The decay heat rate of five spent nuclear fuel assemblies of the pressurized water reactor type were measured by calorimetry at the interim storage for spent nuclear fuel in Sweden. Calculations of the decay heat rate of the five assemblies were performed by 20 organizations using different codes and nuclear data libraries resulting in 31 results for each assembly, spanning most of the current state-of-the-art practice. The calculations were based on a selected subset of information, such as reactor operating history and fuel assembly properties. The relative difference between the measured and average calculated decay heat rate ranged from 0.6% to 3.3% for the five assemblies. The standard deviation of these relative differences ranged from 1.9% to 2.4%.
5 September 2016 in EPJ Nuclear Sciences & Technologies
The European Sodium Fast Reactor Safety Measures Assessment and Research Tools (ESFR-SMART) project offers innovative options for a sodium fast reactor (SFR) to improve its safety. This paper explains the preliminary calculations made on the main options to roughly verify their feasibility. Design propositions and calculations are here provided of the following innovative options: elimination of the safety vessel, innovative decay heat removal systems (DHRS), core catcher, thermal pumps, and secondary loops. In conclusion, all these options seem able to fulfill the key points of new safety rules for Generation-IV reactors. A status of the research and development (R&D) effort necessary to validate these new options is also proposed.
In the framework of the Horizon 2020 project ESFR-SMART (2017–2021), the European sodium fast reactor (ESFR) core was updated through a safety-related modification and optimization of the core design from the earlier FP7 CP-ESFR project (2009–2013). This study is dedicated to neutronic analyses of the improved ESFR core design. The conducted work is reported in two parts. Part I deals with the evaluation of the safety-related neutronic parameters of the fresh beginning-of-life (BOL) core carried out by eight organizations using both continuous energy Monte Carlo and deterministic computer codes. In addition to the neutronics characterization of the core, a special emphasis was put on the calibration and verification of the computational tools involved in the analyses. Part II is devoted to once-through and realistic batchwise burnup calculations aiming at the establishing of the equilibrium core state, which will later serve as a basis for detailed safety analyses.