Styrene‐butadiene‐styrene (SBS)‐modified asphalt has been widely used in high‐grade pavement due to its excellent road performance. However, environmental factors will lead to continuous deterioration of SBS‐modified asphalt; thus, it is difficult for asphalt pavement to meet the demands of long‐term service. In recent years, graphene oxide (GO) has attracted the attention of scholars due to its excellent compatibility and modification effect when used as an asphalt modifier. Based on previous studies, this study explored the characteristic evolution of GO/SBS composite‐modified asphalt during aging. To achieve this goal, GO and the SBS polymer were blended to prepare GO/SBS composite, which was then used to prepare the modified asphalt. Pure SBS and the GO/SBS composite were investigated by gel permeation chromatography (GPC), Fourier transform infrared spectroscopy (FTIR), and thermogravimetry (TG). In addition, the GO/SBS‐modified asphalt and SBS‐modified asphalt were studied by FTIR, fluorescence microscope (FM), dynamic shear oscillatory (DSR) test, and multiple‐stress creep recovery (MSCR) test. The results indicated that the incorporation of GO inhibited the deterioration of the asphalt binder and relieved the degradation of the SBS modifier during the thermo‐oxidative aging and photo‐oxidative aging processes. Based on the results extracted from the curves of the original samples in the FTIR analysis, it was concluded that GO was combined by physical blending in SBS and SBS‐modified asphalt. The TG test results verified that the GO powder could ameliorate the thermal stability of SBS. Moreover, GO improved the antirutting performance of the original SBS‐modified asphalt, while the GO/SBS‐modified asphalt had relatively poorer antirutting performance compared to the SBS‐modified asphalt after the same aging tests. The reason was that the increment of antirutting performance of asphalt binder by aging process was inhibited by GO.
1 January 2024 in Mathematical Biosciences and Engineering
The fatigue property of the recycled mixture affects the structural design of recycled pavement. In order to explore the effect of different reclaimed asphalt pavement (RAP) content on the fatigue properties of recycled mixtures, the fatigue properties of recycled mixtures were analyzed through an indoor fatigue test and finite element numerical simulation. Based on the phenomenological method and the dissipated energy theory, the fatigue properties of recycled mixtures with different RAP contents were analyzed and the fatigue damage of the mixtures were also studies under various strain levels. Based on the finite element numerical model of fatigue damage, the stress distribution and internal damage field distribution of trabecular specimens under different temperatures, strain levels and RAP contents were analyzed. The results showed that the anti-fatigue level of the mixture decreased as the RAP content was increased. The relative change rate of dissipated energy for different types of mixtures showed a two-stage change rule with the change of load times, that is, the value is large and decreasing, and the value is small and stable. The correlation between the plateau value (PV) and the fatigue life was established under the double logarithm coordinates, which could better analyze the influence law of the RAP content on the fatigue performance of the recycled mixture. Under different temperatures, strain levels, and RAP contents, the stress at the bottom of trabecular specimen and the overall damage field were mainly generated at the upper part under compressive stress and the bottom under tensile stress, and the damage field distribution area accounted for a small part of the whole specimen. According to the test results and fatigue damage distribution, it is recommended that the content of recycled aggregate in recycled asphalt mixtures be less than 30% to ensure good performance. The research results have important practical significance for the improvement of fatigue performance and engineering application of recycled mixtures.
17 November 2022 in Mathematical Problems in Engineering
Large deformation, collapse, and destruction of supporting structure occurred many times due to rainfall in Xiaohegou tunnel, which is located at Taixing Railway in Shanxi Province. In this paper, the Xiaohegou tunnel is taken as an example, and the large deformation numerical simulation method is used to reproduce the collapse process of the slope at the entrance and the internal section of the tunnel. The reasons for the failure of the original initial support of the tunnel are analyzed, and the failure mechanism of the support structure of the expansive loess tunnel was clarified. The results show that the rainfall leads to the destruction of the tunnel support and the decrease of the bearing capacity of the support structure, which results in the collapse of the tunnel.
Long-distance natural gas pipelines can often pass through the common slope safely. However, when pipelines inevitably pass through high and steep slopes(HSS) for some reasons, it is difficult for engineers to predict the stress state of pipelines. Therefore, in order to investigate the safety of natural gas pipelines in HSS areas, the finite element simulation calculation model of the pipeline in HSS was established. The predicted numerical model shows that the maximum Von Mises stress and axial strain of the pipeline in the HSS area appear at the lower elbow of the pipeline, which should be paid more attention to in the risk assessment; The stress and deformation of the pipeline is mainly related with the wall thickness and internal pressure, appropriately increasing the wall thickness and reducing the internal pressure can improve the safety of HSS pipelines.
Aiming at the problem of driver's perception lag and low utilization efficiency of space-time resources in expressway ramp confluence area, based on the preemptive spatiotemporal trajectory Adjustment system, from the perspective of coordinating spatiotemporal resources, the reasonable value of safe space-time distance in trajectory pre-preparation is quantitatively analyzed. The minimum safety gap required for ramp vehicles to merge into the mainline is analyzed by introducing double positioning error and spatiotemporal trajectory tracking error. A merging control strategy for autonomous driving heterogeneous vehicles is proposed, which integrates vehicle type, driving intention, and safety spatiotemporal distance. The specific confluence strategies of ramp target vehicles and mainline cooperative vehicles under different vehicle types are systematically expounded. A variety of traffic flow and speed scenarios are used for full combination simulation. By comparing the time-position-speed diagram, the vehicle operation characteristics and the dynamic difference of confluence are qualitatively analyzed, and the average speed and average delay are used as the evaluation indices to quantitatively evaluate the performance advantages of the preemptive cooperative confluence control strategy. The results show that the maximum average delay improvement rates of mainline and ramp vehicles are 90.24 % and 74.24 %, respectively. The proposed strategy can effectively avoid potential vehicle conflicts and emergency braking behaviors, improve driving safety in the confluence area, and show significant advantages in driving stability and overall traffic efficiency optimization.
Thermal cracking in urban underground sidewalls is frequently observed when structures are cast in summer and enter service in winter, as seasonal temperature gradients act under structural restraint. To quantify the local stress field associated with pre-existing cracks, an orthogonal finite-element simulation matrix of 16 combinations is constructed. Distributions of maximum principal stress () at the surface crack tip and along the upper half of the crack bottom are evaluated using steady-state thermal loading and a linear-elastic constitutive model. Across all cases, pronounced tensile stress concentration occurs at both locations: the maximum ranges from 19.2 to 34.1 MPa at the crack surface end and from 17.2 to 29.4 MPa at the crack bottom. These concentrated values are consistently higher than the stress level at the same locations in an otherwise identical uncracked wall, clarifying how seasonal temperature gradients under restraint amplify local stresses around existing defects. The quantitative ranges reported here provide a basis for risk screening and for formulating practical mitigation measures (e.g., joint spacing and insulation strategies) in the design and operation of urban underground enclosure walls. In addition, three-dimensional simulations of randomly distributed internal voids show that adopting average forming temperature increases the peak tensile stress on void surfaces from 3.42 to 4.40 MPa at 10 deg C and from 5.98 to 6.96 MPa at -5 deg C, further highlighting the risk amplification effect of AFT under cold service conditions.