Kamilla Abdildina

Mrs. Kamilla Abdildina

orcid

Research Focus & Metrics

Academic Career Length

7Years (2020-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
15 November 2023 in Molecules
Verified
Journal Article
Open access
PDF file
KAKamilla Abdildina
Kamilla Abdildina
GVGulzira Vassilina
Gulzira Vassilina
AAAlbina Abdrassilova
Albina Abdrassilova
IKIvan A. Klassen
Ivan A. Klassen
RORaigul Orynbassar
Raigul Orynbassar
FKFatima M. Kanapiyeva
Fatima M. Kanapiyeva
One of the valuable fractions of paraffinic oils is the diesel fraction, which can be used as a commercial fuel. However, the high content of alkanes of normal structure (~10–40%) in the diesel fraction leads to a deterioration in the performance characteristics of the fuel and, as a result, the inability to use the diesel fraction without additional processing in the cold season at lower temperatures, which is critical for many regions with cold winters. The process of catalytic dewaxing is one of the most promising ways to improve the low-temperature characteristics of diesel fractions. This work is devoted to studying the activity of promoted Ni, Mo, and Ni-Mo catalysts based on mesoporous aluminosilicate and pre-activated bentonite in dewaxing diesel fractions. The effect of the nature and content of promoting additives on the activity of bifunctional catalysts in the process of hydroisodewaxing of diesel fraction in a flow-type reactor in the temperature range of 260–340 °C, pressure of 2 MPa and feed space velocity of 1 h–1 was studied. It is shown that the synthesized bifunctional catalysts based on mesoporous aluminosilicate and pre-activated bentonite from the Tagan field (Ni/MAS-H-bentonite, Mo/MAS-H-bentonite, and Ni-Mo/MAS-H-bentonite) have the necessary balance of Lewis and Bronsted acid centers strengths. It allows them to selectively conduct the hydroisodewaxing process. It has been established that the use of the synthesized 5% Ni-1% Mo/MAS-H-bentonite bifunctional catalyst in the diesel fractions hydroisodewaxing process under optimal process conditions makes it possible to obtain diesel fuel with low-temperature characteristics that meet the requirements for cold climate fuels: cold filter plugging point (CFPP)—minus 33 °C, flash point in a closed cup—39 °C and pour point—minus 36 °C.

29 March 2024 in Bulletin of Shakarim University. Technical Sciences
Verified
Journal Article
Open access
PDF file
AAAlbina Abdrassilova
Albina Abdrassilova
GVG. Vassilina
G. Vassilina
KAKamilla Abdildina
Kamilla Abdildina
FKFatima M. Kanapiyeva
Fatima M. Kanapiyeva
GVGulzira Vassilina
Gulzira Vassilina
ФКФ. М. Канапиева
Ф. М. Канапиева
The limitation on the content of aromatic hydrocarbons and sulfur is associated with environmental requirements according to Euro-5 standards. Upon combustion, these substances release highly toxic compounds into the atmosphere, adversely affecting human health and the surrounding environment. Additionally, a high concentration of aromatic hydrocarbons in diesel fuel significantly degrades its quality, leading to soot formation and reducing its cetane number. According to Euro-5 standards, the content of polycyclic aromatic hydrocarbons and sulfur compounds should not exceed 8% and 10 mg/kg, respectively. To address the challenge of producing high-quality diesel fuels, the hydrotreatment process is employed in the presence of heterogeneous catalysts.The article presents the synthesis of mesoporous aluminosilicates and bifunctional catalysts based on them to study the activity of the hydrotreatment process for a model mixture. The obtained samples were investigated using various physico-chemical methods such as SEM, low-temperature nitrogen adsorption/desorption, XRD, and FT-IR. It was established that the Ni/MAS-H-bentonite and Mo/MAS-H-bentonite catalysts exhibit high activity and selectivity in the hydrotreatment process under optimal conditions (240°C, 3 MPa, and 0.5 h-1).

