Cyril Vaulot

Dr. Cyril Vaulot

orcid

Research Focus & Metrics

Academic Career Length

10Years (2017-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 January 2022 in Materials
Verified
Journal Article
Open access
PDF file
KFKawthar Frikha
Kawthar Frikha
Lionel LimousyLionel Limousy
Lionel Limousy
JCJoan Pons Claret
Joan Pons Claret
CVCyril Vaulot
Cyril Vaulot
KPKarin Florencio Pérez
Karin Florencio Pérez
Simona BENNICISimona BENNICI
Simona BENNICI
The present study investigates the potential of waste tires to produce a valuable adsorbent material for application in wastewater treatment. In the first stage, the pyrolysis of ground rubber tire was explored using non-isothermal and isothermal thermogravimetric analysis experiments. The effect of operating parameters, such as heating rate and pyrolysis temperature, on the pyrolysis product yields was considered. The slow pyrolysis of ground rubber tire was taken up in a large-scale fixed-bed reactor for enhanced char recovery. Four pyrolysis temperatures were selected by thermogravimetric data. The product yields were strongly influenced by the pyrolysis temperature; at higher temperatures, the formation of more gases and liquid was favored, while at lower pyrolysis temperatures, more char (solid fraction) was formed. The produced chars were characterized in terms of mineral composition, textural properties, proximate analysis, and structural properties to identify the relationships between the pyrolysis temperature and the char properties. In a second step, a series of activated chars were prepared, starting from the pyrolytic chars via chemical and/or physical activation methods. Then, the activated chars were characterized and tested as adsorbents for atrazine and ibuprofen. Adsorption experiments in aqueous media were carried out in a small-scale batch reactor system. Chemical activation seems appropriate to significantly reduce the inorganic compounds initially present in ground rubber tire and contribute to an important increase in the surface area and porosity of the chars. Adsorption experiments indicated that chemically activated chars exhibit high aqueous adsorption capacity for atrazine.

15 April 2022 in Materials
Verified
Journal Article
Open access
PDF file
FCFrancesco Conte
Francesco Conte
Ilenia RossettiIlenia Rossetti
Ilenia Rossetti
Gianguido RamisGianguido Ramis
Gianguido Ramis
CVCyril Vaulot
Cyril Vaulot
SHSamar Hajjar-Garreau
Samar Hajjar-Garreau
Simona BENNICISimona BENNICI
Simona BENNICI
Photo-catalysts based on titanium dioxide, and modified with highly dispersed metallic nanoparticles of Au, Ag, Pd and Pt, either mono- or bi-metallic, have been analyzed by multiple characterization techniques, including XRD, XPS, SEM, EDX, UV-Vis and N2 adsorption/desorption. Mono-metallic photo-catalysts were prepared by wet impregnation, while bi-metallic photocatalysts were obtained via deposition-precipitation (DP). The relationship between the physico-chemical properties and the catalyst’s behavior for various photo-synthetic processes, such as carbon dioxide photo-reduction to liquid products and glucose photo-reforming to hydrogen have been investigated. Among the tested materials, the catalysts containing platinum alone (i.e., 0.1 mol% Pt/TiO2) or bi-metallic gold-containing materials (e.g., 1 wt% (AuxAgy)/TiO2 and 1 wt% (AuxPtz)/TiO2) showed the highest activity, presenting the best results in terms of productivity and conversion for both applications. The textural, structural and morphological properties of the different samples being very similar, the main parameters to improve performance were function of the metal as electron sink, together with optoelectronic properties. The high activity in both applications was related to the low band gap, that allows harvesting more energy from a polychromatic light source with respect to the bare TiO2. Overall, high selectivity and productivity were achieved with respect to most literature data.

1 September 2017 in Energies
Verified
Journal Article
Open access
PDF file
BWBéchir Wanassi
Béchir Wanassi
IHIchrak Ben Hariz
Ichrak Ben Hariz
Camelia GhimbeuCamelia Ghimbeu
Camelia Ghimbeu
CVCyril Vaulot
Cyril Vaulot
Mejdi JeguirimMejdi Jeguirim
Mejdi Jeguirim
Phenolic resin and waste cotton fiber were investigated as green precursors for the successful synthesis using a soft template approach of a composite carbon with carbon nanofibers embedded in a porous carbon network with ordered and periodically pore structure. The optimal composite carbon (PhR/NC-1), exhibited a specific surface area of 394 m2∙g−1 with the existence of both microporosity and mesoporosity. PhR/NC-1 carbon was evaluated as an adsorbent of Alizarin Red S (ARS) dye in batch solution. Various operating conditions were examined and the maximum adsorption capacity of 104 mg∙g−1 was achieved under the following conditions, i.e., T = 25 °C, pH = 3, contact time = 1440 min. The adsorption and desorption heat was assessed by flow micro-calorimetry (FMC), and the presence of both exothermic and endothermic peaks with different intensity was evidenced, meaning a partially reversible nature of ARS adsorption. A pseudo-second-order model proved to be the most suitable kinetic model to describe the ARS adsorption according to the linear regression factor. In addition, the best isotherm equilibrium has been achieved with a Freundlich model. The results show that the eco-friendly composite carbon derived from green phenolic resin mixed with waste cotton fibers improves the removal of ARS dye from textile effluents.

