Artisanal and small-scale gold mining (ASGM) is the leading global source of anthropogenic mercury (Hg) release to the environment. Top-down mercury reduction efforts have had limited results, but a bottom-up embrace of cyanide (CN) processing could eventually displace mercury amalgamation for gold recovery. However, ASGM transitions to cyanidation nearly always include an overlap phase, with mercury amalgamation then cyanidation being used sequentially. This paper uses a transdisciplinary approach that combines natural and social sciences to develop a holistic picture of why mercury and cyanide converge in gold processing and potential impacts that may be worse than either practice in isolation. We show that socio-economic factors drive the comingling of mercury and cyanide practices in ASGM as much or more so than technical factors. The resultant Hg-CN complexes have been implicated in increasing the mobility of mercury, compared to elemental mercury used in Hg-only processing. To support future inquiry, we identify key knowledge gaps including the role of Hg-CN complexes in mercury oxidation, transport, and fate, and possible links to mercury methylation. The global extent and increase of mercury and cyanide processing in ASGM underscores the importance of further research. The immediacy of the problem also demands interim policy responses while research advances, though ultimately, the well-documented struggles of mercury reduction efforts in ASGM temper optimism about policy responses to the mercury-cyanide transition.

Wetlands are crucial hydrological features that provide benefits, including ecosystem services and habitat conservation, protection from flooding associated with sea level rise and extreme events, water storage and treatment, recreation, and aesthetics, among others. Peru is one of the few countries in Latin America that has not developed a national wetland inventory. While this can in part be attributed to the limited availability of peer-reviewed publications in the English literature, a larger quantity of Peruvian wetland-related publications are available in Spanish, and are less accessible to the global population. In this paper, we developed an extensive review and synthesis of the Spanish literature, including university theses, peer-reviewed articles, and government reports. Our report focuses on evaluating the state of the art of Peruvian wetlands in terms of temporal evolution, geographical distribution, vested institutions, research topics (e.g., water quality, fauna, flora, microorganisms, etc.), and advances toward the conservation of wetlands. The analysis identified 274 wetland-related publications in Spanish (188 theses, 83 peer-reviewed, and 6 government reports) and a temporal increase in dissemination over the past two decades. The reports encompassed 161 distinct wetlands distributed nationwide; however, most of the investigations focused on only a few wetland bodies with a disproportionate concentration in just three administrative regions. This reveals that wetland-related research is unevenly distributed in Peru, and highlights a need to extend this knowledge to underrepresented systems and regions. Although Peru ranks third in South America for protected (Ramsar) wetland areas, case studies have revealed that wetlands in the country are vulnerable to human activities. Recent national legislation established in 2021 should help to address this challenge, as before this time, there was a more decentralized approach, whereby each administrative region held responsibility for the protection of their own wetlands. Collective findings indicate that research activity should be increased nationally in order to better understand the function and benefits of wetlands throughout Peru, in addition to the continued development and enforcement of regulations designed to protect these valuable ecosystems. Finally, since a national Peruvian wetland inventory is urgently needed, this analysis provides a baseline for this development of, as well as identifying gaps in, knowledge needed for appropriate national representation.

To better query regional sources of metal(loid) exposure in an under-communicated region, available scientific literature from 50 national universities (undergraduate and graduate theses and dissertations), peer-reviewed journals, and reports published in Spanish and English were synthesized with a focus on metal(loid) bioaccumulation in Peruvian food and medicinal products utilized locally. The study considered 16 metal(loid)s that are known to exert toxic impacts on humans (Hg, Al, Sb, As, Ba, Be, Cd, Cr, Sn, Ni, Ag, Pb, Se, Tl, Ti, and U). A total of 1907 individual analyses contained within 231 scientific publications largely conducted by Peruvian universities were analyzed. These analyses encompassed 239 reported species classified into five main food/medicinal groups—plants, fish, macroinvertebrates and mollusks, mammals, and “others” category. Our benchmark for comparison was the World Health Organization (Codex Alimentarius) standards. The organisms most frequently investigated included plants such as asparagus, corn, cacao, and rice; fish varieties like trout, tuna, and catfish; macroinvertebrates and mollusks including crab and shrimp; mammals such as alpaca, cow, chicken eggs, and milk; and other categories represented by propolis, honey, lichen, and edible frog. Bioaccumulation-related research increased from 2 to more than 25 publications per year between 2006 and 2022. The results indicate that Peruvian food and natural medicinal products can have dangerous levels of metal(loid)s, which can cause health problems for consumers. Many common and uncommon food/medicinal products and harmful metals identified in this analysis are not regulated on the WHO’s advisory lists, suggesting the urgent need for stronger regulations to ensure public safety. In general, Cd and Pb are the metals that violated WHO standards the most, although commonly non-WHO regulated metals such as Hg, Al, As, Cr, and Ni are also a concern. Metal concentrations found in Peru are on many occasions much higher than what has been reported elsewhere. We conclude that determining the safety of food/medicinal products is challenging due to varying metal concentrations that are influenced not only by metal type but also geographical location. Given the scarcity of research findings in many regions of Peru, urgent attention is required to address this critical knowledge gap and implement effective regulatory measures to protect public health.