15 December 2020 in SERIES CHEMISTRY AND TECHNOLOGY
Verified
Journal Article
Closed access
KAKamilla Abdildina
Kamilla Abdildina
GVG.K. Vassilina
G.K. Vassilina
AAAlbina Abdrassilova
Albina Abdrassilova
АKА.R. Khaiyrgeldinova
А.R. Khaiyrgeldinova
ТVТ.к. Vassilina
Т.к. Vassilina
АKА.к. Kaldybayeva
А.к. Kaldybayeva
In the article, the synthesis of mesoporous aluminosilicates was carried out according to the developed methods, in which tetraethylorthosilicate Si(OC2H5)4 was used as a source of silicon, secondary aluminum butoxide (sec-BuO)3Al and aluminum triisopropoxide Al(i-OPr)3 were used as aluminum's sources. The synthesis of mesostructured aluminosilicate is based on the method of copolycondensation of silicon and aluminum sources in the presence of alcohol. Hexadecylamine (HDA, C16H33NH2) was used as a template for the formation of a porous structure. The physicochemical characteristics of the synthesized structured mesoporous aluminosilicates have been studied. It was found that the synthesized materials MAS-1 and MAS-2 possess high specific surface area from 511 to 1170.0 m2/g. The presence of a mesoporous and ordered structure in the synthesized aluminosilicates is confirmed by the data of low-temperature nitrogen adsorption/desorption, X-ray diffraction and FT-IR. To determine the relative strength of Brønsted and Lewis acid sites on the surface of mesoporous aluminosilicates, diffuse reflectance infrared Fourier transform spectroscopy (DRIFT) of adsorbed pyridine samples was carried out. DRIFT analysis data demonstrated a majority of Lewis acid sites on the surface of the synthesized materials. We are currently studying the possibility of applying these materials as acidic components of bifunctional catalysts for petrochemical N E W S OF THE NATIONAL ACADEMY OF SCIENCES OF THE REPUBLIC OF KAZAKHSTAN SERIES CHEMISTRY AND TECHNOLOGY ISSN 2224-5286 https://doi.org/10.32014/2020.2518-1491.94 Volume 6, Number 444 (2020), 22 – 29 UDC 665.64.097.3 MRNTI 61.51.17, 61.51.19 К.M. Umbetkaliyeva1,2, G.K. Vassilina1,2, А.К. Abdrassilova1 , А.R. Khaiyrgeldinova2, Т.К. Vassilina2,3, Zh.Y. Zakirov1, М.Kh. Taliyeva2 , А.К. Kaldybayeva2 1al-Farabi Kazakh National University, Almaty, Kazakhstan; 2SRIfor New Chemical Technologies and Materials, Almaty, Kazakhstan; 3Кazakh National Agrarian University, Almaty, Kazakhstan. E-mail: kamilla.u.m21@mail.ru, v_gulzira@mail.ru, albina06.07@mail.ru, asyltas_2008@mail.ru, v_tursunai@mail.ru, abuzhassulan@gmail.com, taliyevamadina@gmail.com, kaldybayeva.assylai@gmail.com SYNTHESIS AND PHYSICOCHEMICAL CHARACTERISTICS OF MESOPOROUS ALUMINOSILICATES In the article, the synthesis of mesoporous aluminosilicates was carried out according to the developed methods, in which tetraethylorthosilicate Si(OC2H5)4 was used as a source of silicon, secondary aluminum butoxide (sec-BuO)3Al and aluminum triisopropoxide Al(i-OPr)3 were used as aluminum's sources. The synthesis of mesostructured aluminosilicate is based on the method of copolycondensation of silicon and aluminum sources in the presence of alcohol. Hexadecylamine (HDA, C16H33NH2) was used as a template for the formation of a porous structure. The physicochemical characteristics of the synthesized structured mesoporous aluminosilicates have been studied. It was found that the synthesized materials MAS-1 and MAS-2 possess high specific surface area from 511 to 1170.0 m2/g. The presence of a mesoporous and ordered structure in the synthesized aluminosilicates is confirmed by the data of low-temperature nitrogen adsorption/desorption, X-ray diffraction and FT-IR. To determine the relative strength of Brønsted and Lewis acid sites on the surface of mesoporous aluminosilicates, diffuse reflectance infrared Fourier transform spectroscopy (DRIFT) of adsorbed pyridine samples was carried out. DRIFT analysis data demonstrated a majority of Lewis acid sites on the surface of the synthesized materials. We are currently studying the possibility of applying these materials as acidic components of bifunctional catalysts for petrochemical processes.