27 November 2020 in Materials
Verified
Journal Article
Open access
PDF file
MGMagdalena Gaca
Magdalena Gaca
CVCyril Vaulot
Cyril Vaulot
Magdalena MaciejewskaMagdalena Maciejewska
Magdalena Maciejewska
MLMagdalena Lipinska
Magdalena Lipinska
The goal of this work was to study the effect of graphene nanoplatelets (GnPs) modified with ionic liquid (IL) on properties of styrene–butadiene rubber (SBR) composites. GnPs were decorated with IL or were modified in bulk directly during rubber mix preparation. The ionic liquid used was 1-butyl-4-methylpyridinium tetrafluoroborate (BMPFB). The textural properties were studied to confirm surface modification of GnPs with BMPFB. In these investigations, the impact of the concentration of GnPs and the effect of the method of GnPs’ modification with IL on elastomers properties are described. Some thermal measurements (e.g., differential scanning calorimetry and thermogravimetry) were conducted to characterize the thermal stability or the vulcanization process of the investigated samples. Complementary experimental techniques were used to investigate the properties of the obtained elastomers, specifically tensile testing, and electrical and barrier property measurements. The deposition of IL on the GnPs’ surface positively influenced the mechanical and barrier properties of elastomers. However, samples containing graphene nanoplatelets modified from solution were characterized by less electrical conductivity. SEM analysis was additionally performed to investigate GnPs’ dispersion within SBR composites.

14 April 2022 in Catalysis Research
Verified
Journal Article
Open access
PDF file
AGAnne Galarneau
Anne Galarneau
LDLucie Desmurs
Lucie Desmurs
CVCyril Vaulot
Cyril Vaulot
HNHabiba Nouali
Habiba Nouali
Bénédicte LebeauBénédicte Lebeau
Bénédicte Lebeau
ASAlexander Sachse
Alexander Sachse
It is important to elucidate the role of the surface areas and pore volumes of hierarchical zeolites to understand their behavior as catalysts. Micro-and mesopore surface areas and volumes of the hierarchical MFI (Mobil Five zeolites) were assessed following several methods: (i) N2 adsorption at 77 K using classical and corrected t-plot analyses methods, (ii) pre-adsorption of n-nonane was followed by the study of the N2 adsorption at 77 K, and (iii) non-local-density functional theory (NLDFT) analysis using either the N2 adsorption method at 77 K or the Ar adsorption method at 87 K. In order to assess the viability of each method, a set of hierarchical MFI-type zeolites was prepared by different approaches: alkaline treatment (desilication), synthesis in clear solution (nanocrystals), synthesis in the presence of bifunctional organic surfactant (nanosheets), and micelle-templating assisted alkaline treatment. NLDFT methods could not be used to accurately determine the micro-and mesopore surface areas, as larger surface areas compared to those obtained using the BET equation were obtained. This overestimation is even more pronounced with Ar at 87 K. Results from the classical t-plot analysis performed under conditions of N2 adsorption at 77 K for mechanical mixtures of MFI and MCM-41 revealed the underestimation of the micropore volumes and the overestimation of the mesopore surface areas. Corrections were provided for t-plot analysis. The results obtained using the corrected t-plot method were in good agreement with the results obtained using the NLDFT method in the presence of Ar at 87 K during the calculation of the micro-and mesopore volumes of hierarchical MFI-type zeolites. Micropore and mesopore surface areas calculated by the corrected t-plot method were in good agreement with those calculated using the n-nonane pre-adsorption method for the hierarchical MFI-type zeolites characterized by the presence of large zeolite domains. The NLDFT method, in the presence of Ar, can be used to assess the micro-and mesopore volumes of the hierarchical zeolites at 87 K. However, it cannot be used to determine the surface areas. The corrected t-plot method can be used to efficiently calculate both the volumes and surface areas.

16 December 2022 in Materials
Verified
Journal Article
Open access
PDF file
EKEva Kinnertová
Eva Kinnertová
Václav SlovákVáclav Slovák
Václav Slovák
TZTomáš Zelenska
Tomáš Zelenska
CVCyril Vaulot
Cyril Vaulot
LDLuc Delmotte
Luc Delmotte
The porosity of differently wetted carbonaceous material with disordered mesoporosity was investigated using low-field 1H NMR relaxometry. Spin–spin relaxation (relaxation time T2) was measured using the CPMG pulse sequence. We present a non-linear optimization method for the conversion of relaxation curves to the distribution of relaxation times by using non-specialized software. Our procedure consists of searching for the number of components, relaxation times, and their amplitudes, related to different types of hydrogen nuclei in the sample wetted with different amounts of water (different water-to-carbon ratio). We found that a maximum of five components with different relaxation times was sufficient to describe the observed relaxation. The individual components were attributed to a tightly bounded surface water layer (T2 up to 2 ms), water in small pores especially supermicropores (2 < T2 < 7 ms), mesopores (7 < T2 < 20 ms), water in large cavities between particles (20–1500 ms), and bulk water surrounding the materials (T2 > 1500 ms). To recalculate the distribution of relaxation times to the pore size distribution, we calculated the surface relaxivity based on the results provided by additional characterization techniques, such as thermoporometry (TPM) and N2/−196 °C physisorption.