The centralized Rio Seco Industrial Park (RSIP) tannery collective in the Southern Peruvian city of Arequipa releases untreated tannery wastewater into a proximal creek that is a tributary of the Chili River. As industrial leather tanning wastewater contains high concentrations of metal(loid)s, salts, dyes, and organics, this complex mixture could exert a myriad of toxicological effects on the surrounding ecosystem. The RSIP effluent was analyzed to quantify the acute ecotoxicity and ecotoxicological status of this untreated industrial wastewater at multiple trophic levels with the following bioindicators: the floating macrophyte Lemna minor, invertebrates Daphnia magna and Physa venustula, and the amphibian Xenopus laevis. A physicochemical characterization of the RSIP effluent revealed a highly contaminated waste stream. In addition to chromium (10.4 ± 0.4 mg/L) and other toxic metals, the water harbored extremely high concentrations of total dissolved solids (67,770 ± 15,600 mg/L), biochemical oxygen demand (1530 ± 290 mg/L) and total nitrogen (490 ± 10 mg/L). The toxicological responses of certain bioindicator species tested were evaluated after exposure to 0, 1.5, 3.0, and 4.5% untreated tannery wastewater blended with dechlorinated tap water. L. minor experienced a significant decrease in the number of fronds, wet weight, and dry weight at the lowest blended wastewater of 1.5%. Bioassays with D. magna showed the effect on neonatal mortality with a calculated LC₅₀ of 1.1% for 48 h. Bioassays with P. venustula embryos showed high sensitivity to diluted effluent with complete mortality at 3.0% wastewater and above. Finally, X. laevis showed a high sensitivity to the dilutions with an LC₅₀ of 1.6 for embryos and 1.8% for tadpoles. Although RSIP wastewater contains many potentially toxic components, chromium and total dissolved solids, with a major contribution from sodium, are best correlated with acute toxicity variables. This suggests that conductivity or analogous measurements could provide a rapid and affordable forensic tool to query acute ecosystem pressures. Collectively, the results indicate that the release of untreated tannery wastewater from RSIP can exert pronounced acute impacts across trophic levels with the need for treatment or dilution to below 1% of total flow. As the assays addressed acute toxicity, the necessary treatment and/or dilution to mitigate chronic effects is likely much lower. In conclusion, untreated RSIP tannery wastewaters represent an ecological risk to downstream aquatic ecosystems; this needs to be addressed to prevent current and future environmental consequences.

Particulate matter smaller than 10 μm (PM₁₀) is an important air pollutant that adversely affects human health by increasing the risk of respiratory and cardiovascular diseases. Recent studies reported multiple extreme PM₁₀ levels at high altitude Peruvian cities, which resulted from a combination of high emissions and limited atmospheric circulation at high altitude. However, the emission sources of the PM₁₀ still remain unclear. In this study, we collected PM₁₀ samples from four sites (one industrial site, one urban site, and two rural sites) at the city of Arequipa, Peru, during the period of February 2018 to December 2018. To identify the origins of PM₁₀ at each site and the spatial distribution of PM₁₀ emission sources, we analyzed major and trace element concentrations of the PM₁₀. Of the observed daily PM₁₀ concentrations at Arequipa during our sampling period, 91% exceeded the World Health Organization (WHO) 24-h mean PM₁₀ guideline value, suggesting the elevated PM₁₀ strongly affected the air quality at Arequipa. The concentrations of major elements, Na, K, Mg, Ca, Fe, and Al, were high and showed little variation, suggesting that mineral dust was a major component of the PM₁₀ at all the sites. Some trace elements, such as Mn and Mo, originated from the mineral dust, while other trace elements, including Pb, Sr, Cu, Ba, Ni, As and V, were from additional anthropogenic sources. The industrial activities at Rio Seco, the industrial site, contributed to significant Pb, Cu, and possibly Sr emissions. At two rural sites, Tingo Grande and Yarabamba, strong Cu emissions were observed, which were likely associated with mining activities. Ni, V, and As were attributed to fossil fuel combustion emissions, which were strongest at the Avenida Independencia urban site. Elevated Ba and Cu concentrations were also observed at the urban site, which were likely caused by heavy traffic in the city and vehicle brake wear emissions.

The release of tannery wastewater contributes to chromium (Cr) pollution globally. Herein, we conduct a novel consolidation of research from the Arequipa region of southern Peru that integrates university theses written in Spanish alongside peer-reviewed journal articles. The objective is to provide a place-based complement to existing research in English scientific journals focused on effective tools for Cr treatment from tannery wastewater. Our consolidation categorized a total of 75 publications (70 theses and five peer-reviewed) into five distinct strategies for Cr treatment: adsorption (twenty-three studies), phytoremediation (eighteen studies), bioremediation (thirteen studies), electrocoagulation (five studies), and other techniques (fifteen studies). This synthesis highlighted potentially promising approaches that could be sustainably tailored to regional resources and waste products. This includes sorptive materials derived from food waste such as native achiote peels (B. orellana) and avocado seeds (P. americana) either used directly or as a feedstock for biochar. Other technologies include phytoremediation using microalgae and resident vascular plants and microbial bioremediation that capitalizes on indigenous bacteria and fungi. Promise was also discerned in studies that incorporated a combination of abiotic and biotic mechanisms tailored toward the region, such as infiltration using selective and bioactive materials, wetlands, solar distillation, iron-based coagulation and flocculation, and bioreactors. These findings provide a sustainable complement to prior global investigations for effective attenuation strategies by adding novel materials and techniques that could be further explored to assess the viability of implementation at pilot and larger scales. These promising technologies and the ability to tailor sustainable treatments toward local resources highlight the opportunity to prioritize the treatment of tannery wastewater to ensure a cleaner environment by informing policy makers, academics, and industry on technologies that could be adopted for implementation in the region.