Francesco Conte

Prof. Francesco Conte

University of Milan
orcid

Research Focus & Metrics

Academic Career Length

6Years (2021-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
20 February 2021 in Eng
Verified
Journal Article
Open access
PDF file
Ilenia RossettiIlenia Rossetti
Ilenia Rossetti
FCFrancesco Conte
Francesco Conte
Gianguido RamisGianguido Ramis
Gianguido Ramis
Methods to treat kinetic data for the biodegradation of different plastic materials are comparatively discussed. Different samples of commercial formulates were tested for aerobic biodegradation in compost, following the standard ISO14855. Starting from the raw data, the conversion vs. time entries were elaborated using relatively simple kinetic models, such as integrated kinetic equations of zero, first and second order, through the Wilkinson model, or using a Michaelis Menten approach, which was previously reported in the literature. The results were validated against the experimental data and allowed for computation of the time for half degradation of the substrate and, by extrapolation, estimation of the final biodegradation time for all the materials tested. In particular, the Michaelis Menten approach fails in describing all the reported kinetics as well the zeroth- and second-order kinetics. The biodegradation pattern of one sample was described in detail through a simple first-order kinetics. By contrast, other substrates followed a more complex pathway, with rapid partial degradation, subsequently slowing. Therefore, a more conservative kinetic interpolation was needed. The different possible patterns are discussed, with a guide to the application of the most suitable kinetic model.

15 April 2022 in Materials
Verified
Journal Article
Open access
PDF file
FCFrancesco Conte
Francesco Conte
Ilenia RossettiIlenia Rossetti
Ilenia Rossetti
Gianguido RamisGianguido Ramis
Gianguido Ramis
CVCyril Vaulot
Cyril Vaulot
SHSamar Hajjar-Garreau
Samar Hajjar-Garreau
Simona BENNICISimona BENNICI
Simona BENNICI
Photo-catalysts based on titanium dioxide, and modified with highly dispersed metallic nanoparticles of Au, Ag, Pd and Pt, either mono- or bi-metallic, have been analyzed by multiple characterization techniques, including XRD, XPS, SEM, EDX, UV-Vis and N2 adsorption/desorption. Mono-metallic photo-catalysts were prepared by wet impregnation, while bi-metallic photocatalysts were obtained via deposition-precipitation (DP). The relationship between the physico-chemical properties and the catalyst’s behavior for various photo-synthetic processes, such as carbon dioxide photo-reduction to liquid products and glucose photo-reforming to hydrogen have been investigated. Among the tested materials, the catalysts containing platinum alone (i.e., 0.1 mol% Pt/TiO2) or bi-metallic gold-containing materials (e.g., 1 wt% (AuxAgy)/TiO2 and 1 wt% (AuxPtz)/TiO2) showed the highest activity, presenting the best results in terms of productivity and conversion for both applications. The textural, structural and morphological properties of the different samples being very similar, the main parameters to improve performance were function of the metal as electron sink, together with optoelectronic properties. The high activity in both applications was related to the low band gap, that allows harvesting more energy from a polychromatic light source with respect to the bare TiO2. Overall, high selectivity and productivity were achieved with respect to most literature data.

5 February 2021 in Catalysts
Verified
Journal Article
Open access
PDF file
EBElnaz Bahadori
Elnaz Bahadori
FCFrancesco Conte
Francesco Conte
Antonio TripodiAntonio Tripodi
Antonio Tripodi
Gianguido RamisGianguido Ramis
Gianguido Ramis
Ilenia RossettiIlenia Rossetti
Ilenia Rossetti
Photocatalysis has been used for the oxidation of ammonia/ammonium in water. A semibatch photoreactor was developed for this purpose, and nanostructured TiO2-based materials, either commercial P25 or prepared by flame spray pyrolysis (FSP), were used as catalysts. In the present work, we investigated the effect of (i) metal co-catalysts, (ii) pH, and (iii) ammonia concentration on the efficiency of oxidation and on the selectivity to the undesired overoxidation byproduct, i.e., nitrites and nitrates. Several metals were added to both titania samples, and the physicochemical properties of every sample were studied by XRD, BET, and UV-Vis spectroscopy. The pH, which was investigated in the range of 2.5–11.5, was the most important parameter. The optimum pH values, resulted as 11.5 and 4.8 for P25 and FSP respectively, matching the best compromise between an acceptable conversion and a limited selectivity toward nitrite and nitrate formation. For both titania samples (P25 and FSP), ammonia conversion vs. nitrite and nitrate formation were highly dependent on the pH. At pH ≥ 9, the initial rate of photooxidation was high, with selective formation of overoxidized byproducts, whereas, at a more acidic pH, the conversion was lower, but the selectivity toward nitrogen formation was higher. P25 samples added with noble metal co-catalysts (0.1 mol% Ag, Au, Pd, Pt) at pH = 11.5 remarkably increased the selectivity to nitrite and nitrate, while, in the case of FSP samples (pH = 4.8), the co-catalysts increased the selectivity toward N2 with respect to the unpromoted catalyst and also the conversion in the case of Au and Pt. Reactivity was discussed, leading to the proposing of a mechanism that correlates the activity with either surface adsorption (depending of the surface charge of the catalyst and on pH) or the homogeneous reactivity of oxidizing species.

