Fifth generation (5G) communication systems deploy a massive MIMO technique to enhance gain and spatial multiplexing in arrays of 16 to 128 antennas. In these arrays, it is critical to isolate the adjacent antennas to prevent unwanted interaction between them. Fifth generation absorbers, in this regard, are the recent interest of many researchers nowadays. The authors present a dual-band novel metamaterial-based 5G absorber. The absorber operates at 24 GHz and 28 GHz and is composed of symmetric meander lines connected through a transmission line. An analytical model used to calculate the total number of required meander lines to design the absorber is delineated. The analytical model is based on the total inductance offered by the meander line structure in an impedance-matched electronic circuit. The proposed absorber works on the principal of resonance and absorbs two 5G bands (24 GHz and 28 GHz). A complete angular stability analysis was carried out prior to experiments for both transverse electric (TE) and transverse magnetic (TM) polarizations. Further, the resonance conditions are altered by changing the substrate thickness and incidence angle of the incident fields to demonstrate the functionality of the absorber. The comparison between simulated and measured results shows that such an absorber would be a strong candidate for the absorption in millimetre-wave array antennas, where elements are placed in proximity within compact 5G devices.

A miniaturized four-port polarization diversity ultra-wide band multiple input multiple output (MIMO) antenna is presented in this article. Different structures are combined and excited with the tapered transmission line to obtain a reduced symmetric layout with the orthogonal arrangement in compact size. An inverted-c-shape partial ground plane is used to decouple the antenna elements placed in close proximity which reduced the overall size and improved the matched impedance of the MIMO antenna. Further, impedance bandwidth is improved by etching the slots in the ground plane. The overall dimension of the proposed compact MIMO antenna is 40 × 40 × 1.524 mm³. The measured characteristics of a fabricated prototype on the FR4 laminate well matched with the simulated results. The antenna exhibits a quasi-omnidirectional radiation pattern on the H-plane throughout the operational bandwidth, with isolation greater than 16 dB, low envelope correlation, and gain variation. this antenna can efficiently be usedfor diversity applications and portable devices.

An easy-to-manufacture and efficient four-port-printed Multiple Input Multiple Output (MIMO) antenna operating across an ultra-wideband (UWB) region (2.9–13.6 GHz) is proposed and investigated here. The phenomenon of the polarization diversity is used to improve the isolation between MIMO antenna elements by deploying four orthogonal antenna elements. The proposed printed antenna (40 × 40 × 1.524 mm³) is made compact by optimizing the circular-shaped radiating components via vertical stubs on top of the initial design to maximally reduce unwanted interaction while placing them together in proximity. The measurements of the prototype MIMO antennas corroborate the simulation performance. The findings are compared to the recent relevant works presented in the literature to show that the proposed antenna is suitable for UWB MIMO applications. The proposed printed UWB MIMO antenna could be a good fit for compact portable wireless electronic devices.