The severe deterioration of a cement asphalt (CA) mortar layer may lead to the movement of the upper concrete slab and impair the safety of the speedy train. In this study, a test specimen simulating the structure of high-speed rail track slabs was embedded with delaminated cracks in various lateral sizes inside the CA mortar layer. Impact–echo tests (IE) were performed above the flawed and flawless locations. In present study, the IE method is chosen to assess defects in the CA mortar layer. Both traditional IE and normalized IE are used for data interpolation. The normalized IE are the simulated transfer function of the original IE response. The peak amplitudes in the normalized amplitude spectrum and the peak frequency in the traditional amplitude spectrum for the top concrete overlay were used to develop simple indicators for identifying the integrity of the CA mortar layer. The index was based on the difference of the experimental peak amplitude and frequency of the ones calculated from previously developed formulas for plates without substrates. As a result, the technique does not require an experimental baseline for the crack assessment. A field test and analysis procedure for evaluating high-speed rail slab systems are proposed.
Using ultrasonic pulse velocity (UPV) testing has long been regarded as an effective approach for evaluating concrete strength; however, because of the influence of numerous factors (e.g., mixture proportion, type of coarse aggregate, pozzolanic admixture, and age of the concrete), the relationship between UPV and concrete strength cannot be conclusively determined, thus hindering the application of this approach. The objective of this paper is to develop a unified equation for prediction of concrete strength at various ages using the ultrasonic pulse velocity. Firstly, this study investigated the relationship between the UPV evolution index and the strength evolution index of normal concrete with various mixture proportions, coarse aggregate types, and ages. Subsequently, the influence of adding pozzolanic materials on this relationship was considered. The experimental results showed that excellent correlation between the UPV evolution index and the strength evolution index was found and a unified equation was established in this study through regression analysis to represent the relationship between the UPV and the strength evolution index. Finally, the applicability of the unified equation was verified by data obtained from different studies. The results indicated that for all concrete specimens more than 3 days old, the error of the strength estimation decreased to within ±15%, demonstrating that this unified equation has substantial value for application in decision-making processes for major construction procedures (e.g., applying post tensioning or removing formwork supports).
The objective of this paper is to develop a nondestructive test technique based on stress wave propagation for evaluating the repair quality of concrete. Concrete structures frequently exist various types of cracks due to inferior environment and excessive loading. There are several crack repairing technique used in concrete construction. Epoxy-injection is the one used mostly in crack repairing. In this paper, a newly developed technique based on the stress wave was used to evaluate the repair quality of concrete crack. Numerical results show that the stress wave propagation of the impact-echo tests is capable of identifying the infill of epoxy-injection in the crack of repaired structures. The new technique under development has a high potential for evaluation of the quality of the repaired cracks.
To detect delamination and internal void defects within sandwich composite materials, such as those used in wind turbine blades, this study employs a Remote Impact Test (RIT), analyzing the dispersion characteristics of the generated stress waves. RITs were conducted on specimens that varied in both thickness and defect type. Time–frequency spectrograms and dispersion curves were then obtained using two time–frequency analysis techniques: wavelet analysis and reassigned spectrograms (derived from Short–Time Fourier Transformation). The accuracy of defect identification is demonstrably improved through the cross–examination of the findings from these methods.
This study evaluates the bonding condition of concrete slabs with varying porosity levels (20% to 80%) at cold joint interfaces by analyzing surface wave dispersion velocity profiles. A dual-receiver setup was employed to compare the waveform and dispersion characteristics along the test lines that crossed cold joints and those that did not. While wave velocity was reduced for lower wavelengths at lower void levels, more significant reductions were observed across the entire wavelength range at higher porosity levels. This demonstrates that Rayleigh wave dispersion can effectively assess cold joints generated by artificial voids with known void ratios.