Towards the utilization of Cu2O nanomaterial for the degradation of industrial dye pollutants such as methylene blue and methyl orange, the graphene-incorporated Cu2O nanocomposites (GCC) were developed via a precipitation method. Using Hummers method, the grapheme oxide (GO) was initially synthesized. The varying weight percentages (1–4 wt %) of GO was incorporated along with the precipitation of Cu2O catalyst. Various characterization techniques such as Fourier-transform infra-red (FT-IR), X-ray diffraction (XRD), UV–visible diffused reflectance (UV-DRS), Raman spectroscopy, thermo gravimetric analysis (TGA), energy-dispersive X-ray analysis (EDX), and electro chemical impedance (EIS) were followed for characterization. The cabbage-like morphology of the developed Cu2O and its composites were ascertained from field-emission scanning electron microscopy (FESEM) and high-resolution transmission electron microscopy (HR-TEM). In addition, the growth mechanism was also proposed. The results infer that 2 wt % GO-incorporated Cu2O composites shows the highest value of degradation efficiency (97.9% and 96.1%) for MB and MO at 160 and 220 min, respectively. Further, its catalytic performance over visible region (red shift) was also enhanced to an appreciable extent, when compared with that of other samples.
1 August 2023 in Inorganic Chemistry Communications
In the current work, CuMoO4 nanosheets (CuMoO4 NSs) were synthesized by using the co-precursor approach, and then structural, morphological, optical, and electrochemical properties of the synthesized CuMoO4 NSs were examined employing Fourier transform-infrared spectroscopy (FTIR), X-ray diffraction (XRD), UV–Vis diffuse reflectance spectroscopy (UV–DRS), thermogravimetric analysis (TGA), and field-emission scanning electron microscopy (FESEM). The XRD result depicted that the synthesized CuMoO4 NSs have an orthorhombic phase, and the average crystallite size of CuMoO4 NSs is about 19.57 nm. FESEM images confirmed the nanosheet-like structure of the samples. The CuMoO4 exhibited characteristic metal oxide bond vibrations as determined by FTIR spectroscopy. As a consequence, a more selective spectral region was therefore identified from UV–Visible spectra, and the band gap value was found to be 1.73 eV. For electrochemical performances, the prepared electrode material shows a high energy density of 85.12 Wh kg–1 and the power density of 449 W kg–1, a capacity retention of 88% after 5000 cycles of charge and discharge, and a specific capacitance of 681 F g–1 at 0.5 A for galvanostatic charge–discharge analysis.
29 November 2023 in Zeitschrift für Physikalische Chemie
Electrocoagulation is an efficient treatment for the concurrent elimination organic and inorganic contaminants from tannery wastewater. The batch electrocoagulation investigations were carried out using mild steel and aluminium as sacrificial anodes and stainless steel as the cathode. Various operating constraints, such as the electrolyte pH, realistic current density, electrolysis time, effluent concentration and supporting electrolyte concentration were appraised to study their effects on electro-coagulation efficiency. The maximum Total Organic Carbon (TOC) removal has been observed was 90 % and 77 % under optimum operating conditions, and the maximum chromium removal has been recorded was 99 % and 90 % using mild steel and aluminium anodes respectively. The experimental data was also fitted with the first order kinetic model. The experimental data were investigated with the Langmuir and Freundlich adsorption isotherm models. The result shows that the experimental data fitted with the Langmuir isotherm model, with a rate of confidence of 0.98, using mild steel as an anode. The solid sludge and the liquid samples were characterized using the SEM (scanning electron microscopy) EDX (energy dispersive X-ray spectrometry), FT-IR (Fourier transform infrared spectrometer) and UV–Visible (Ultraviolet–visible spectroscopy) analyses. All experimental results show that mild steel was an efficient anode, for the instantaneous elimination of organic and inorganic contaminants from tannery wastewater.
7 November 2023 in Biomass Conversion and Biorefinery