The influence of background ultrasonic field on the ultimate dynamic strength of adhesive joints is studied using fracture mechanics analysis. Winkler foundation-type models are applied to describe the cohesion zone, and the incubation time fracture criterion is used. The challenging task is to study whether relatively weak ultrasound is able to decrease the threshold values of the external impact load depending on a joint model, such as an “elastic membrane” or “beam” approximation, and various boundary conditions at the ends. The specific task was to investigate the case of short pulse loading through application of time-dependent fracture criterion instead of the conventional principle of critical stress. Three different load cases, namely, step constant force, dynamic pulse, and their combination with ultrasonic vibrations, were also studied. The analytical solution to the problem demonstrates that background vibrations at certain frequencies can significantly decrease threshold values of fracture impact load. Specific calculations indicate that even a weak background sonic field is enough to cause a significant reduction in the threshold amplitude of a dynamic short pulse load. Additionally, non-monotonic dependency of threshold amplitude on pulse duration for weak background field was observed, which demonstrates the existence of optimal regimes of impact energy input. Moreover, this phenomenon does not depend on the way in which the beam edges mount, whether they are clamped or hinged, and it could be applied for micro-electro-mechanical switch design processes as an additional tool to control operational regimes.
A fundamentally new method is proposed for assessing the plastic response of a material to dynamic loading during tests of cylindrical specimens impacted against a rigid barrier. Unlike the traditional Taylor test, this study considers a temporal yield criterion based on the concept of incubation time. This approach allows for a transition from averaged rate-based estimates to a more accurate and physically grounded description of material behavior over time. Impact tests of cylindrical specimens against a rigid anvil were conducted to determine the yield strength exhibited by the material at various impact velocities. The material behavior under high rate elastoplastic deformation was investigated. The impact-on-anvil test incorporates new dynamic characteristics of the material, which define the rate sensitivity of the yield strength based on the incubation time criterion. The test results are interpreted as a time-dependent yield strength, i.e., the threshold amplitude of the impact load as a function of its duration. It is shown how the parameters that enable prediction of the rate and temporal dependence of the yield strength under arbitrary impact-wave loading can be estimated from a single test.
Разработана инкрементальная модификация релаксационной модели пластического деформирования, предложенной ранее с целью объяснения и прогноза временных эффектов нестабильности диаграмм пластического деформирования. Проведен анализ возможных сценариев в предложенной инкрементальной модели. Показано, что инкрементальный вариант релаксационной модели позволяет учесть поведение деформационных кривых на длительных временах после наступления текучести и более полно представить соответствующие временные эффекты, такие как появление (или исчезновение) «зуба текучести» и последующее немонотонное, в том числе осциллирующее, поведение диаграмм деформирования. Проведены сравнения расчетов инкрементального подхода с первоначальной версией подхода релаксационной модели и широко распространенной моделью Джонсона-Кука на примере экспериментально полученных диаграмм деформирования для двухфазной высокопрочной стали DP800 и алюминиевого сплава 2519A. Результаты расчетов подтверждают описательную и прогностическую эффективность инкрементального подхода. Важнейшей особенностью развитого подхода является то, что набор фиксированных параметров, применяемый при построении деформационной кривой, не зависит от истории, в частности скорости деформации, и связан только с особенностями развития дефектной структуры материала на микро- и мезоуровнях. Используя этот небольшой набор параметров структурно-временного подхода и релаксационной модели пластичности, можно получать различные типы деформационных кривых, реализующихся в одном материале в широком диапазоне скоростей...
1 January 2018 in Vestnik of Saint Petersburg University. Mathematics. Mechanics. Astronomy