Khaikal Ramadhan

Mr. Khaikal Ramadhan


Research Focus & Metrics

Academic Career Length

5Years (2022-Present)

(Calculated once Scilit publication data is synced: current year − year of first publication + 1)

Representative Publications

View All Publications
30 November 2022 in Jurnal Penelitian Pendidikan IPA
Verified
Journal Article
Open access
PDF file
DIDedi Irawan
Dedi Irawan
KRKhaikal Ramadhan
Khaikal Ramadhan
AAAzhar Azhar
Azhar Azhar
In this work, we carried out a numerical investigation of the PCF-SPR biosensor for the early detection of infected skin cancer cells and healthy cells. The study was conducted using the COMSOL Multiphysics-based FEM method. The dielectric material used in this PCF design is fused silica, while the plasmonic material is gold. The study was conducted to test the effect of the thickness of the plasmonic layer and the size of the air hole diameter on the PCF-SPR. It was found that the larger the diameter of the air hole in the proposed sensor gives a smaller confinement loss value, while the thicker the plasmonic material used also gives a small confinement loss value. The proposed PCF-SPR has a wavelength sensitivity in detecting skin cancer-infected cells of 7000 nm/RIU. These results indicate that the proposed sensor has a good performance in detecting cells infected with skin cancer.

1 October 2024 in Emerging Science Journal
Verified
Journal Article
Open access
PDF file
KRKhaikal Ramadhan
Khaikal Ramadhan
ASAndi M. N. F. Syamsul
Andi M. N. F. Syamsul
AMArip Marwan
Arip Marwan
BABeny Agustirandi
Beny Agustirandi
MYMhd Yasir
Mhd Yasir
HCHadi Christian
Hadi Christian
In this work, we report the capability of a PCF-SPR sensor with an elliptical core, which has high sensitivity, and it is explained using a machine learning approach. The sensor component consists of fused silica as the background material, TiO2 as the adhesive material between the dielectric material and the plasmonic material, and Au was chosen as plasmonic material with optimal thicknesses of 35 nm for TiO2and 45 nm for Au. Numerical results show that the sensor component has a high sensitivity of 24,000 nm/RIU for four modes that have consistent shifts, including x-polarized, x-odd, y-polarized, and y-odd. Meanwhile, AS maximums were found of -91.82 1/RIU for x-polarized, -91.88 1/RIU for y-polarized, -90.98 1/RIU for x-odd, and -89.276 1/RIU for y-odd respectively, on the refractive index of the analyte of 1,365 RIU. The ML algorithm was used to optimize the sensor parameters, and it was found that the algorithm had a very low MSE of 0.00083; this result is better than the previous report work. Doi: 10.28991/ESJ-2024-08-05-07 Full Text: PDF

30 April 2022 in Jurnal Penelitian Pendidikan IPA
Verified
Journal Article
Open access
PDF file
DIDedi Irawan
Dedi Irawan
AAAzhar Azhar
Azhar Azhar
KRKhaikal Ramadhan
Khaikal Ramadhan
The effect of dispersion will interfere with the signal transmission. Several ways can be done in compensating the dispersion such as by utilizing dispersion compensator fiber (DCF) or chirp fiber Bragg grating (CFBG). The dispersion compensation schemes with DCF are expensive and it also causes nonlinear optical effects, meanwhile, the CFBG can reduce costs and promise better results. In this study, an Apodization Chirped Fiber Bragg Grating (ACFBG) has been developed as a dispersion compensator with Optisystem with non-return to zero (NRZ) 20 Gbps. It is found that the Gaussian Cubic-CFBG apodization with a size of 90 mm had the highest Q-factor evaluation of 20,776 dB for a 250 km dispersion compensation scheme. this result is much larger than the previous CFBG dispersion compensation scheme. This study also confirmed that the Gaussian Apodization was the best profile compared to Tanh Apodization, from the evaluation of the Q-factor, Tanh cubic-CFBG only obtained a Q-factor of 9.6 dB. Certainly, the high performance of ACFBG as a dispersion compensator is very useful to support optical communication systems

1 October 2022 in Indonesian Journal of Electrical Engineering and Computer Science
Verified
Journal Article
Open access
PDF file
DIDedi Irawan
Dedi Irawan
KRKhaikal Ramadhan
Khaikal Ramadhan
SSSaktioto Saktioto
Saktioto Saktioto
FFFitmawati Fitmawati
Fitmawati Fitmawati
DHDwi Hanto
Dwi Hanto
BWBambang Widiyatmoko
Bambang Widiyatmoko
In this paper, we investigate a hexagonal two-layer photonic crystal fiber based on surface plasmon resonance (HT-PCF-SPR) which is easy to fabricate as a sensor for detecting the refractive index of analytes. After performing numerical simulations using COMSOL multiphysics based on the finite element method (FEM), it was found that the HT-PCF-SPR could detect the analyte's refractive index in the range 1.34-1.37 RIU and in the wavelength range from 730 nm to 810 nm. The plasmonic material used in the design is gold with a thickness of 40 nm which is located outside the layer and in two opposite air holes in the core. The HT-PCF-SPR design has good performance in detecting analytes, it is found that the sensitivity in detecting analytes is 2,000 nm/RIU, meaning that every 1 RIU shift of analyte shifts the wavelength by 2000 nm. Meanwhile, the sensor resolution obtained from the design is 6.67×10-5 RIU, and it is found that the larger the air hole, the greater the confinement loss value.

30 April 2022 in Jurnal Penelitian Pendidikan IPA
Verified
Journal Article
Open access
PDF file
AAAzhar Azhar
Azhar Azhar
DIDedi Irawan
Dedi Irawan
KRKhaikal Ramadhan
Khaikal Ramadhan
This paper reports the implementation of the STEM learning strategy to the 20 physics students on optical physics concepts. Previously, student understanding on this subject was categorized as weak, this was caused by not only learning just carried out theoretically but also the student's limitation to figure out the optical phenomenon. This research is to identify the student learning outcomes before and after STEM implementation by using simple experimental work with a set of pre-test and post-test. The calculation results show that the student's outcome has a medium enhancement which is about 0.53. Certainly, a Stem learning strategy is a good choice as a teaching strategy in the Optical Physics subject.

31 July 2022 in Jurnal Penelitian Pendidikan IPA
Verified
Journal Article
Open access
PDF file
KRKhaikal Ramadhan
Khaikal Ramadhan
DIDedi Irawan
Dedi Irawan
AAAzhar Azhar
Azhar Azhar
Fiber Bragg grating (FBG) sensors have limitations in measuring high and extreme temperatures because in general FBG sensors are made of silica fiber, which at high temperatures can interfere with the mechanical performance of the materials. In this paper, we propose an S-FBG (Sapphire Fiber Bragg Grating) sensor which is resistant to extreme environmental influences and high temperatures. By developing S-FBG to measure high temperatures, it is found that S-FBG has high sensitivity, every 10C change is obtained and the Bragg wavelength shifts as far as 30.24 nm, this result is greatly influenced by the thermo-optic coefficient, and the coefficient of expansion-thermal. The design also evaluates the Gaussian apodization profile to improve sensor accuracy in monitoring temperature.