Ground reinforcement using bolts is effective for underground excavations. The ground response of expansive loess tunnels with bolt reinforcement remains poorly understood. Therefore, this paper proposes an analytical solution for bolted rock in expansive ground using the convergence-confinement method. On the basis of the bilinear strength criterion for rock mass, a computational procedure was used to obtain the ground reaction curve (GRC) for expansive loess tunnels with bolt reinforcement. The proposed approach considers ground expansion stress and geometrical parameters, mechanical parameters, and pretension of bolts. The results confirm the positive influence of bolt reinforcement and the negative influence of expansion stress on the GRC. Bolt reinforcement offers good resistance against harmful expansion stress and improves the overall stability of loess tunnels. When the expansion stress of an expansive loess tunnel reaches a certain limit, bolt reinforcement is necessary for tunnel stability. This critical limiting value of the expansion stress can be evaluated using the proposed approach. The proposed analytical solution provides guidelines for the stability estimation of tunnel excavations in expansive ground.
17 November 2022 in Mathematical Problems in Engineering
Large deformation, collapse, and destruction of supporting structure occurred many times due to rainfall in Xiaohegou tunnel, which is located at Taixing Railway in Shanxi Province. In this paper, the Xiaohegou tunnel is taken as an example, and the large deformation numerical simulation method is used to reproduce the collapse process of the slope at the entrance and the internal section of the tunnel. The reasons for the failure of the original initial support of the tunnel are analyzed, and the failure mechanism of the support structure of the expansive loess tunnel was clarified. The results show that the rainfall leads to the destruction of the tunnel support and the decrease of the bearing capacity of the support structure, which results in the collapse of the tunnel.
25 September 2017 in KSCE Journal of Civil Engineering
In the numerical simulation of heterogeneous materials, such as jointed rock mass, it is extremely difficult to perform meshing for constricted regions, resulting in time-consuming modeling and inaccurate computations. To this end, this paper presents a hybrid method of polygonal and quadrilateral elements based on the finite element method. The function of barycentric rational interpolation from the mean value principle is introduced and the shape function of the polygonal element is established. The polygonal element can be directly used for meshing constricted regions of the heterogeneous material. Moreover, it avoids the singular matrix and time-consuming meshing due to the particular geometry of this region. The coupling process of the polygonal element and quadrilateral element is demonstrated. The proposed hybrid method was implemented in several benchmarks examples to demonstrate its accuracy and capabilities. Quantitative comparisons of the numerical method and analytical solutions showed good approximation. The proposed hybrid method has advantages of improved preprocessing efficiency, simple implementation, high accuracy, and robustness compared with the conventional finite element method. In addition, this method is significant for the numerical modeling of complex geometries and provides a better solution for heterogeneous materials in engineering practice.
29 August 2020 in Mathematical Problems in Engineering
To achieve numerical simulation of large deformation evolution processes in underground engineering, the barycentric interpolation test function is established in this paper based on the manifold cover idea. A large-deformation numerical simulation method is proposed by the double discrete method with the fixed Euler background mesh and moving material points, with discontinuous damage processes implemented by continuous simulation. The material particles are also the integration points. This method is called the manifold cover Lagrangian integral point method based on barycentric interpolation. The method uses the Euler mesh as the background integral mesh and describes the deformation behavior of macroscopic objects through the motion of particles between meshes. Therefore, this method can avoid the problem of computation termination caused by the distortion of the mesh in the calculation process. In addition, this method can keep material particles moving without limits in the set region, which makes it suitable for simulating large deformation and collapse problems in geotechnical engineering. Taking a typical slope as an example, the results of a slope slip surface obtained using the manifold cover Lagrangian integral point method based on barycentric interpolation proposed in this paper were basically consistent with the theoretical analytical method. Hence, the correctness of the method was verified. The method was then applied for simulating the collapse process of the side slope, thereby confirming the feasibility of the method for computing large deformations.