Sangwon Cho

Mr. Sangwon Cho

Sung Kyun Kwan University
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
9 May 2022 in Materials
Verified
Journal Article
Open access
PDF file
Sangwon ChoSangwon Cho
Sangwon Cho
GKGeon-Il Kim
Geon-Il Kim
SKSang-Jin Ko
Sang-Jin Ko
JYJin-Seok Yoo
Jin-Seok Yoo
YJYeon-Seung Jung
Yeon-Seung Jung
JKJung-Gu Kim
Jung-Gu Kim
This study investigated the hydrogen embrittlement (HE) characteristics of advanced high-strength steels (AHSSs). Two different types of AHSSs with a tensile strength of 1.2 GPa were investigated. Slow strain rate tests (SSRTs) were performed under various applied potentials (Eapp) to identify the mechanism with the greatest effect on the embrittlement of the specimens. The SSRT results revealed that, as the Eapp increased, the elongation tended to increase, even when a potential exceeding the corrosion potential was applied. Both types of AHSSs exhibited embrittled fracture behavior that was dominated by HE. The fractured SSRT specimens were subjected to a thermal desorption spectroscopy analysis, revealing that diffusible hydrogen was trapped mainly at the grain boundaries and dislocations (i.e., reversible hydrogen-trapping sites). The micro-analysis results revealed that the poor HE resistance of the specimens was attributed to the more reversible hydrogen-trapping sites.

8 May 2021 in Materials
Verified
Journal Article
Open access
PDF file
Sangwon ChoSangwon Cho
Sangwon Cho
SKSang-Jin Ko
Sang-Jin Ko
JYJin-Seok Yoo
Jin-Seok Yoo
YYYun-Ha Yoo
Yun-Ha Yoo
YSYon-Kyun Song
Yon-Kyun Song
JKJung-Gu Kim
Jung-Gu Kim
This study investigated the effect of Cr alloying element on the corrosion properties of automotive carbon steel (0.1C, 0.5Si, 2.5Mn, Fe Bal., composition given in wt.%) in aqueous and atmospheric conditions using electrochemical measurement and cyclic corrosion tests. Three steels with 0, 0.3, and 0.5 wt.% Cr were studied by electrochemical impedance spectroscopy. Polarization resistance (Rp) of 0.3 Cr and 0.5 Cr steels was higher than that of 0 Cr steel, and the Rp also increased as the Cr content increased. Therefore, Cr increases the corrosion resistance of automotive carbon steel immersed in a chloride ion (Cl−)-containing aqueous solution. In the cyclic corrosion test results, Cl− was concentrated at the metal/rust interface in all of the steels regardless of Cr content. The Cl− was uniformly concentrated and distributed on the 0 Cr steel, but locally and non-uniformly concentrated on the Cr-added steels. The inner rust layer consisted of β-FeOOH containing Cl− and Cr-goethite, while the outer rust layer was composed of amorphous iron oxyhydroxide mixed with various types of rust. FeCl2 and CrCl3 are formed from the Cl− nest developed in the early stage, and the pitting at CrCl3-formed regions are locally accelerated because Cr is strongly hydrolyzed to a very low pH.

1 June 2026 in Surfaces and Interfaces
Verified
Journal Article
Closed access
EPEun-Ha Park
Eun-Ha Park
JPJun-Yeop Park
Jun-Yeop Park
HJHa-Yeong Jo
Ha-Yeong Jo
Sangwon ChoSangwon Cho
Sangwon Cho
MPMinjae Park
Minjae Park
JKJung-Gu Kim
Jung-Gu Kim