aims to investigate the atmospheric corrosion of carbon steel in a marine environment abundant in hydrogen sulfide (H2S) resulting from the decomposition of Sargassum seaweed. To accomplish this, four sites with varying degrees of impact were chosen along the coast of Martinique. The corrosion rates of steel were evaluated through mass loss measurements. After one year of exposure, the corrosion rates were notably high, particularly in atmospheres rich in Cl− ions and H2S, ranging from 107 µm to 983 µm. Complementing these findings, surface and product morphologies were characterized using scanning electron microscopy (SEM) coupled with energy dispersive X-ray spectroscopy (EDS) and X-ray diffraction (XRD). These analyses revealed a significant degradation of the corrosion surface in the most affected atmospheres compared to those unaffected by Sargassum seaweed strandings. Lepidocrocite (γFeOOH) was identified as the predominant product regardless of the exposure atmosphere. However, goethite (αFeOOH) was found to be present in atmospheres most impacted by H2S.

3 May 2024
Verified
Book Chapter
Open access
PDF file
Mounim LebriniMounim Lebrini
Mounim Lebrini
Plant extracts are used as corrosion inhibitors in various industrial applications. They can be employed as active compounds with corrosion inhibiting properties as they often contain natural compounds, such as alkaloids, polyphenols, flavonoids, tannins, and terpenes. They can be utilized in the formation of a protective film, in which active compounds extracted from plants can form a protective film on the metal surface, thus preventing corrosion by isolating the metal from the corrosive environment. They can also exhibit specific inhibitory action, where certain compounds extracted from plants can react specifically with metal ions released during the corrosion process, thus forming stable complexes that delay or prevent corrosion. Plant extracts are often perceived as more environmentally friendly alternatives to synthetic corrosion inhibitors, as they are generally biodegradable and nontoxic. Plant extracts can be used in industries, such as the petroleum industry, food industry, and drinking water production, where corrosion can cause significant damage. However, it should be noted that the effectiveness of plant extracts as corrosion inhibitors may vary depending on various factors, such as the chemical composition of the extract, concentration, metal substrate, and environmental conditions. Comprehensive studies are required to assess their effectiveness in specific applications.

19 July 2025 in Metals
Verified
Journal Article
Open access
PDF file
MOMohamed Omari
Mohamed Omari
KBKhalid Bouiti
Khalid Bouiti
SJSaid Jebbari
Said Jebbari
NLNabil Lahrache
Nabil Lahrache
ABAli Barhoumi
Ali Barhoumi
ATAbdessamad Tounsi
Abdessamad Tounsi
This study explores the corrosion inhibition of C38 steel in a 1 M hydrochloric acid (HCl) solution using a novel benzoxazole-2-thione compound. The inhibitor was synthesized and structurally characterized by both 1H NMR (DMSO-d6/TMS) and 13C NMR spectroscopy. Electrochemical techniques, including Tafel polarization and electrochemical impedance spectroscopy, were employed to evaluate the inhibition performance. The results indicate that the benzoxazole-2-thione significantly reduces the corrosion rate, achieving a maximum inhibition efficiency of 95.25% at a concentration of 10−4 M. To gain deeper insights into the inhibition mechanism, theoretical methods such as density functional theory, Monte Carlo simulations, and molecular dynamics were applied to investigate the adsorption behavior of the compound on the steel surface. The adsorption process follows the Langmuir isotherm model, suggesting the coexistence of physisorption and chemisorption interactions. Surface morphology and elemental composition analyses using scanning electron microscopy coupled with energy-dispersive X-ray spectroscopy (SEM-EDX) confirm the formation of a protective inhibitor film on the steel surface.

6 May 2025 in Metals
Verified
Journal Article
Open access
PDF file
MSMahado Said-Ahmed
Mahado Said-Ahmed
Mounim LebriniMounim Lebrini
Mounim Lebrini
The inhibitory effect of the alkaloid extract from Chimarrhis cymosa on C38 steel corrosion in 1M HCl was examined through electrochemical investigations. An inhibition efficiency of 90% was achieved with 200 mg/L of the alkaloid extract from Chimarrhis cymosa at 25 °C. Potentiodynamic polarization revealed that the extract acts as a mixed-type inhibitor. Nyquist plots showed that an increase in the concentration of the alkaloid extract from Chimarrhis cymosa led to an increase in charge-transfer resistance and a decrease in double-layer capacitance, resulting in enhanced inhibition efficiency. The adsorption of inhibitor molecules followed the Langmuir adsorption isotherm. XPS analysis confirmed the formation of an inhibitor layer on the steel surface containing the Chimarrhis cymosa alkaloidic extract.