12 December 2022 in Catalysts
Verified
Journal Article
Open access
PDF file
FCFrancesco Conte
Francesco Conte
Elisa Isabel Garcia-LopezElisa Isabel Garcia-Lopez
Elisa Isabel Garcia-Lopez
Giuseppe MarcìGiuseppe Marcì
Giuseppe Marcì
Claudia BianchiClaudia Bianchi
Claudia Bianchi
Gianguido RamisGianguido Ramis
Gianguido Ramis
Ilenia RossettiIlenia Rossetti
Ilenia Rossetti
In the current research, the productivity of CO2 photoreduction has been boosted by performing the reaction in an innovative photocatalytic reactor, which allows for operation up to 20 bar. A set of photocatalysts were used, including three types of pristine TiO2, i.e., one commercially prepared (Evonik P25), one home-prepared by flame spray pyrolysis (FSP), and one obtained by the hydrolysis of TiCl4 (TiO2exCl), a bare thermo-exfoliated carbon nitride (C3N4-TE), and binary materials composed of TiO2 and C3N4-TE. The photoreduction was carried out in water at pH 14 and in the presence of Na2SO3 as a hole scavenger. Hydrogen and very small amounts of CO were detected in the head space of the photoreactor, while in the liquid phase, the main product was formic acid, along with traces of methanol and formaldehyde. The composites P25/TE and TiO2exCl/TE were found to have a higher productivity if compared to its single constituents used alone, probably due to the heterojunction formed by coupling the two materials. Moreover, the high pressure applied in the photoreactor proved to be very effective in boosting the yield of the organic products.

27 June 2023 in Energies
Verified
Journal Article
Open access
PDF file
MTMatteo Tommasi
Matteo Tommasi
FCFrancesco Conte
Francesco Conte
MAMohammad Imteyaz Alam
Mohammad Imteyaz Alam
Gianguido RamisGianguido Ramis
Gianguido Ramis
Ilenia RossettiIlenia Rossetti
Ilenia Rossetti
The photocatalytic reduction of CO2 into solar fuel is considered a promising approach to solving the energy crisis and mitigating the environmental pollution caused by anthropogenic CO2 emission. Some powder photocatalysts have been demonstrated as efficient, but their drifting properties, along with difficult separation (catalyst and product), make continuous mode reaction very challenging, particularly in the liquid phase. In order to make this process commercially viable and economically more efficient, we have developed a simple and scalable method for immobilizing TiO2 P25 over the surface of glass slides using an organic-based surfactant. Improved adhesion properties and the homogeneous dispersion of catalyst nanoparticles were achieved. A holder was designed with 3D printing technology in such a way that it can hold up to six slides that can be dipped simultaneously into the suspension or solution of desired materials for a uniform and homogeneous deposition. The resulting surfaces of the dip-coated materials (e.g., TiO2 P25) were further modified by adding metallic nanoparticles and thoroughly characterized via XRD, DRS UV–Vis, SEM, and SEM–EDX. Photocatalytic tests have been performed for two major applications, viz., hydrogen production via the photoreforming of glucose and the photoreduction of CO2 into different solar fuels. The latter tests were performed in a specially designed, high-pressure reactor with Ag/P25 supported catalysts, which exhibited about three times higher formic acid productivity (ca. 20 mol/kgcat h) compared to the dispersed catalyst, with enhanced stability and recoverability. It is to note that catalysts deposited on the glass slides can easily be recovered and the materials did not show any weight loss. To the best of our knowledge, the obtained formic acid productivity is highest among the published literature.

31 January 2021 in Materials
Verified
Journal Article
Open access
PDF file
FCFrancesco Conte
Francesco Conte
Serena EspositoSerena Esposito
Serena Esposito
VSVladimiro Dal Santo
Vladimiro Dal Santo
Alessandro Di MicheleAlessandro Di Michele
Alessandro Di Michele
Gianguido RamisGianguido Ramis
Gianguido Ramis
Ilenia RossettiIlenia Rossetti
Ilenia Rossetti
Flame spray pyrolysis was used to produce nanosized Ni-based catalysts starting from different mixed oxides. LaNiO3 and CeNiO3 were used as base materials and the formulation was varied by mixing them or incorporating variable amounts of ZrO2 or SrO during the synthesis. The catalysts were tested for the steam reforming of glycerol. One of the key problems for this application is the resistance to deactivation by sintering and coking, which may be increased by (1) improving Ni dispersion through the production of a Ni-La or Ni-Ce mixed oxide precursor, and then reduced; (2) using an oxide as ZrO2, which established a strong interaction with Ni and possesses high thermal resistance; (3) decreasing the surface acidity of ZrO2 through a basic promoter/support, such as La2O3; and (4) adding a promoter/support with very high oxygen mobility such as CeO2. A further key feature is the use of a high temperature synthesis, such as flame spray pyrolysis, to improve the overall thermal resistance of the oxides. These strategies proved effective to obtain active and stable catalysts at least for 20 h on stream with very limited coke formation.