1 January 2025 in Open Chemistry
Verified
Journal Article
Open access
PDF file
GVGulzira Vassilina
Gulzira Vassilina
KAKamilla Abdildina
Kamilla Abdildina
AAAlbina Abdrassilova
Albina Abdrassilova
This study investigates the influence of hydroisodewaxing process parameters, specifically pressure and feed space velocity, on the performance characteristics of diesel fuel, including the cold filter plugging point and pour point. The experiments were performed using bifunctional catalysts – Ni/MAS-H-bentonite, Mo/MAS-H-bentonite, and Ni–Mo/MAS-H-bentonite – developed for this purpose. The process was carried out at a fixed temperature of 320°C, with feed space velocity varying from 0.5 to 2.0 h −1 and pressure ranging from 1.0 to 3.0 MPa. Among the tested catalysts, the bimetallic Ni–Mo/MAS-H-bentonite exhibited superior performance, achieving an optimal balance between product yield and low-temperature properties under operating conditions of 2.0 MPa and a feed space velocity of 1.0 h −1 . These findings highlight the potential of the Ni–Mo/MAS-H-bentonite catalyst for enhancing the cold flow properties (CFPs) of diesel fuel while maintaining high efficiency in hydroisodewaxing processes. This study highlights significant environmental and practical benefits by introducing cost-effective, environmentally friendly catalysts. Utilizing locally sourced bentonite from Kazakhstan reduces reliance on imports and minimizes the carbon footprint. By employing inexpensive and abundant nickel and molybdenum as promoters for the catalysts, the optimized hydroisodewaxing process enhances CFPs of diesel fuels and minimizes yield losses, improving fuel efficiency and lowering maintenance costs.

30 June 2026 in Chemical Bulletin of Kazakh National University
Verified
Journal Article
Open access
PDF file
AAAlbina Abdrassilova
Albina Abdrassilova
GVG. Vassilina
G. Vassilina
KAKamilla Abdildina
Kamilla Abdildina
TATleutai Abildin
Tleutai Abildin
This study investigates the effect of dibenzothiophene on the hydrogenation of aromatic hydrocarbons over bifunctional catalysts based on mesoporous Al-HMS aluminosilicates. Mesoporous aluminosilicate materials with different Si/Al ratios varying from 10 to 70 were synthesized and employed as supports for Ni-Mo-Al-HMS-H-bentonite catalysts. The physico-chemical features of the materials were characterized using ICP-OES, nitrogen physisorption at low temperatures, XRD, FTIR, and pyridine adsorption FTIR spectroscopy. Catalytic activity was evaluated in the hydrogenation of a model mixture of 2-methylnaphthalene and n-hexadecane at temperatures between 220-300°C and at 6 MPa H2. The optimal catalytic performance was observed for the sample with a Si/Al ratio of 10, displaying high conversion and selectivity to 2-methyldecalin as a result of sufficient Brønsted and Lewis acidity. The presence of dibenzothiophene leads to a decrease in conversion and selectivity due to sulfur-induced catalyst poisoning and shifts the optimal reaction temperature from 240 to 260°C. These findings highlight the important role of acid properties of mesoporous aluminosilicates in hydrogenation and hydrotreatment processes of aromatic compounds.