joel guidez

Mr. joel guidez


Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
12 August 2021 in Journal of Nuclear Engineering and Radiation Science
Verified
Journal Article
Closed access
PDF file
JGjoel guidez
joel guidez
JBJanos Bodi
Janos Bodi
KMKonstantin Mikityuk
Konstantin Mikityuk
EGEnrico Girardi
Enrico Girardi
JBJeremy Bittan
Jeremy Bittan
BCBernard Carluec
Bernard Carluec
The European Sodium Fast Reactor Safety Measures Assessment and Research Tools (ESFR-SMART) project offers innovative options for a sodium fast reactor (SFR) to improve its safety. This paper explains the preliminary calculations made on the main options to roughly verify their feasibility. Design propositions and calculations are here provided of the following innovative options: elimination of the safety vessel, innovative decay heat removal systems (DHRS), core catcher, thermal pumps, and secondary loops. In conclusion, all these options seem able to fulfill the key points of new safety rules for Generation-IV reactors. A status of the research and development (R&D) effort necessary to validate these new options is also proposed.

22 November 2017 in EPJ Nuclear Sciences & Technologies
Verified
Journal Article
Open access
PDF file
JGjoel guidez
joel guidez
ASAnne Saturnin
Anne Saturnin
During the operation of a nuclear reactor, the external individual doses received by the personnel are measured and recorded, in conformity with the regulations in force. The sum of these measurements enables an evaluation of the annual collective dose expressed in man·Sv/year. This information is a useful tool when comparing the different design types and reactors. This article discusses the evolution of the collective dose for several types of reactors, mainly based on publications from the NEA and the IAEA.The spread of good practices (optimization of working conditions and of the organization, sharing of lessons learned, etc.) and ongoing improvements in reactor design have meant that over time, the doses of various origins received by the personnel have decreased.In the case of sodium-cooled fast reactors (SFRs), the compilation and summarizing of various documentary resources has enabled them to be situated and compared to other types of reactors of the second and third generations (respectively pressurized water reactors in operation and EPR under construction). From these results, it can be seen that the doses received during the operation of SFR are significantly lower for this type of reactor.

16 April 2021 in Journal of Nuclear Engineering and Radiation Science
Verified
Journal Article
Closed access
PDF file
JBJeremy Bittan
Jeremy Bittan
CBClement Bore
Clement Bore
JGjoel guidez
joel guidez
In the frame of the ESFR-SMART European project, aiming at improving the safety level of the European sodium cooled fast reactor (ESFR), this paper presents the preliminary assessment of decay heat removal systems (DHRSs) in the ESFR-SMART design: the role of natural air convection around steam generators (SGs) outer shells in accidental conditions. Both theoretical and CATHARE code (thermal hydraulics reference code) calculations are presented. The impact of an additional chimney at the top of each casing as well as running primary and secondary pumps on the heat removal capacity is equally evaluated. This paper shows that the evacuation of decay heat thanks to completely passive air natural circulation alone, in case of Fukushima like accident, should lead to temperatures of sodium in the reactor vessel temporarily exceeding the safety criterion of 650 °C. The addition of chimneys increases the capacities but is not sufficient to evacuate the decay heat safely. If the primary and secondary side pumps are running, the safety criterion should be met.

22 February 2021 in EPJ Web of Conferences
Verified
Journal Article
Open access
PDF file
JGjoel guidez
joel guidez
AGAntoine Gerschenfeld
Antoine Gerschenfeld
JBJanos Bodi
Janos Bodi
KMKonstantin Mikityuk
Konstantin Mikityuk
FÁFrancisco Álvarez-Velarde
Francisco Álvarez-Velarde
UDU. Diaz-Chiron
U. Diaz-Chiron
Even before Fukushima accident occurred, the safety authorities have required that new power plant designs must take into account beyond design-basis accidents including possible core meltdown. Among the mitigation strategies, the corium retention must be ensured, so a core catcher is implemented in the design of the Generation IV Sodium-cooled Fast Reactor. An internal core catcher within the vessel (in-vessel retention) is the option chosen for the European Sodium-cooled Fast Reactor investigated in the H2020 ESFR-SMART project. The new core investigated in ESFR SMART with lower void effect has a better behavior in case of severe accident. The use of passive control rods is also an improvement for prevention of severe accident. Moreover, we have in the ESFR SMART core dedicated tubes for corium discharge that should allow discharging quickly the melted materials and should help to prevent large criticality. Calculations show that after several seconds, these discharge tubes begin to open, and the corium arrives by this preferential way on the core catcher, quicker and in limited quantities at the beginning of the accident. However, the core catcher is designed to be able to retain the whole core meltdown. Its design allows good possibilities of cooling by natural convection of sodium. Some thermal calculations were provided with a multi-layer concept but the global mechanical conception seems difficult. So a one layer core catcher in molybdenum, material compatible with sodium and used on the core catcher of the last SFR, started in 2016: BN 800, is investigated. Explanations are given on the choice of this material proposed for the catcher and used for thermal calculations. With the proposed design, the corium is spread on the core catcher and the residual power of the corium can be dispelled by natural convection by the sodium circulating around and above the core catcher without boiling of sodium if the melted core is less than about 25% of whole core. In case of bigger quantities of melted core, boiling of sodium could appear under the core catcher. Further less conservative calculations would be necessary to better know the limit.

12 August 2021 in Journal of Nuclear Engineering and Radiation Science
Verified
Journal Article
Closed access
PDF file
JGjoel guidez
joel guidez
JBJanos Bodi
Janos Bodi
KMKonstantin Mikityuk
Konstantin Mikityuk
EGEnrico Girardi
Enrico Girardi
BCBernard Carluec
Bernard Carluec
Following up the previous collaborative project on European sodium fast reactor (CP-ESFR project), the European sodium fast reactor—safety measures assessment and research tools (ESFR-SMART project) considers the safety objectives envisaged for generation-IV reactors, taking into account the lessons learned from the Fukushima accident, in order to increase the ESFR safety level. In accordance with these objectives, guidelines have been defined to drive the ESFR-SMART developments, mainly simplifying the design and using all the positive features of sodium fast reactors (SFR), such as low coolant pressure, efficiency of natural convection, possibility of decay heat removal (DHR) by atmospheric air, high thermal inertia, and long grace period before a human intervention is needed. In this paper, a set of new ambitious safety measures is introduced for further evaluation within the project. The proposed set aims at consistency with the main lines of safety evolutions since the Fukushima accident. The paper gives a first review of the new propositions to enhance the ESFR safety, leading to a simplified reactor, forgiving and including a lot of passivity. This first version is supported by the various project tasks in order to assess the relevance of the whole design in comparison to the final safety objectives.

29 October 2021 in Journal of Nuclear Engineering and Radiation Science
Verified
Journal Article
Closed access
PDF file
JGjoel guidez
joel guidez
JBJanos Bodi
Janos Bodi
KMKonstantin Mikityuk
Konstantin Mikityuk
EGEnrico Girardi
Enrico Girardi
Based on feedback from existing reactors and current projects, the European sodium fast reactor-safety measures assessment and research tools (ESFR-SMART) project proposes an optimization of the secondary circuit with the main aim of improving safety. Besides, the optimization also leads to a simplification of the circuits and, therefore, to a reduction of the cost of the reactor. For the implementation of the proposed new design option, some points require further research and development (R&D) to validate their feasibility.